Structural Engineering and Mechanics

  • 제57권4호
  • /
  • Pages.587-602
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A response surface method based on sub-region of interest for structural reliability analysis

  • Zhao, Weitao (Key Laboratory of Liaoning Province for Composite Structural Analysis of Aerocraft and Simulation, Shenyang Aerospace University) ;
  • Shi, Xueyan (Key Laboratory of Liaoning Province for Composite Structural Analysis of Aerocraft and Simulation, Shenyang Aerospace University) ;
  • Tang, Kai (Key Laboratory of Liaoning Province for Composite Structural Analysis of Aerocraft and Simulation, Shenyang Aerospace University)
  • 투고 : 2015.05.20
  • 심사 : 2015.12.10
  • 발행 : 2016.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

In structural reliability analysis, the response surface method is widely adopted because of its numerical efficiency. It should be understood that the response function must approximate the actual limit state function accurately in the main region influencing failure probability where it is evaluated. However, the size of main region influencing failure probability was not defined clearly in current response surface methods. In this study, the concept of sub-region of interest is constructed, and an improved response surface method is proposed based on the sub-region of interest. The sub-region of interest can clearly define the size of main region influencing failure probability, so that the accuracy of the evaluation of failure probability is increased. Some examples are introduced to demonstrate the efficiency and the accuracy of the proposed method for both numerical and implicit limit state functions.

키워드

과제정보

연구 과제 주관 기관 : Aerospace Science Foundation of China, University of China

참고문헌

  1. Allaix, D.L. and Carbone, V.I. (2011), "An improvement of the response surface method", Struct. Saf., 33(2), 165-172. https://doi.org/10.1016/j.strusafe.2011.02.001
  2. Basaga, H.B., Bayraktar, A. and Kaymaz, I. (2012), "An improved response surface method for reliability analysis of structures", Struct. Eng. Mech., 42(2), 175-189. https://doi.org/10.12989/sem.2012.42.2.175
  3. Blatman, G. and Sudret, B. (2010), "An adaptive algorithm to build up sparse polynomial chaos expansions for stochastic finite element analysis", Prob. Eng. Mech., 25(2), 183-97. https://doi.org/10.1016/j.probengmech.2009.10.003
  4. Borri, A. and Speranzini, E. (1997), "Structural reliability analysis using a standard deterministic finite element code", Struct. Saf., 19(4), 361-382. https://doi.org/10.1016/S0167-4730(97)00017-9
  5. Bucher, C.G. and Bourgund, U. (1990), "A fast and efficient response surface approach for structural reliability problems", Struct. Saf., 7(1), 57-66. https://doi.org/10.1016/0167-4730(90)90012-E
  6. Ditlevsen, O. and Madsen, H.O. (1996), Structural Reliability Methods, Chischester,Wiley, UK.
  7. Duprat, F. and Sellier, A. (2006), "Probabilistic approach to corrosion risk due to carbonation via an adaptive response surface method", Prob. Eng. Mech., 21(3), 207-216. https://doi.org/10.1016/j.probengmech.2005.11.001
  8. Elegbede, C. (2005), "Structural reliability assessment based on particles swarm optimization", Struct. Saf., 27(2), 171-186. https://doi.org/10.1016/j.strusafe.2004.10.003
  9. Gavin, H.P. and Yau, S.C. (2008), "High-order limit state functions in the response surface method for structural reliability analysis", Struc. Saf., 30(2), 162-179. https://doi.org/10.1016/j.strusafe.2006.10.003
  10. Gayton, N., Bourinet, J.M. and Lemaire, M. (2003), "CQ2RS: a new statistical approach to the response surface method for reliability analysis", Struct. Saf., 25(1), 99-121. https://doi.org/10.1016/S0167-4730(02)00045-0
  11. Hasofer, A.M. and Lind, N.C. (1974), "Exact and invariant second-moment code format", J. Eng. Mech., ASCE, 100(1), 111-121.
  12. Kaymaz, I. and Chris, A.M. (2005), "A response surface method based on weighted regression for structural reliability analysis", Prob. Eng. Mech., 20(1), 11-17. https://doi.org/10.1016/j.probengmech.2004.05.005
  13. Khuri, A.I. and Cornell, J.A. (1997), Response Surfaces: Design and Analyses, Marcel and Dekker, New York.
  14. Kim, S. and Na, S. (1997), "Response surface method using vector projected sampling points", Struct. Saf., 19(1), 3-19. https://doi.org/10.1016/S0167-4730(96)00037-9
  15. Kiureghian, D.A., Lin, H.Z. and Hwang, S.J. (1987), "Second order reliability approximations", J. Eng. Mech., ASCE, 113(8), 1208-1225. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:8(1208)
  16. Mohammadi, R., Massumi, A and Meshkat-Dini, A. (2015), "Structural reliability index versus behavior factor in RC frames with equal lateral resistance", Earthq. Struct., 8(5), 995-1016. https://doi.org/10.12989/eas.2015.8.5.995
  17. Myers, R.H. and Montgomery, D.C. (1995), Response Surface Methodology: Process and Product Optimization using Designed Experiments,Wiley, Chischester, UK.
  18. Nguyen, X.S., Sellier, A., Duprat, F. and Pons, G. (2009), "Adaptive response surface method based on a double weighted regression technique", Prob. Eng. Mech., 24(2), 135-143. https://doi.org/10.1016/j.probengmech.2008.04.001
  19. Rackwitz, R. and Fiessler, B. (1978), "Structural reliability under combined random load sequences", Comput. Struct., 9(5), 489-494. https://doi.org/10.1016/0045-7949(78)90046-9
  20. Rajashekhar, M.R. and Ellingwood, B.R. (1993), "A new look at the response surface approach for reliability analysis", Struct. Saf., 12(3), 205-220. https://doi.org/10.1016/0167-4730(93)90003-J
  21. Roussouly, N., Petitjean, F. and Salaun, M. (2013), "A new adaptive response surface method for reliability analysis", Prob. Eng. Mech., 32,103-15. https://doi.org/10.1016/j.probengmech.2012.10.001
  22. Su, G., Jiang, J., Yu, B. and Xiao, Y. (2015), "A Gaussian process-based response surface method for structural reliability analysis", Struct. Eng. Mech., 56(4), 507-534. https://doi.org/10.12989/sem.2015.56.4.507
  23. Wong, S.M., Hobbs, R.E. and Onof, C. (2005), "An adaptive response surface method for reliability analysis of structures with multiple loading sequences", Struct. Saf., 27(4), 287-308. https://doi.org/10.1016/j.strusafe.2005.02.001
  24. Zhao, W. and Qiu, Z. (2013), "An efficient response surface method and its application to structural reliability and reliability-based optimization", Finite Elem. Anal. Des., 67, 34-42. https://doi.org/10.1016/j.finel.2012.12.004
  25. Zhao, W., Qiu, Z. and Yang, Y. (2013), "An efficient response surface method considering the nonlinear trend of the actual limit state", Struct. Eng. Mech., 47(1), 45-58. https://doi.org/10.12989/sem.2013.47.1.045

피인용 문헌

  1. Reliability-based design optimization using reliability mapping functions vol.62, pp.2, 2016, https://doi.org/10.12989/sem.2017.62.2.125
  2. Degradation reliability modeling of plain concrete for pavement under flexural fatigue loading vol.9, pp.5, 2020, https://doi.org/10.12989/acc.2020.9.5.469
  3. A novel reliability analysis method based on Gaussian process classification for structures with discontinuous response vol.75, pp.6, 2016, https://doi.org/10.12989/sem.2020.75.6.771