Abstract
This study aims to identify the core technology for the automatic impact of the auto-sensing breaker that is one of the construction machinery which do not have a notable development success case yet in Korea. The study has been carried out as follows. Firstly, an analysis model was developed after determining the interconnection of pressure receiving area, opening area and port. And then, a simulation of situation that hard rock and soft rock are mixed was carried out to verify if it is possible to switch between long impact mode and short impact mode continuously. Lastly, the dynamic behavior of automatic control valve induced by the change of impact mode was analyzed based on the analysis result to decipher the core principle of automatic impact control.
본 연구는 국내에서는 현재 개발 성공사례가 없는 건설 장비 중 하나인 지능형 브레이커의 자동타격조절 핵심기술을 파악하는 것을 목적으로 하고 있다. 연구진행은 다음과 같은 절차로 진행된다. 우선 수압면적과 개도면적, 포트의 연결 관계를 파악하여 해석모델을 개발한다. 그리고 해석모델에 경암과 연암을 오가는 상황을 모사하여 연속적으로 장타모드와 단타모드의 가변이 가능한지 검증한다. 마지막으로 해석결과로부터 타격모드가 가변될 때 발생하는 자동제어밸브의 동적거동을 분석하여, 자동타격조절의 핵심원리를 파악한다.