DOI QR코드

DOI QR Code

Micro-seismic monitoring in mines based on cross wavelet transform

  • Huang, Linqi (School of Resources and Safety Engineering, Central South University) ;
  • Hao, Hong (Centre for Infrastructural Monitoring and Protection, School of Civil and Mechanical Engineering, Curtin University) ;
  • Li, Xibing (School of Resources and Safety Engineering, Central South University) ;
  • Li, Jun (Centre for Infrastructural Monitoring and Protection, School of Civil and Mechanical Engineering, Curtin University)
  • 투고 : 2016.04.01
  • 심사 : 2016.06.26
  • 발행 : 2016.12.25

초록

Time Delay of Arrival (TDOA) estimation methods based on correlation function analysis play an important role in the micro-seismic event monitoring. It makes full use of the similarity in the recorded signals that are from the same source. However, those methods are subjected to the noise effect, particularly when the global similarity of the signals is low. This paper proposes a new approach for micro-seismic monitoring based on cross wavelet transform. The cross wavelet transform is utilized to analyse the measured signals under micro-seismic events, and the cross wavelet power spectrum is used to measure the similarity of two signals in a multi-scale dimension and subsequently identify TDOA. The offset time instant associated with the maximum cross wavelet transform spectrum power is identified as TDOA, and then the location of micro-seismic event can be identified. Individual and statistical identification tests are performed with measurement data from an in-field mine. Experimental studies demonstrate that the proposed approach significantly improves the robustness and accuracy of micro-seismic source locating in mines compared to several existing methods, such as the cross-correlation, multi-correlation, STA/LTA and Kurtosis methods.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Aminzadeh, F., Maity, D., Tafti, T.A. and Brouwer, F. (2011), "Artificial neural network based autopicker for micro-earthquake data", 2011 SEG Annual Meeting, San Antonio, Texas, September.
  2. Boschetti, F., Dentith, M. and List, R. (1996), "A fractal-based algorithm for detecting first arrivals", Geophysics, 61(4), 1095-1102. https://doi.org/10.1190/1.1444030
  3. Carter, G.C. (1987), "Coherence and time delay estimation", Proc. IEEE, 75(2), 236-255. https://doi.org/10.1109/PROC.1987.13723
  4. Chalmers, D.R. (2013), "Explosions in mines-systematic failure", 23rd World Mining Congress 2013 Proceedings, Montreal, Canada, August.
  5. Correig, A.M. and Urquizu, M. (2002), "Some dynamical characteristics of microseism time-series", Geophys. J. Int., 149(3), 589-598. https://doi.org/10.1046/j.1365-246X.2002.01602.x
  6. Dong, L.J., Li, X.B. and Xie, G.N. (2014), "Nonlinear methodologies for identifying seismic event and nuclear explosion using random forest, support vector machine, and naive bayes classification", Abstract Appl. Anal., 2014(1), 1-8.
  7. Earle, P.S. and Shearer, P.M. (1994), "Characterization of global seismograms using an automatic-picking algorithm", Bull. Seismol. Soc. Am., 84(2), 366-376.
  8. Gomberg, J.S., Shedlock, K.M. and Roecker, S.W. (1990), "The effect of S-wave arrival times on the accuracy of hypocenter estimation", Bull. Seismol. Soc. Am., 80(6A), 1605-1628.
  9. Grinsted, A., Moore, J.C. and Jevrejeva, S. (2004), "Application of the cross wavelet transform and wavelet coherence to geophysical time series", Nonlin. Proc. Geophys., 11(5/6), 561-566. https://doi.org/10.5194/npg-11-561-2004
  10. Han, L., Wong, J. and Bancroft, J. (2010), "Time picking on noisy microseismograms", Proceedings of the GeoCanada 2010 Convention-Working with the Earth, Calgary, AB, Canada.
  11. He, X.L. and Zhao, L.Z. (2010), "Analysis of shear wave velocity based on multiple cross-correlation functions", Rock Soil Mech., 31(8), 2541-2545. (In Chinese)
  12. Huang, Y.A. and Benesty, J. (Eds.) (2007), Audio signal processing for next-generation multimedia communication systems, Springer Science & Business Media, 197-253.
  13. Jiang, F., Kuang, Y. and Astrom, K. (2013), "Time delay estimation for TDOA self-calibration using truncated nuclear norm regularization", IEEE International Conference on Acoustics, Speech and Signal Processing, Vancouver, BC, May.
  14. Jiao, L. and Moon, W.M. (2012). "Detection of seismic refraction signals using a variance fractal dimension technique", Geophysics, 65(1), 286-292. https://doi.org/10.1190/1.1444719
  15. Knapp, C.H. and Carter G.C. (1976), "The generalized correlation method for estimation of time delay", IEEE Trans. Acoust., Speech, Sign. Proc., 24(4), 320-327. https://doi.org/10.1109/TASSP.1976.1162830
  16. Kwon, O.Y. and Chan, J.Y. (1998), "Source location in plate by using wavelet transform of AE signals", 14th International AE Symposium & 5th AE World Meeting (Vol. 4), Hawaii, USA, August.
  17. Kwon, B., Park, Y. and Park, Y. (2010), "Analysis of the GCC-PHAT technique for multiple sources", 2010 International Conference on Control Automation and Systems, Gyeonggi-do, October.
  18. Li, J., Hao, H., Xia, Y. and Zhu, H.P. (2015a), "Damage assessment of shear connectors with vibration measurements and power spectral density transmissibility", Struct. Eng. Mech., 54(2), 257-289. https://doi.org/10.12989/sem.2015.54.2.257
  19. Li, J., Hao, H. and Lo, J.V. (2015b), "Structural damage identification with power spectral density transmissibility: numerical and experimental studies", Smart Struct. Syst., 15(1), 15-40. https://doi.org/10.12989/sss.2015.15.1.015
  20. Li, J. and Hao, H. (2016), "A review of recent research advances on structural health monitoring in Western Australia", Struct. Monit. Mainten., 3(1), 33-49. https://doi.org/10.12989/SMM.2016.3.1.033
  21. Law, S.S., Zhu, X.Q., Tian, Y.J., Li, X.Y. and Wu, S.Q. (2013), "Statistical damage classification method based on wavelet packet analysis", Struct. Eng. Mech., 46(4), 459-486. https://doi.org/10.12989/sem.2013.46.4.459
  22. Li, Z.M., Gou, X.M., Jin, W.D., Qin, N., Liu, J.B. and Luo, X. (2008), "Frequency feature of microseimic signals", Chinese J. Geophys. Eng., 30(6), 830-834. (In Chinese)
  23. Liu, W.D, Zhang, W. and Dou, L.M. (2009), "Research of the time difference computation in acoustic emission location", Comput. Eng. Sci., 31(4), 127-129. (In Chinese)
  24. Lu, C.P., Dou, L.M., Cao, A.Y. and Wu, X.R. (2008), "Research on microseismic activity rules in Sanhejian coal mine", J. Coal Sci. Eng. (China), 14(3), 373-377. https://doi.org/10.1007/s12404-008-0082-5
  25. McCormack, M., Zaucha, D. and Dushek, D. (1993), "First-break refraction event picking and seismic data trace editing using neural networks", Geophysics, 58(1), 67-78 https://doi.org/10.1190/1.1443352
  26. Munro, K.A. (2004), "Automatic event detection and picking P-wave arrivals", CREWES Research Report, 16(12), 1-10.
  27. Nistor, S. and Buda, A.S. (2015), "Ambiguity resolution in precise point positioning technique: a case study", J. Appl. Eng. Sci., 5(1), 53-60.
  28. Pavlis, G.L. (1986), "Appraising earthquake hypocenter location errors: a complete, practical approach for single-event locations", Bull. Seismol. Soc. Am., 76(6), 1699-1717.
  29. Saragiotis, C.D., Hadjileontiadis, L.J. and Panas, S.M. (2002), "PAI-S/K: a robust automatic seismic P phase arrival identification scheme", IEEE Trans. Geosci. Remote Sens., 40(6), 1395-1404. https://doi.org/10.1109/TGRS.2002.800438
  30. Sobolev, G.A., Lyubushin, A.A. and Zakrzhevskaya, N.A. (2005), "Synchronization of microseismic variations within a minute range of periods", Izvestiia Physics of the Solid Earth C/C Of Fizika Zemli-Rossiiskaia Akademiia Nauk, 41(8), 599-621.
  31. Saragiotis, C.D., Hadjileontiadis, L.J., Rekanos, I.T. and Panas, S.M. (2004), "Automatic P phase picking using maximum kurtosis and ${\kappa}$-statistics criteria", IEEE Geosci. Remote Sens. Lett., 1(3), 147-151. https://doi.org/10.1109/LGRS.2004.828915
  32. Waldhauser, F. and Ellsworth, W.L. (2000), "A double-difference earthquake location algorithm: method and application to the northern hayward fault, California", Bull. Seismol. Soc. Am., 90(6), 1353-1368. https://doi.org/10.1785/0120000006
  33. Wang, Q. and Chu, F. (2001), "Experimental determination of the rubbing location by means of acoustic emission and wavelet transform", J. Sound Vib., 248(1), 91-103. https://doi.org/10.1006/jsvi.2001.3676
  34. Wong, J., Han, L., Bancroft, J. and Stewart, R. (2009), "Automatic time-picking of first arrivals on noisy microseismic data", CSEG. 0 0.2 0.4 0.6 0.8 1.1.2, 1-4.
  35. Xing, H.Y., Liu, Z.Q. and Wan, M.X. (2002), "The generalized correlation algorithm for estimation of time delay based on wavelet transform", ACTA Acustica, 27(1), 88-93. (In Chinese)
  36. Yuksel, S.B. and Yarar, A. (2015), "Neuro-fuzzy and artificial neural networks modeling of uniform temperature effects of symmetric parabolic haunched beams", Struct. Eng. Mech., 56(5), 787-796. https://doi.org/10.12989/sem.2015.56.5.787
  37. Zhang, H.L., Zhu, G.M. and Wang, Y.H. (2013), "Automatic microseismic event detection and picking method", Geophys. Geochem. Explor., 37(2), 269-273. (In Chinese)
  38. Zhong, S., Xia, W., He, Z., Hu, J. and Li, J. (2014), "Time delay estimation in the presence of clock frequency error", 2014 IEEE International Conference on Acoustics, Speech and Signal Processing, Florence, Italy, May.
  39. Zhao, C. (2015), "Analytical solutions for crack initiation on floor-strata interface during mining", Geomech. Eng., 8(2), 237-255. https://doi.org/10.12989/gae.2015.8.2.237

피인용 문헌

  1. Source identification of microseismic events in underground mines with interferometric imaging and cross wavelet transform vol.71, 2018, https://doi.org/10.1016/j.tust.2017.08.024
  2. Noise robust bird call localisation using the generalised cross-correlation with phase transform in the wavelet domain vol.146, pp.6, 2016, https://doi.org/10.1121/1.5138593