References
- Halder, P., Samad, A., Kim, J.-H., Choi, Y.-S., 2015, "High Performance Ocean Energy Harvesting Turbine Design - A New Casing Treatment Scheme," Energy, Vol. 86, pp. 219-231. https://doi.org/10.1016/j.energy.2015.03.131
- Sanger, N. L., 1970, "An Experimental Investigation of Several Low-Area Ratio Water Jet Pumps," Journal of Fluids Engineering, Vol. 92, No. 1, pp. 11-20.
- Grupping, A. W., Coppes, J. L. R., Groot, J. G., 1988, "Fundamentals of Oil Well Jet Pumping," Journal of SPE Production Engineering, Vol. 3, No. 1, pp. 9-14. https://doi.org/10.2118/15670-PA
- Hatzlavramidis, D. T., 1991, "Modelling and Design of Jet Pumps," SPE Production Engineering, Vol. 6, No. 4, pp. 413-419. https://doi.org/10.2118/19713-PA
- Corteville, J. C., Ferschneider, G., Hoffmann, F.C., Valentin, E.P., 1987, "Research on Jet Pumps for Single and Multiphase Pumping of Crudes," SPE Annual Technical Conference and Exhibition, paper no. SPE-16923, pp.437-448, Dallas, Texas.
- Neto, I. E. L., Porto, R. M., 2004, "Performance of Low-Cost Ejectors," Journal of Irrigation and Drainage Engineering, Vol. 130, No. 2, pp. 122-128. https://doi.org/10.1061/(ASCE)0733-9437(2004)130:2(122)
- Samad, A., Nizamuddin, M., 2013, "Flow Analyses Inside Jet Pumps Used for Oil Wells," International Journal of Fluid Machinery and Systems, Vol. 6, No. 1, pp. 1-10. https://doi.org/10.5293/IJFMS.2012.6.1.001
- Mikhail, S., Abdou, H. A. M., 2005, "Two-Phase Flow in Jet Pumps for Different Liquids," Journal of Fluids Engineering, Vol. 127, pp.1038-1042. https://doi.org/10.1115/1.1990203
- Mallela, R., Chatterjee, D., 2011, "Numerical Investigations of the Effect of Geometry on the Performance of Jet Pump," Journal of Mechanical Engineering Science, Vol. 225, pp. 1-12. https://doi.org/10.1243/09544062JMES2267
- Kumar, R. S., Kumaraswamy, S., Mani, A., 2007, "Experimental Investigations on a Two-Phase Jet Pump Used in Desalination Systems," Desalination, Vol. 204, pp. 437-447. https://doi.org/10.1016/j.desal.2006.03.546
- Chamlong, P., Takayama, S., Aoki, K., Nakayama, Y., 2002, "Numerical Prediction on the Optimum Mixing Throat Length for Drive Nozzle Position of the Central Jet Pump," Proceedings of 10th International Symposium on Flow Visualization, F0328, pp.1-6, Kyoto, Japan.
- Goel, T., Haftka, R. T., Shyy, W., Queipo, N., 2007, "Ensemble of Surrogates," Structural and Multidisciplinary Optimization, Vol. 33, No. 3, pp. 199-216. https://doi.org/10.1007/s00158-006-0051-9
- Samad, A., Kim, K.-Y., Goel, T., Haftka, R. T., Shyy, W., 2008, "Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization," Journal of Propulsion and Power, Vol. 24, No. 2, pp. 302-310. https://doi.org/10.2514/1.28999
- Song, X.-G., Park, J.-H., Kim, S.-G., Park, Y.-C., 2013, "Performance Comparison and Erosion Prediction of Jet Pumps by Using a Numerical Method," Mathematical and Computer Modelling, Vol. 57, No. 1-2, pp. 245-253. https://doi.org/10.1016/j.mcm.2011.06.040
- Eves. J., Toropov, V. V., Thompson, H. M., Kapur, N., Fan, J., Copley, D., Mincher, A., 2012, "Design Optimization of Supersonic Jet Pumps Using High Fidelity Flow Analysis," Structural and Multidisciplinary Optimization, Vol. 45, No. 5, pp. 739-745. https://doi.org/10.1007/s00158-011-0726-8
- Queipo, N. V., Haftka, R. T., Shyy, W., Goel, T., Vaidyanathan, R., Tucker, P. K., 2005, "Surrogate-Based Analysis and Optimization," Progress in Aerospace Sciences, Vol. 41, pp. 1-28. https://doi.org/10.1016/j.paerosci.2005.02.001
- Bellary, S. A. I., Samad. A., 2014, "Improvement of Efficiency by Design Optimization of a Centrifugal Pump Impeller," ASME TURBO EXPO 2014: Turbine Technical Conference and Exposition, GT-2014, Dusseldorf, German.
- Moon, M. A., Husain, A., Kim. K.-Y., 2012, "Multi-Objective Optimization of a Rotating Cooling Channel with Staggered Pin Fins for Heat Transfer Augmentation," International Journal for Numerical Methods in Fluids, Vol. 68, pp. 922-938. https://doi.org/10.1002/fld.2590
- Viana, F. A. C., Simpson, T. W., Balabanov, V., Toropov, V., 2014, "Metamodeling in Multidisciplinary Design Optimization: How Far Have We Really Come?," AIAA Journal, Vol. 52, No. 4, pp. 670-690. https://doi.org/10.2514/1.J052375
- Goel, T., Thakur, S., Haftka, R. T., Shyy, W., Zhao, J., 2008, "Surrogate Model-Based Strategy for Cryogenic Cavitation Model Validation and Sensitivity Evaluation," International Journal for Numerical Methods in Fluids, Vol. 58, pp. 969-1007. https://doi.org/10.1002/fld.1779
- Zerpa, L. E., Queipo, N. V., Pintos, S., Salager, J. L., 2005, "An Optimization Methodology of Alkaline-Surfactant-Polymer Flooding Processes Using Field Scale Numerical Simulation and Multiple Surrogates," Journal of Petroleum Science and Engineering, Vol. 47, pp. 197-208. https://doi.org/10.1016/j.petrol.2005.03.002
- Husain, A., Lee, K.-D., Kim, K.-Y., 2011 "Enhanced Multi-Objective Optimization of a Dimpled Channel Through Evolutionary Algorithms and Multiple Surrogate Methods," International Journal for Numerical Methods in Fluids, Vol. 66, pp. 742-759. https://doi.org/10.1002/fld.2282
- Husain, A., Kim, K.-Y., 2010, "Enhanced Multi-Objective Optimization of a Microchannel Heat Sink through Evolutionary Algorithm Coupled with Surrogate Models," Applied Thermal Engineering, Vol. 30, pp. 1683-1691. https://doi.org/10.1016/j.applthermaleng.2010.03.027
- Zhang, J., Chowdhury, S., Zhang, J., Messac, A., Castillo, L., 2013, "Adaptive Hybrid Surrogate Modeling for Complex Systems," AIAA Journal, Vol. 51, No. 3, pp. 643-656. https://doi.org/10.2514/1.J052008
- Lee, Y., Choi, D.-H., 2014, "Pointwise Ensemble of Meta-Models using v nearest Points Cross-Validation," Structural and Multidisciplinary Optimization, Vol. 50, No. 3, pp. 383-394. https://doi.org/10.1007/s00158-014-1067-1
- Yin, H., Wen, G., Fang, H., Qing, Q., Kong, X., Xiao, J., Liu, Z., 2014, "Multiobjective Crashworthiness Optimization Design of Functionally Graded Foam-Filled Tapered Tube Based on Dynamic Ensemble Metamodel," Materials and Design, Vol. 55, pp. 747-757. https://doi.org/10.1016/j.matdes.2013.10.054
- Krishnamurthy, P., 1975, "Design, Fabrication and Testing of Multiple Nozzle Jet Pump," M.Tech Report, Hydro-Turbomachines Laboratory, Department of Mechanical Engineering, IIT Madras.
- ANSYS., 2010, "ANSYS-CFX v13.0 manual," ANSYS Inc.
- Raw, M., 1996, "Robustness of Coupled Algebraic Multigrid for the Navier-Stokes Equations," AIAA 34th Aerospace Sciences Meeting and Exhibit, AIAA 96-0297, Reno, USA.
- Launder, B. E., and Spalding, D. B., 2001, "Lectures in Mathematical Models of Turbulence," Academic Press Inc, London, England.
- Deb, K., 2001, "Multi-Objective Optimization using Evolutionary Algorithms," 1st ed. John Wiley and Sons, New York.
- MATLAB., 2004, "MATLAB The Language of Technical Computing," The MathWorks Inc.
- Lophaven, S. N., Nielsen, H. B., Sondergaard, J., 2002, "A MATLAB Kriging Toolbox," Technical Report IMM-TR2002-12, Technical University of Denmark, Denmark.