DOI QR코드

DOI QR Code

군용 피복류의 투습도 시험방법 표준화 연구

A Study on Standardization of Test Method for Water Vapour Permeability of Textiles Fabrics

  • 이민희 (국방기술품질원 품질경영본부) ;
  • 홍성돈 (국방기술품질원 품질경영본부) ;
  • 정일한 (울산과학대학교 산업경영과)
  • Lee, Min-Hee (Quality Management Bureau, Defense Agency for Technology and Quality) ;
  • Hong, Seong-Don (Quality Management Bureau, Defense Agency for Technology and Quality) ;
  • Chung, Il-Han (Department of Industrial Management, Ulsan College)
  • 투고 : 2016.07.11
  • 심사 : 2016.10.07
  • 발행 : 2016.10.31

초록

군수품은 방한복을 중심으로 투습방수성 소재 적용이 확대되고 있다. 특히 혹한기에는 장병의 생존성 확보를 위해 피복의 투습방수 기능이 더욱 중요한데, 체온의 손실을 예방하기 위해 땀은 외부로 빨리 발산하고 외부의 수분은 인체로 침투되지 않도록 해야 하기 때문이다. 한편, 한국군은 투습방수 소재의 성능을 내수도와 투습도로 평가하고 있다. 투습도는 규정된 온도 및 습도 하에서 직물을 통과하는 수증기의 증발 양을 측정하는 것으로, 이 중 아세트산포타슘을 이용한 방법(KS K 0594)이 주로 적용되고 있다. 그러나 이 방법은 시약의 준비 절차가 간략히 제시되어 공인시험기관별로 시험에 대한 준비과정 등이 상이하게 적용되고 있으며 이로 인해 결과의 편차가 크게 발생되고 있다. 따라서 본 연구에서는 공인시험기관별로 아세트산포타슘을 이용한 투습도 시험의 절차를 비교하고, 결과에 영향을 미치는 인자를 분석하여 투습도의 차이를 없애기 위한 개선안을 도출한다. 개선안에 대해 공인시험기관별 투습도에 대한 결과의 차이를 분석하기 위해 유의수준(0.05)을 바탕으로 일원배치법으로 분석한 결과 투습도의 편차가 감소한 것을 확인하였다.

Military textiles with breathable waterproof materials are expanding as form of winter clothes. Waterproof moisture-permeable clothes are very important for soldiers to survive in cold weather operations because they prevent loss of body heat from the penetration of water into the human body. Korea military uses the water resistance and moisture permeability to test the performance of waterproof moisture-permeable materials. Moisture permeability is measured according to the amount of evaporated water vapor passing through a fabric under specified temperature and humidity by using acetic acid potassium presented in KS K 0594. However, the test procedure for measuring the moisture permeability in the standard is presented only briefly and the preparation procedures for the test in accredited testing institutions are applied differently, leading to significant deviation of the results. This paper compares the procedures of testing institutions and examines the factors that affect moisture permeability. Finally, we propose a procedure to reduce the deviation of results and apply the proposed procedure in testing institutions. Our analysis results with one-way ANOVA under significant level (0.05) confirm that the deviation of results is reduced.

키워드

참고문헌

  1. G. Gu et al., Fiber processing functions the Second edition, pp. 174-178, Gyomunsa, 2012.
  2. S. H. Moon, "The development trend of outdoor breathable textiles", Fiber Technology and Industry, vol. 18, no. 2, pp. 120-126, 2014.
  3. I. C. Kim, H. B. Kang, S. D. Hong, M. H. Lee, D. W. Shin, "A study on improvement of the low temperature flex resistance test method about high waterproof materials", pp. 1-2, Defense Agency for Technology and Quality, 2015.
  4. S. D. Hong, Y. G. Kim, "The report on the Latest Development Trend and Evaluation Technic of Multi-fuctional Smart Textile", pp. 4-29 , Defense Agency for Technology and Quality, 2014.
  5. KS K ISO 811 Textile fabrics-Determination of resistance to water penetration-Hydrostatic pressure test, Korean Agency for Technology and Standards, 2009.
  6. KS K 0592 The method for water resistance of coated cloth : High range, hydrostatic pressure method, Korean Agency for Technology and Standards, 2011.
  7. KS K 0594 Test method for water vapour permeability of textiles, Korean Agency for Technology and Standards, 2013.
  8. D. G. Park, "The new design of experiment", pp. 13-51, Gijeonyeongusa, 1999.
  9. J. T. Park et al., The statistical method using Excel, pp. 15-50, Gyousa, 2003.
  10. KS M 8318 Potassium acetate, Korean Agency for Technology and Standards, 2013.
  11. S. D. Hong. J. L. Noh, "The Report about PU coating Technology and Quality Properties of Textiles", pp. 28-40. Defense Agency for Technology and Quality, 2012.