Geomechanics and Engineering

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A modified shear strength reduction finite element method for soil slope under wetting-drying cycles

  • Tu, Yiliang (College of Civil Engineering, Chongqing University) ;
  • Zhong, Zuliang (College of Civil Engineering, Chongqing University) ;
  • Luo, Weikun (College of Civil Engineering, Chongqing University) ;
  • Liu, Xinrong (College of Civil Engineering, Chongqing University) ;
  • Wang, Sui (College of Civil Engineering, Chongqing University)
  • Received : 2014.12.13
  • Accepted : 2016.07.09
  • Published : 2016.12.12
⟨ Previous Next ⟩

Abstract

The shear strength reduction finite element method (SSRFEM) is a powerful tool for slope stability analysis. The factor of safety (FOS) of the slope can be easily calculated only through reducing effective cohesion (c′) and tangent of effective friction angle ($tan{\varphi}^{\prime}$) in equal proportion. However, this method may not be applicable to soil slope under wetting-drying cycles (WDCs), because the influence of WDCs on c′ and $tan{\varphi}^{\prime}$ may be different. To research the method of estimating FOS of soil slopes under WDCs, this paper presents an experimental study firstly to investigate the effects of WDCs on the parameters of shear strength and stiffness. Twelve silty clay samples were subjected to different number of WDCs and then tested with triaxial test equipment. The test results show that WDCs have a degradation effect on shear strength (${\sigma}_1-{\sigma}_3)_f$, secant modulus of elasticity ($E_s$) and c′ while little influence on ${\varphi}^{\prime}$. Hence, conventional SSRFEM which reduces c′ and $tan{\varphi}^{\prime}$ in equal proportion cannot be adopted to compute the FOS of slope under conditions of WDCs. The SSRFEM should be modified. In detail, c′ is merely reduced among shear strength parameters, and elasticity modulus is reduced correspondingly. Besides, a new approach based on sudden substantial changes in the displacement of marked nodes is proposed to identify the slope failure in SSRFEM. Finally, the modified SSRFEM is applied to compute the FOS of a slope example.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Central Universities of China

References

  1. Ahmadi, H., Rahimi, H. and Rostami, M.E. (2012), "Control of swelling of soil under canal lining by wetting and drying cycles", Irrig. Drain., 61(4), 527-532. https://doi.org/10.1002/ird.1666
  2. Akcanca, F. and Aytekin, M. (2012), "Effect of wetting-drying cycles on swelling behavior of lime stabilized sand-bentonite mixtures", Environ. Earth Sci., 66(1), 67-74. https://doi.org/10.1007/s12665-011-1207-5
  3. Al-Mukhtar, M., Khattab, S. and Alcover, J.F. (2012), "Microstructure and geotechnical properties of lime-treated expansive clayey soil", Eng. Geol., 139-140, 17-27. https://doi.org/10.1016/j.enggeo.2012.04.004
  4. Aldaood, A., Bouasker, M. and Al-Mukhtar, M. (2014), "Impact of wetting-drying cycles on the microstructure and mechanical properties of lime-stabilized gypseous soils", Eng. Geol., 174, 11-21. https://doi.org/10.1016/j.enggeo.2014.03.002
  5. Brooks, S.M., Crozier, M.J. and Glade, T.W. (2004), "Towards establishing climatic thresholds for slope instability: use of a physically-based combined soil hydrology-slope stability model", Pure Appl. Geophys., 161(4), 881-905. https://doi.org/10.1007/s00024-003-2477-y
  6. Chandler, R.J. (1972), "Lias clay: Weathering processes and their effect on shear strength", Geotechnique, 22(3), 403-431. https://doi.org/10.1680/geot.1972.22.3.403
  7. Chen, R. and Ng, C.W.W. (2013), "Impact of wetting-drying cycles on hydro-mechanical behavior of an unsaturated compacted clay", Appl. Clay Sci., 86, 38-46. https://doi.org/10.1016/j.clay.2013.09.018
  8. Clarke, D. and Smethurst, J.A. (2010), "Effects of climate change on cycles of wetting and drying in engineered clay slopes in England", Quarter. J. Eng. Geol. Hydrogeol., 43(4), 473-486. https://doi.org/10.1144/1470-9236/08-106
  9. Dawson, E.M., Roth, W.H. and Drescher, A. (1999), "Slope stability by strength reduction", Geotechnique, 49(6), 835-840. https://doi.org/10.1680/geot.1999.49.6.835
  10. Donald, I.B. and Giam, S.K. (1988), "Application of the nodal displacement method to slope stability analysis", Proceedings of the 5th Australia-New Zealand Conference on Geomechanics, Sydney, Australia, August.
  11. Estabragh, A.R., Moghadas, M. and Javadi, A.A. (2013), "Effect of different types of wetting fluids on the behavior of expansive soil during wetting and drying", Soils Found., 53(5), 617-627. https://doi.org/10.1016/j.sandf.2013.08.001
  12. Goh, S.G., Rahardjo, H. and Leong, E.C. (2014), "Shear strength of unsaturated soils under multiple drying-wetting cycles", J. Geotech. Geoenviron. Eng.-ASCE, 140(2), 06013001-06013005. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001032
  13. Goual, I., Goual, M.S. and Taibi, S. (2011), "Behaviour of unsaturated tuff-calcareous sand mixture on drying-wetting and triaxial paths", Geomech. Eng., Int. J., 3(4), 267-284. https://doi.org/10.12989/gae.2011.3.4.267
  14. Griffiths, D.V. and Lane, P.A. (1999), "Slope stability analysis by finite elements", Geotechnique, 49(3), 387-403. https://doi.org/10.1680/geot.1999.49.3.387
  15. Gulla, G., Mandaglio, M.C. and Moraci, N. (2006), "Effect of weathering on the compressibility and shear strength of a natural clay", Can. Geotech. J., 43(6), 618-625. https://doi.org/10.1139/t06-028
  16. Guney, Y., Sari, D., Cetin, M. and Tuncan, M. (2007), "Impact of cyclic wetting-drying on swelling behavior of lime-stabilized soil", Build. Environ., 42(2), 681-688. https://doi.org/10.1016/j.buildenv.2005.10.035
  17. Hughes, P.N., Glendinning, S. and Mendes, J. (2009), "Full-scale testing to assess climate effects on embankments", Proceedings of the Institution of Civil Engineers-Engineering Sustainability, 162(2), 67-79.
  18. Itasca Consulting Group, Inc. (2002), FLAC-Fast Lagrangian Analysis of Continua, Version 4.0 Users' Guide, Itasca, Consulting Group, Inc., Minneapolis, MN, USA.
  19. Kalkan, E. (2009), "Influence of silica fume on the desiccation cracks of compacted clayey soils", Appl. Clay Sci., 43(3-4), 296-302. https://doi.org/10.1016/j.clay.2008.09.002
  20. Kalkan, E. (2011), "Impact of wetting-drying cycles on swelling behavior of clayey soils modified by silica fume", Appl. Clay Sci., 54(4), 345-352.
  21. Kalkan, E. and Akbulut, S. (2004), "The positive effects of silica fume on the permeability, swelling pressure and compressive strength of natural clay liners", Eng. Geol., 73(1-2), 145-156. https://doi.org/10.1016/j.enggeo.2004.01.001
  22. Kampala, A., Horpibulsuk, S., Prongmanee, N. and Chinkulkijniwat, A. (2014), "Influence of wet-dry cycles on compressive strength of calcium carbide residue-fly ash stabilized clay", J. Mater. Civil Eng., 26(4), 633-643. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000853
  23. Kholodov, V.A. (2013), "The capacity of soil particles for spontaneous formation of macro aggregates after a wetting-drying cycle", Eurasian Soil Sci., 46(6), 660-667. https://doi.org/10.1134/S1064229313040078
  24. Kilsby, C., Glendinning, S. and Hughes, P.N. (2009), "Climate-change impacts on long-term performance of slopes", Proceedings of the Institution of Civil Engineers-Engineering Sustainability, 162(2), 59-66.
  25. Leroueil, S. (2001), "Natural slopes and cuts: movement and failure mechanisms", Geotechnique, 51(3), 197-243. https://doi.org/10.1680/geot.2001.51.3.197
  26. Malusis, M.A., Yeom, S. and Evans, J.C. (2011), "Hydraulic conductivity of model soil-bentonite backfills subjected to wet-dry cycling", Can. Geotech. J., 48(8), 1198-1211. https://doi.org/10.1139/t11-028
  27. Manzari, M.T. and Nour, M.A., (2000), "Significance of soil dilatancy in slope stability analysis", J. Geotech. Geoenviron. Eng., 123(1), 75-80.
  28. Matsui, T. and San, K.C. (1992), "Finite element slope stability analysis by shear strength reduction technique", Soils Found., 32(1), 59-70. https://doi.org/10.3208/sandf1972.32.59
  29. Mshana, N.S., Suzuki, A. and Kitazono, Y. (1993), "Effects of weathering on stability of natural slopes in north-central Kumamoto", Soils Found., 33(4), 74-87. https://doi.org/10.3208/sandf1972.33.4_74
  30. Nowamooz, H., Jahangir, E. and Masrouri, F. (2013), "Volume change behaviour of a swelling soil compacted at different initial states", Eng. Geol., 153, 25-34. https://doi.org/10.1016/j.enggeo.2012.11.010
  31. Rajiaram, G. and Erbach, D.C. (1999), "Effect of wetting and drying on soil physical properties", J. Terramech., 36(1), 39-49. https://doi.org/10.1016/S0022-4898(98)00030-5
  32. Ridley, A., McGinnity, B. and Vaughan, P. (2004), "Role of pore water pressures in embankment stability", Geotech. Eng., 157(4), 193-198. https://doi.org/10.1680/geng.2004.157.4.193
  33. Rouainia, M., Davies, O. and Brien, T.O. (2009), "Numerical modelling of climate effects on slope stability", Proceedings of the Institution of Civil Engineers-Engineering Sustainability, 162(2), 81-89.
  34. Smethurst, J.A., Clarke, D. and Powrie, W. (2006), "Seasonal changes in pore water pressure in a grass-covered cut slope in London Clay", Geotechnique, 56(8), 523-537. https://doi.org/10.1680/geot.2006.56.8.523
  35. Suksun, H., Runglawan, R. and Avirut, C. (2010), "Analysis of strength development in cement-stabilized silty clay from microstructural considerations", Construct. Build. Mater., 24(10), 2011-2021. https://doi.org/10.1016/j.conbuildmat.2010.03.011
  36. Toll, D.G., Mendes, J. and Augarde, C.E. (2008), "Effects of climate change on slopes for transportation infrastructure", Proceedings of the 1st International Conference on Transportation Geotechnics, Nottingham, England, August.
  37. Uchaipichat, A. (2010), "Experimental investigation on loading collapse curve of unsaturated soils under wetting and drying processes", Geomech. Eng., Int. J., 2(3), 203-211. https://doi.org/10.12989/gae.2010.2.3.203
  38. Ugai, K. and Leshchinsky, D. (1995), "Three-dimensional limit equilibrium and finite element analysis: a comparison of results", Soils Found., 35(4), 1-7.
  39. Wang, J.B., Liu, X.R. and Liu, X.J. (2014), "Creep properties and damage model for salt rock under low-frequency cyclic loading", Geomech. Eng., Int. J., 7(5), 569-587. https://doi.org/10.12989/gae.2014.7.5.569
  40. Zhang, P.W. and Chen, Z.Y. (2006), "Influences of soil elastic modulus and Poisson's ratio on slope stability", Rock Soil Mech., 27(2), 299-303. [In Chinese]
  41. Zheng, H., Tham, L.G. and Liu, D. (2006), "On two definitions of the factor of safety commonly used in the finite element slope stability analysis", Comput. Geotech., 33(3), 188-195. https://doi.org/10.1016/j.compgeo.2006.03.007
  42. Zienkiewicz, O.C., Humpheson, C. and Lewis, R.W. (1975), "Associated and non-associated visco-plasticity and plasticity in soil mechanics", Geotechnique, 25(4), 671-689. https://doi.org/10.1680/geot.1975.25.4.671

Cited by

  1. Prediction models of the shear modulus of normal or frozen soil-rock mixtures vol.15, pp.2, 2016, https://doi.org/10.12989/gae.2018.15.2.783
  2. Numerical modeling on the stability of slope with foundation during rainfall vol.17, pp.1, 2016, https://doi.org/10.12989/gae.2019.17.1.109
  3. A new criterion for defining the failure of a fractured rock mass slope based on the strength reduction method vol.11, pp.1, 2016, https://doi.org/10.1080/19475705.2020.1814428
  4. A set of failure variables for analyzing stability of slopes and tunnels vol.20, pp.3, 2016, https://doi.org/10.12989/gae.2020.20.3.175
  5. Strain-based stability analysis of locally loaded slopes under variable conditions vol.23, pp.3, 2016, https://doi.org/10.12989/gae.2020.23.3.289
  6. Slope hybrid reliability analysis considering the uncertainty of probability-interval using three-parameter Weibull distribution vol.105, pp.1, 2016, https://doi.org/10.1007/s11069-020-04323-y
  7. Explicit finite element analysis of slope stability by strength reduction vol.26, pp.2, 2016, https://doi.org/10.12989/gae.2021.26.2.133