Earthquakes and Structures

  • 제10권2호
  • /
  • Pages.261-291
  • /
  • 2016
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Influence of infill panels on an irregular RC building designed according to seismic codes

  • Ercolino, Marianna (University of Naples Federico II, Department of Structures for Engineering and Architecture) ;
  • Ricci, Paolo (University of Naples Federico II, Department of Structures for Engineering and Architecture) ;
  • Magliulo, Gennaro (University of Naples Federico II, Department of Structures for Engineering and Architecture) ;
  • Verderame, Gerardo M. (University of Naples Federico II, Department of Structures for Engineering and Architecture)
  • 투고 : 2015.02.26
  • 심사 : 2015.11.06
  • 발행 : 2016.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the seismic assessment of a real RC frame building located in Italy, designed according to the current Italian seismic code. The first part of the paper deals with the calibration of the structural model of the investigated building. The results of an in-situ dynamic identification test are employed in a sensitivity and parametric study in order to find the best fit model in terms of frequencies and modal shapes. In the second part, the safety of the structure is evaluated by means of nonlinear static analyses, taking into account the results of the previous dynamic study. In order to investigate the influence of the infills on the seismic response of the structure, the nonlinear static analyses are performed both neglecting and taking into account the infill panels. The infill panels differently change the behavior of the structure in terms of strength and stiffness at different seismic intensity levels. The assessment study also verifies the absence of brittle failures in structural elements, which could be caused by either the local interaction with infills or the failure of the strength hierarchy.

키워드

참고문헌

  1. Asteris, P.G., Cotsovos, D.M., Chrysostomou, C.Z., Mohebkhah, A. and Al-Chaar, G.K. (2013), "Mathematical micromodeling of infilled frames: State of the art", Eng. Struct., 56, 1905-1921. https://doi.org/10.1016/j.engstruct.2013.08.010
  2. Biskinis, D. and Fardis, M. (2010a), "Deformations at flexural yielding of members with continuous or lapspliced bars", Struct. Concrete, 11(3), 127-138 . https://doi.org/10.1680/stco.2010.11.3.127
  3. Biskinis, D. and Fardis, M.N. (2010b), "Flexure-controlled ultimate deformations of members with continuous or lap-spliced bars", Struct. Concrete, 11(2), 93-108. https://doi.org/10.1680/stco.2010.11.2.93
  4. Celarec, D., Ricci, P. and Dolsek, M. (2012), "The sensitivity of seismic response parameters to the uncertain modelling variables of masonry-infilled reinforced concrete frames", Eng. Struct., 35, 165-177. https://doi.org/10.1016/j.engstruct.2011.11.007
  5. CEN (2005), Eurocode 8: design of structures for earthquake resistance-Part 1: general rules, seismic actions and rules for buildings, EN 1998-1, Brussels, Belgium.
  6. Colangelo, F. (2012), "A simple model to include fuzziness in the seismic fragility curve and relevant effect compared with randomness", Earthq. Eng. Struct. Dyn., 41(5), 969-986. https://doi.org/10.1002/eqe.1169
  7. D. M. 14/01/2008 (2008a), NormeTecniche per le Costruzioni, G.U. n. 29 4 febbraio 2008. (in Italian)
  8. D. M. 14/01/2008 (2008b), NormeTecniche per le Costruzioni, G.U. n. 29 4 febbraio 2008. (in Italian)
  9. Delallera, J.C. and Chopra, A.K. (1995), "A simplified model for analysis and design of asymmetric-plan buildings", Earthq. Eng. Struct., 24(4), 573-594. https://doi.org/10.1002/eqe.4290240408
  10. Dolsek, M. (2010), "Development of computing environment for the seismic performance assessment of reinforced concrete frames by using simplified nonlinear models", Bull. Earthq. Eng., 8(6), 1309-1329. https://doi.org/10.1007/s10518-010-9184-8
  11. Dolsek, M. and Fajfar, P. (2004a), "IN2-A simple alternative for IDA", 13th World Conference on Earthquake Engineering-Paper No. 3353, Vancouver, Canada.
  12. Dolsek, M. and Fajfar, P. (2004b), "Inelastic spectra for infilled reinforced concrete frames", Earthq. Eng. Struct. Dyn., 33(15), 1395-1416. https://doi.org/10.1002/eqe.410
  13. Dolsek, M. and Fajfar, P. (2005), "Simplified non-linear seismic analysis of infilled reinforced concrete frames", Earthq. Eng. Struct. Dyn., 34(1), 49-66. https://doi.org/10.1002/eqe.411
  14. Fajfar, P. and Gaspersic, P. (1996), "The N2 method for the seismic damage analysis of RC buildings", Earthq. Eng. Struct. Dyn., 25(1), 31-46. https://doi.org/10.1002/(SICI)1096-9845(199601)25:1<31::AID-EQE534>3.0.CO;2-V
  15. Fardis, M.N. (1997), Experimental and numerical investigations on the seismic response of RC infilled frames and recommendations for code provisions, Report ECOEST-PREC8 No. 6. Prenormative research in support of Eurocode 8.
  16. Fardis, M.N. (2009), Seismic design, assessment and retrofitting of concrete buildings based on EN-Eurocode 8, Springer Dordrecht Heidelberg London New York.
  17. Fiore, A., Porco, F., Raffaele, D. and Uva, G. (2012), "About the influence of the infill panels over the collapse mechanisms actived under pushover analyses: Two case studies", Soil Dyn. Earthq. Eng., 39, 11-22. https://doi.org/10.1016/j.soildyn.2012.02.004
  18. Hak, S., Morandi, P., Magenes, G. and Sullivan, T.J. (2012), "Damage control for clay masonry infills in the design of RC frame structures", J. Earthq. Eng., 16, 1-35.
  19. Kakaletsis, D.J. and Karayannis, C.G. (2009), "Experimental investigation of infilled reinforced concrete frames with openings", ACI Struct. J., 106(2), 132-141.
  20. Kappos, A.J., Panagopoulos, G., Panagiotopoulos, C. and Penelis, G. (2006), "A hybrid method for the vulnerability assessment of R/C and URM buildings", Bull. Earthq. Eng., 4(4), 391-413. https://doi.org/10.1007/s10518-006-9023-0
  21. Kilar, V. and Fajfar, P. (1997a), "Simple push-over analysis of asymmetric buildings", Earthq. Eng. Struct., 26(2), 233-249. https://doi.org/10.1002/(SICI)1096-9845(199702)26:2<233::AID-EQE641>3.0.CO;2-A
  22. Kilar, V. and Fajfar, P. (1997b), "Simple push-over analysis of asymmetric buildings", Earthq. Eng. Struct. Dyn., 26(2), 233-249. https://doi.org/10.1002/(SICI)1096-9845(199702)26:2<233::AID-EQE641>3.0.CO;2-A
  23. Kirac, N., Dogan, M. and Ozbasaran, H. (2011), "Failure of weak-storey during earthquakes", Eng. Fail Anal., 18(2), 572-581. https://doi.org/10.1016/j.engfailanal.2010.09.021
  24. Kreslin, M. and Fajfar, P. (2010), "Seismic evaluation of an existing complex RC building", Bull. Earthq. Eng., 8(2), 363-385. https://doi.org/10.1007/s10518-009-9155-0
  25. Kreslin, M. and Fajfar, P. (2011), "The extended N2 method taking into account higher mode effects in elevation", Earthq. Eng. Struct., 40(14), 1571-1589. https://doi.org/10.1002/eqe.1104
  26. Magliulo, G., Maddaloni, G. and Cosenza, E. (2007), "Comparison between non-linear dynamic analysis performed according to EC8 and elastic and non-linear static analyses", Eng. Struct., 29(11), 2893-2900. https://doi.org/10.1016/j.engstruct.2007.01.027
  27. Magliulo, G., Maddaloni, G. and Cosenza, E. (2012), "Extension of N2 method to plan irregular buildings considering accidental eccentricity", Soil Dyn. Earthq. Eng., 43, 69-84. https://doi.org/10.1016/j.soildyn.2012.07.032
  28. Magliulo, G. and Ramasco, R. (2007), "Seismic response of three-dimensional R/C multi-storey frame building under uni-and bi-directional input ground motion", Earthq. Eng. Struct. Dyn., 36(12), 1641-1657. https://doi.org/10.1002/eqe.709
  29. Mainstone, F. (1971), "On the stiffnesses and strengths of infilled frames", Proceedings of the Institution of Civil Engineering, Supplement IV 57-90.
  30. McKenna, F. and Fenves, G.L. (2013), OpenSees Manual, Pacific Earthquake Engineering Research Center
  31. Mpampatsikos, V., Nascimbene, R. and Petrini, L. (2008), "A critical review of the RC frame existing building assessment procedure according to Eurocode 8 and Italian Seismic Code", J. Earthq. Eng., 12, 52-82. https://doi.org/10.1080/13632460801925020
  32. Panagiotakos, T.B. and Fardis, M.N. (1996), Seismic response of infilled RC frames structures, 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
  33. Rainieri, C. (2008), "Operational modal analysis for seismic protection of structures", Ph.D. Thesis, University of Naples Federico II, Italy.
  34. Rainieri, C. and Fabbrocino, G. (2014), Operational Modal Analysis of Civil Engineering Structures, Springer Science+Business Media New York.
  35. Rainieri, C., Fabbrocino, G. and Cosenza, E. (2010), "Integrated seismic early warning and structural health monitoring of critical civil infrastructures in seismically prone areas", Struct. Hlth. Monit., doi: 10.1177/1475921710373296.
  36. Rainieri, C., Fabbrocino, G. and Verderame, G.M. (2013), "Non-destructive characterization and dynamic identification of a modern heritage building for serviceability seismic analyses", Ndt&E Int., 60, 17-31. https://doi.org/10.1016/j.ndteint.2013.06.003
  37. Ricci, P., De Luca, F. and Verderame, G.M. (2011a), "6th April 2009 L'Aquila earthquake, Italy: reinforced concrete building performance", Bull. Earthq. Eng., 9(1), 285-305. https://doi.org/10.1007/s10518-010-9204-8
  38. Ricci, P., De Risi, M.T., Verderame, G.M. and Manfredi, G. (2012a), "Influence of infill presence and design tyology on seismic performance of RC buildings: fragility analysis and evaluation of code provisions at Damage Limitation Limit State", 15th World Conference on Earthquake Engineering-Paper No. 5836, Lisbon, Portugal.
  39. Ricci, P., De Risi, M.T., Verderame, G.M. and Manfredi, G. (2012b), "Influence of infill presence and design tyology on seismic performance of RC buildings: sensitivity analysis", 15th World Conference on Earthquake Engineering-Paper No. 5184, Lisbon, Portugal.
  40. Ricci, P., De Risi, M.T., Verderame, G.M. and Manfredi, G. (2013), "Influence of infill distribution and design typology on seismic performance of low-and mid-rise RC buildings", Bull. Earthq. Eng., 11(5), 1585-1616. https://doi.org/10.1007/s10518-013-9453-4
  41. Ricci, P., Verderame, G.M. and Manfredi, G. (2011b), "Analytical investigation of elastic period of infilled RC MRF buildings", Eng. Struct., 33(2), 308-319. https://doi.org/10.1016/j.engstruct.2010.10.009
  42. Uva, G., Porco, F. and Fiore, A. (2012), "Appraisal of masonry infill walls effect in the seismic response of RC framed buildings: A case study", Eng. Struct., 34, 514-526. https://doi.org/10.1016/j.engstruct.2011.08.043

피인용 문헌

  1. Vulnerability analysis of industrial RC precast buildings designed according to modern seismic codes vol.158, 2018, https://doi.org/10.1016/j.engstruct.2017.12.005
  2. Effect of masonry infill walls with openings on nonlinear response of reinforced concrete frames vol.12, pp.3, 2016, https://doi.org/10.12989/eas.2017.12.3.333
  3. Experimental Study of Gypsum-Concrete Dense-Column Composite Boards with External Thermal Insulation Systems vol.10, pp.6, 2020, https://doi.org/10.3390/app10061976