References
- Han, J. C., 1988, "Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators," ASME Journal of Heat Transfer, Vol. 110, pp. 321-328. https://doi.org/10.1115/1.3250487
- Chandra, P. R., Alexander, C. R. and Han, J. C., 2003, "Heat Transfer and Friction Behavior in Rectangular Channels with Varying Number of Ribbed Walls," International Journal of Heat and Mass Transfer, Vol. 46, pp. 481-495. https://doi.org/10.1016/S0017-9310(02)00297-1
- Islam, M. S., Haga, K., Kaminaga, M., Hino, R. and Monde, M., 2002, "Experimental Analysis of Turbulent Flow Structure in a Fully Developed Rib-Roughened Rectangular Channel with PIV," Experiments in Fluids, Vol. 33, pp. 296-306. https://doi.org/10.1007/s00348-002-0432-9
-
Murata, A. and Mochizuki, S., 2004, "Effect of Rib Orientation and Channel Rotation on Turbulent Heat Transfer in a Two-Pass Square Channel with Sharp
$180^{\circ}$ Turns Investigated by Using Large Eddy Simulation," International Journal of Heat and Mass Transfer, Vol. 47, pp. 2599-2618. https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.016 - Wright, L. M., Fu,W. L. and Han, J. C., 2005, "Influence of Entrance Geometry on Heat Transfer in Rotating Rectangular Cooling Channels (AR=4:1) with Angled Ribs," Journal of Heat Transfer, Vol. 127, pp. 378-387. https://doi.org/10.1115/1.1860564
- Liu, Y. H., Huh, M., Han, J. C. and Chopra, S., 2008, "Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) under High Rotation Numbers," Journal of Heat Transfer, Vol. 130, 081701(1-9). https://doi.org/10.1115/1.2909615
- Metzger, D. E. and Vedula, R. P., 1987, "Heat Transfer in Triangular Channels with Angled Roughness Ribs on Two Walls," Experimental Heat Transfer, Vol. 1, pp. 31-44. https://doi.org/10.1080/08916158708946329
- Dutta, S., Han, J. C. and Lee, C. P., 1995, "Experimental Heat Transfer in a Rotating Triangular Duct: Effect of Model Orientation," ASME Journal of Heat Transfer, Vol. 117, pp. 1058-1061. https://doi.org/10.1115/1.2836282
- Liu, Y. H., Huh, M., Rhee, D. H., Han, J. C. and Moon, H. K., 2008, "Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels with Angled Ribs under High Rotation Numbers," Proceedings of ASME Turbo Expo 2008, GT2008-50334.
- Kim, K. Y. and Moon, M. A., 2009, "Optimization of a Stepped Circular Pin-Fin Array to Enhance Heat Transfer Performance," Heat and Mass Transfer, Vol. 46, pp. 63-74. https://doi.org/10.1007/s00231-009-0544-3
- Moon, M. A., Park, M. J. and Kim, K. Y., 2013, "Shaped Optimization of Staggered Ribs in a Rotating Equilateral Triangular Cooling Channel," Heat and Mass Transfer, Vol. 50, pp. 533-544.
- Lee, K. D. and Kim, K. Y., 2012, "Objective Function Proposed for Optimization of Convective Heat Transfer Devices," International Journal of Heat and Mass Transfer, Vol. 55, pp. 2792-2799. https://doi.org/10.1016/j.ijheatmasstransfer.2012.02.003
- Prasad, R. C. and Shen, J., 1993, "Performance Evaluation of Convective Heat Transfer Enhancement Devices Using Exergy Analysis," International Journal of Heat and Mass Transfer, Vol. 36, pp. 4193-4197. https://doi.org/10.1016/0017-9310(93)90081-G
- Cornelissen, R. L. and Hirs, G. G., 1997, "Exergetic Optimisation of a Heat Exchanger," Energy Conservation and Management, Vol. 38, pp. 1567-1576. https://doi.org/10.1016/S0196-8904(96)00218-X
- Samad, A. and Kim, K. Y., 2009, "Surrogate Based Optimization Techniques for Aerodynamic Design of Turbomachinery," International Journal of Fluid Machinery Systems, Vol. 2, pp. 179-188. https://doi.org/10.5293/IJFMS.2009.2.2.179
- Martin, J. D. and Simpson, T. W., 1989, "Use of Kriging Models to Approximate Deterministic Computer Models," AIAA Journal, Vol. 4, pp. 853-863.
- MP. Software Package, 2004, Ver. 5.1 SAS Inst. Inc., Cary, NC.
- ANSYS CFX-11.0, 2006, ANSYS Inc.
- Menter, F. R., 1994, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, pp. 1598-1605. https://doi.org/10.2514/3.12149
- Launder, B. E. and Spalding, D. B., 1974, "The Numerical Computation of Turbulent Flows," Computer Methods in Applied Mechanics and Engineering, Vol. 3, pp. 269-289. https://doi.org/10.1016/0045-7825(74)90029-2
- Wilcox, D. C., 1998, "Reassessment of the Scale-Determining Equation for Advanced Turbulence Models," AIAA Journal, Vol. 26, pp. 1299-1310.
- Bardina, J. E., Huang, P. G. and Coakley, T. J., 1997, "Turbulence Modelling Validation, Testing, and Development," NASA Technical Memorandum, 110446.
- Gee, D. L. and Webb, R. L., 1980, "Forced Convection Heat Transfer in Helically Rib-Roughened Tubes," International Journal of Heat and Mass Transfer, Vol. 23, pp. 1127-1135. https://doi.org/10.1016/0017-9310(80)90177-5
- Wagner, J. H., Johnson, B. V. and Hajek, T. J., 1991, "Heat Transfer in Rotating Passage with Smooth Walls and Radial Outward Flow," ASME Journal of Turbomachinery, Vol. 113, pp. 42-51. https://doi.org/10.1115/1.2927736
Cited by
- Performance Analysis of Double-Layer Microchannel Heat Sinks under Non-Uniform Heating Conditions with Random Hotspots vol.8, pp.2, 2017, https://doi.org/10.3390/mi8020054
- Effects of Rib Shapes on the Entropy Generation in a Ribbed Duct vol.32, pp.3, 2018, https://doi.org/10.2514/1.T5298