Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Low-temperature Sintering Behavior of TiO2 Activated with CuO

  • Paek, Yeong-Kyeun (The Center of Biomedical Materials and Biotechnology, Department of Materials Science and Engineering, Andong National University) ;
  • Shin, Chang-Keun (Youngpoong Heat Treatment Company) ;
  • Oh, Kyung-Sik (The Center of Biomedical Materials and Biotechnology, Department of Materials Science and Engineering, Andong National University) ;
  • Chung, Tai-Joo (The Center of Biomedical Materials and Biotechnology, Department of Materials Science and Engineering, Andong National University) ;
  • Cho, Hyoung Jin (NanoFab and BioMEMS Lab, Department of Mechanical and Aerospace Engineering, University of Central Florida)
  • Received : 2016.09.11
  • Accepted : 2016.10.24
  • Published : 2016.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In $TiO_2$-CuO systems, low-temperature sinterability was investigated by a conventional sintering method. Sintering temperatures were set at under $950^{\circ}C$, at which the volume diffusion is inactive. The temperatures are less than the melting point of Ag ($961^{\circ}C$), which is often used as an internal conductor in low-temperature co-fired ceramic technology. To optimize the amount of CuO dopant, various dopant contents were added. The optimum level for enhanced densification was 2 wt% CuO. Excess dopants were segregated to the grain boundaries. The segregated dopants supplied a high diffusion path, by which grain boundary diffusion improved. At lower temperatures in the solid state region, grain boundary diffusion was the principal mass transport mechanism for densification. The enhanced grain boundary diffusion, therefore, improved densification. In this regard, the results of this study prove that the sintering mechanism was the same as that of activated sintering.

Keywords

References

  1. C. T. Dervos, J. Novacovich, P. Vassilion, and P. Skapidas, "Permittivity properties of thermally treated $TiO_2$," Mater. Lett., 58 [9] 1502-7 (2004). https://doi.org/10.1016/j.matlet.2003.10.012
  2. C. K. Shin, Y. K. Paek, and H. J. Lee, "Effect of CuO on the Sintering Behavior and Dielectric Characteristics of Titanium Dioxide," Int. J. Appl. Ceram. Technol., 3 [6] 463-69 (2006). https://doi.org/10.1111/j.1744-7402.2006.02106.x
  3. S. Ma, P. R. Cantwell, T. J. Pennycook, N. Zhou, M. P. Oxley, D. N. Leonard, S. J. Pennycook, J. Luo, and M. P. Harmer, "Grain Boundary Complexion Transitions in $WO_3$- and CuO-doped $TiO_2$ Bicrystals," Acta Mater., 61 [5] 1691-704 (2006). https://doi.org/10.1016/j.actamat.2012.11.044
  4. R. M. German, Sintering Theory and Practice; pp. 209-13, Wiley Interscience Publication, 1996.
  5. I. Amato, "On the Mechanism of Activated Sintering of Tungsten Powders," Mater. Sci. and Eng., 10 15-21 (1972). https://doi.org/10.1016/0025-5416(72)90061-4
  6. P. E. Zovas, R. M. German, K. S. Hwang, and C. J. Li, "Activated and Liquid-phase Sintering-progress and Problems," J. Metals, 35 [1] 28-33 (1983).
  7. J, Luo, H. Wang, and Y. M. Chiang, "Origin of Solid-state Activated Sintering in $Bi_2O_3$-doped ZnO," J. Am. Ceram. Soc., 82 [4] 916-20 (1999). https://doi.org/10.1111/j.1151-2916.1999.tb01853.x
  8. J. C. Wurst and J. A. Nelson, "Lineal Intercept Technique for Measuring Grain Size in Two-phase Polycrystalline Ceramic," J. Am. Ceram. Soc., 55 [2] 109 (1972). https://doi.org/10.1111/j.1151-2916.1972.tb11224.x
  9. R. N. Blumenthal and D. H. Whitmore, "Thermodynamic Study of Phase Equilibria in the Titanium-Oxygen System within the $TiO_{1.95}-TiO_2$ Region," J. Electrochem. Soc., 110 92-3 (1963). https://doi.org/10.1149/1.2425682
  10. D. W. Kim, B. Park, J. H. Chung, and K. S. Hong, "Mixture Behavior and Microwave Dielectric Properties in the Low-fired $TiO_2$-CuO System," Jpn. J. Appl. Phys., 39 2696-700 (2000). https://doi.org/10.1143/JJAP.39.2696
  11. J. Li, R. Fu, Y. Xu. Z. Fu, and H. Su, "The Microstructure and Dielectric Properties of Titanium Oxide doped with Nano CuO," J. Adv. Dielectr., 4 [3] 1450025-1-7 (2014). https://doi.org/10.1142/S2010135X14500258
  12. F. H. Lu, F. X. Fang, and Y. S. Chen, "Eutectic Reaction between Copper Oxide and Titanium Dioxide," J. Eur. Ceram. Soc., 21 [8] 1093-99 (2001). https://doi.org/10.1016/S0955-2219(00)00298-3
  13. C.-K. Shin, The Sintering Behaviors and Microwave Dielectric Characteristics of Titanium Dioxide with an Additive (in Korean), p.36, in MS Thesis, Andong National University, Kyungbuk, South Korea, 2006.
  14. F. C. Gennari and D. M. Pasquevich, "Kinetics of the Anatase-Rutile Transformation in $TiO_2$ in the Presence of $Fe_2O_3$," J. Mat. Sci., 33 [6] 1571-78 (1998). https://doi.org/10.1023/A:1017515804370
  15. D. W. Kim, T. G. Kim, and K. S. Hong, "Low-Firing of CuO-Doped Anatase," Mater. Res. Bull., 34 [5] 771-81 (1999). https://doi.org/10.1016/S0025-5408(99)00071-9
  16. M. A. de la Rubia, J. J. Reinosa, P. Leret, J. J. Romero, J. de Frutos, and J. F. Fernandez, "Experimental Determination of the Eutectic Temperature in Air of the CuO-$TiO_2$ Pseudobinary System," J. Eur. Ceram. Soc., 32 71-6 (2012).
  17. J.-K. Park, S.-J. L. Kang, K. Y. Eun, and D. N. Yoon, "Microstructural Change during Liquid Phase Sintering of W-Ni-Fe Alloy," Metall. Trans. A, 20A 837-45 (1989).
  18. J. L. Johnson, "Activated Liquid Phase Sintering of W-Cu and Mo-Cu," Int. J. Refract. Met. Hard Mater., 53 80-6 (2015). https://doi.org/10.1016/j.ijrmhm.2015.04.030
  19. M. F. Yan, "Microstructural Control in the Processing of Electronic Ceramics," Mater. Sci. Eng., 48, 53-72 (1981). https://doi.org/10.1016/0025-5416(81)90066-5
  20. R. Li, Q. Tang, S. Yin, and T. Sato, "Nonstoichiometrically Activated Sintering for $Ca_{1-x}Sr_xTiO_3$ Compound by Creating Point Defects," Chem. Mater., 18 273-78 (2006). https://doi.org/10.1021/cm0509274
  21. V. K. Gupta, D. H. Yoon, H. M. Meyer, and J. Luo, "Thin Intergranular Films and Solid-state Activated Sintering in Nickel-doped Tungsten," Acta Mater., 55 3131-42 (2007). https://doi.org/10.1016/j.actamat.2007.01.017

Cited by

  1. Low-temperature sintering behaviors in a titanium oxide-copper oxide system through two-step heat treatment vol.58, pp.2, 2016, https://doi.org/10.1007/s43207-020-00092-3