DOI QR코드

DOI QR Code

Evaluation of the effect of smart façade systems in reducing dynamic response of structures subjected to seismic loads

  • Samali, Bijan (Institute for Infrastructure Engineering, Western Sydney University) ;
  • Abtahi, Pouya (Institute for Infrastructure Engineering, Western Sydney University)
  • 투고 : 2016.01.30
  • 심사 : 2016.08.15
  • 발행 : 2016.12.25

초록

To date the engineering community has seen facade systems as non-structural elements with high aesthetic value and a barrier between the outdoor and indoor environments. The role of facades in energy use in a building has also been recognized and the industry is also witnessing the emergence of many energy efficient facade systems. This paper will focus on using exterior skin of the double skin facade system as a dissipative movable element during earthquake excitation. The main aim of this study is to investigate the potential of the facade system to act as a damper system to reduce earthquake-induced vibration of the primary structure. Unlike traditional mass dampers, which are usually placed at the top level of structures, the movable/smart double skin facade systems are distributed throughout the entire height of building structures. The outer skin is moveable and can act as a multi tuned mass dampers (MTMDs) that move and dissipate energy during strong earthquake motions. In this paper, using a three dimensional 10-storey building structure as the example, it is shown that with optimal choice of materials for stiffness and damping of brackets connecting the two skins, a substantial portion of earthquake induced vibration energy can be dissipated which leads to avoiding expensive ductile seismic designs. It is shown that the engineering demand parameters (EDPs) for a low-rise building structures subjected to moderate to severe earthquakes can be substantially reduced by introduction of a smart designed double skin system.

키워드

과제정보

연구 과제 주관 기관 : Australian Research Council

참고문헌

  1. AAMA 501.4 (2009), Recommended Static Testing Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drift: Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System, American Architectural Manufacturers Association,USA.
  2. Aldemir, U. (2003), "Optimal control of structures with semiactive-tuned mass dampers", J. Sound Vib., 266(4), 847-874. https://doi.org/10.1016/S0022-460X(03)00191-3
  3. AS1170.4 (2007), Structural design actions Part 4: Earthquake actions in Australia, Australian/New Zealand Standard, Australia.
  4. Baird, A., Diaferia, R., Palermo, A. and Pampanin, S. (2011), "Parametric investigation of seismic interaction between precast concrete cladding systems and moment resisting frames", ASCE Structures Congress, Las Vegas, USA, April.
  5. Behr, R.A. (1998), "Seismic performance of architectural glass in mid-rise curtain wall", J. Architec. Eng., 4(3), 94-98. https://doi.org/10.1061/(ASCE)1076-0431(1998)4:3(94)
  6. Behr, R.A. and Belarbi, A. (1996), "Seismic test methods for architectural glazing systems", Earthq. Spectra, 12(1), 129-143. https://doi.org/10.1193/1.1585871
  7. Bupp, R.T., Bernstein, D.S., Chellaboina, V.S. and Haddad, W.M., (2000), "Resetting virtual absorbers for vibration control", J. Vib. Control, 6(1), 61-83. https://doi.org/10.1177/107754630000600104
  8. Hareer, R.W. (2007), "Seismic response of building facade with energy absorbing connections", Ph.D. Dissertation, Queensland University of Technology, Brisbane, Australia.
  9. De Matteis, G. (2005), "Effect of lightweight cladding panels on the seismic performance of moment resisting steel frames", Eng. Struct., 27(11), 1662-1676. https://doi.org/10.1016/j.engstruct.2005.06.004
  10. Fu, T.S. and Johnson, E.A. (2013), "Active control for a distributed mass damper system", J. Eng. Mech., 140(2), 426-429.
  11. Fu, T.S. and Johnson, E.A. (2010), "Distributed mass damper system for integrating structural and environmental controls in buildings", J. Eng. Mech., 137(3), 205-213.
  12. Goodno, B.J., Pinelli, J.P and Craig, J.I. (1996), "An Optimal design approach for passive damping of building structures using architectural Cladding", Proceeding of the Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico, June.
  13. Hunt, J.P. (2010), "Seismic performance assessment and probabilistic repair cost analysis of precast concrete cladding systems for multistory buildings", Ph.D. Dissertation, University of California, Berkeley, USA.
  14. Ji, H.R., Moon, Y.J., Kim, C.H. and Lee, I.W. (2005), "Structural vibration control using semiactive tuned mass damper", The eighteenth KKCNN Symposium on Civil Engineering-KAIST6, Taiwan, December.
  15. Li, B., Hutchinson, G.L. and Duffield, C.F. (2011), "The influence of non‐structural components on tall building stiffness", Struct. Des. Tall Spec. Build., 20(7), 853-870. https://doi.org/10.1002/tal.565
  16. Li, C. and Lio, Y, (2002), "Further characteristics for multiple tuned mass dampers", J. Struct. Eng., 128(10), 1362-1365. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1362)
  17. Maneetes, H. and Memari, A.M. (2014), "Introduction of an innovative cladding panel system for multistory buildings", Buildings, 4(3), 418-436. https://doi.org/10.3390/buildings4030418
  18. Moon, K. (2009), "Tall building motion control using double skin façades", J. Architec. Eng., 15(3), 84-90. https://doi.org/10.1061/(ASCE)1076-0431(2009)15:3(84)
  19. Pinelli, J.P., Craig, J.I. and Goodno, B.J. (1995), "Energy-based seismic design of ductile cladding systems", J. Struct. Eng., 121(3), 567-578. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(567)
  20. Thambiratnam, D. (2010), "Seismic mitigation of building structural systems using passive dampers", Proreeding of the 9th US National and 10th Canadian Conference on Earthquake Engineering, Torento, December.
  21. Yankelevsky, D.Z., Schwarz, S. and Karinski, Y. (2011), "Theory and practice in reducing the vulnerability of residential buildings subjected to extreme loads-a multi hazard perspective", Appl. Mech. Mater.,82(2), 3-14. https://doi.org/10.4028/www.scientific.net/AMM.82.3