Abstract
There are various test methods for evaluating the reflective cracking resistance of asphalt concrete pavement. Repeated direct tensile test is cheap and simple compared to the other traditional experimental methods. Determination of failure criteria is needed to apply a repeated direct tensile test. Various methods were used to determine the number of failure of repeated direct tensile test. The number of failure was defined as the time to reach 10% of the initial load, this method can be satisfied with specified tolerance of 10%. When the thickness of specimen is increased to 50 mm from 30 mm, the failure number is increased by 13.6 times. Thus, this result shows that the thickness of pavement is a big influence on the reflective cracking resistance. Reflective cracking resistance of asphalt concrete is decreased according to the increase in opening displacement. The repeated direct tensile test can be used as a reflective cracking resistance factor in pavement design, because it can evaluate the reflective cracking resistance according to the pavement thickness, opening displacement, material properties etc.
아스팔트 콘크리트 포장의 반사균열 저항성을 평가하기 위해 다양한 방법이 적용되고 있다. 반복직접인장시험은 기존실험에 비해 저렴하고 간편하게 아스팔트 콘크리트 포장의 반사균열 저항성을 평가할 수 있는 장점이 있다. 국내에 반복직접인장시험을 도입하기 위해서는 파괴기준의 결정이 필요하다. 반복직접인장시험의 파괴횟수를 결정하기 위해 다양한 방법을 검토한 결과 초기하중의 10%일 때를 파괴시점으로 산정할 경우 10% 이내의 반복횟수 편차를 나타내었다. 아스팔트 콘크리트의 두께가 30 mm에서 50 mm로 증가할 경우 파괴횟수는 13.6배 증가하여 포장두께가 반사균열 저항성에 큰 영향을 미치는 것을 알 수 있었다. 또한 재하변형의 크기가 클수록 반사균열의 진전속도가 증가하는 것으로 나타났다. 반복직접인장시험은 포장 두께, 변형크기, 재료적 특성에 따라 반사균열저항성을 정량적으로 평가할 수 있기 때문에 포장설계시 반사균열 저항성 평가 방법으로 적용 가능한 것으로 나타났다.