KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Traffic Volume and Vehicle Speed Calculation Method for type of Sensor Failure of Automatic Vehicle Classification Equipment

AVC 장비의 센서고장 상황에 따른 교통량·통행 속도 산출 방법

  • Kim, Min-heon (Korea Institute of Civil Engineering and Building Technology) ;
  • Oh, Ju-sam (Korea Institute of Civil Engineering and Building Technology)
  • 김민현 (한국건설기술연구원 ICT 융합연구소) ;
  • 오주삼 (한국건설기술연구원 ICT 융합연구소)
  • Received : 2016.06.29
  • Accepted : 2016.09.05
  • Published : 2016.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The current operation method for the AVC (Automatic Vehicle Classification) equipment does not generate vehicle speed, traffic volume and vehicle type information when part of the sensors has failed. Inefficiency of current methods would not use the collected data from the normal sensor. In this study was conducted research on the calculating method at the traffic volume and vehicle speed in the sensor failure AVC equipment. The failure situation of the sensor was classified into 4 types. Calculating the traffic volume and vehicle speed information for each type, and accuracy of these informations were analyzed. Analysis results, traffic volume was possible to calculate a highly accurate value (accuracy: 100%, 98%, 97%). In the case of speed, the accuracy of the calculated speed value reaches a level that can be accepted sufficiently (RMSE value is less than 16.8). So, using the methodology proposed in this study are expected to be able to increase the operational efficiency of the AVC equipment.

현재 AVC 장비의 운영방법은 하나의 센서가 고장 나면 해당 차로의 교통량 속도 차량 종류에 대한 모든 정보의 생성을 중단하고 있다. 현재의 운영방법은 정상 센서에서 수집한 자료들을 활용하지 않는다는 비효율이 존재한다. 본 연구는 이런 비효율을 개선하기 위하여 일부 센서가 고장 난 AVC (Automatic Vehicle Classification)장비에서 교통량과 속도의 산출 방법에 대하여 연구를 진행하였다. 센서의 고장유형을 총 4가지로 분류하였으며, 각 고장유형별로 교통량과 속도를 산출하고 이에 대한 정확도분석을 수행하였다. 그 결과 교통량은 정확도가 매우 높은 값(정확도: 100%, 98%, 97%)으로 산출이 가능하였으며, 속도의 경우 충분히 받아들일 만한 수준의 속도 값(RMSE 값 16.9 이하)이 산출되는 것을 확인하였다. 따라서 본 연구에서 제시한 방법론들을 사용하면 AVC 장비의 운영 효율을 증가 시킬 수 있을 것으로 기대된다.

Keywords

References

  1. Choi, D. H. (2000). "The development of the traffic monitorin system applied by the artificial intelligence." Ministry of Land and Infrastructure and Transport, Korea Institute of Civil Eengineering and Building Technology.
  2. Gang, J. G. (2002). "Development of speed measurement accuracy using double loop detectors." Korean Society of Transportation, Journal of Korean Society of Transportation, Vol. 20, No. 5, pp. 163-174.
  3. Kim, J. H. (2001). "A study of individual vehicle speed estimation using inductance wave forms of single loop sensor." Hanyang University, Master Degree Thesis.
  4. Kim, M. B. Hyun, C. S., Yoo, S. J. and Hong, Y. S. (2006). "A comparison between the tape switch sensor and the video images frame analysis method on the speed measurement of vehicle." The Institute of Electronics Engineers of Korea, Telecommunications, Vol. 43, No. 9, pp. 120-127.
  5. Min, J.-H., Gang, J.-G., Ju, I.-H. and Choi, D.-H. (2003). "Development of traffic data acquisition system with loop sensor and piezoelectric sensors." The Korea Institute of Intelligent Transport Systems, The Conference of The Korea Institute of Intelligent Transport Systems, No. 1, pp. 56-61.
  6. Ministry of Land, Infrastructure and Transport (2015). 2014 Annual traffic volume report.