DOI QR코드

DOI QR Code

Comparison of Different Numerical Models of RC Elements for Predicting the Seismic Performance of Structures

  • Zendaoui, Abdelhakim (Department of Civil Engineering, University of Batna 2) ;
  • Kadid, A. (Department of Civil Engineering, University of Batna 2) ;
  • Yahiaoui, D. (Department of Civil Engineering, University of Freres Mentouri)
  • 투고 : 2016.02.09
  • 심사 : 2016.09.09
  • 발행 : 2016.12.30

초록

This paper aims to provide guidelines for the numerical modeling of reinforced concrete (RC) frame elements in order to assess the seismic performance of structures. Several types of numerical models RC frame elements are available in nonlinear structural analysis packages. Since these numerical models are formulated based on different assumption and theories, the models accuracy, computing time, and applicability vary, which poses a great difficulty to practicing engineering and limits their confidence in the analysis resultants. In this study, the applicability of four representative numerical models of RC frame elements is evaluated through comparison with experimental results of four-storey bare frame available from European Laboratory for Structural Assessment. The accuracy of a numerical model is evaluated according to the top displacement, interstorey drift, Maximum storey shear, damage pattern and energy dissipation capacity of the frame structure. The results obtained allow a better understanding of the characteristics and potentialities of all procedures, helping the user to choose the best approach to perform nonlinear analysis.

키워드

참고문헌

  1. Almeida, J. P.,Das, S.,&Pinho, R. (2012). RC frame analysiswith a new damage-following model. World Conference on Earthquake Engineering (15WCEE), Lisboa, Portugal, 2012.
  2. Berry, M. P., & Eberhard, M. O. (2005). Practical performance model for bar buckling. Journal of Structural Engineering, 131, 1060-1070. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:7(1060)
  3. Berry, M. P., Lehman, D. E., & Lowes, L. N. (2008). Lumpedplasticity models for performance simulation of bridge columns. ACI Structural Journal, 105, 270-279.
  4. Calabrese, A., Almeida, J. P., & Pinho, R. (2010). Numerical issues in distributed inelasticity modeling of RC frame elements for seismic analysis. Journal of Earthquake Engineering, 14(S1), 38-68. https://doi.org/10.1080/13632461003651869
  5. Carvalho, E. C., Coelho, E., & Campos-Costa, A. (1999). Preparation of the full-scale tests on reinforced concrete frames. Characteristics of the test specimens, materials and testing conditions, ICONS Report, Innovative Seismic Design Concepts for New and Existing Structures, European TMR Network, LNEC.
  6. Coleman, J., & Spacone, E. (2001). Localization issues in forcebased frame elements. Journal of Structural Engineering, 127, 1257-1265. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1257)
  7. Eberhard, M. O. (2000). Consequences of bridge damage on functionality. Proc., PEER Invitational Workshop on Performance-Based Engineering Concepts for Bridges, Palo Alto, Calif.
  8. FEMA-273. (1997). NEHRP guidelines for the seismic rehabilitation of buildings. Washington, DC.
  9. FEMA-356. (1997). Prestandard and commentary for the seismic rehabilitation of buildings. Washington, DC.
  10. Filippou, F. C. & Fenves, G. L. (2004). Methods of analysis for earthquake-resistant structures. Earthquake engineering: From engineering seismology to performance-based engineering, Bozorgnia Y, Bertero V V. eds. Chap. 6, CRC, Boca Raton, FL.
  11. Giberson, M. F. (1967). The response of nonlinear multi-story structures subjected to earthquake excitation, doctoral Dissertation, California Institute of Technology, Pasadena, CA, pp.232.
  12. Giberson, M. F. (1969). Two nonlinear beams with definition of ductility. Journal of the Structural Division, ASCE, 95(2), 137-157.
  13. Hashemi, S. S., & Vaghefi, M. (2012). Cyclic analysis of RC frames with respect to employing different methods in the fiber model for consideration of bond-slip effect. Turkish J. Eng. Env. Sci, 36, 1-18.
  14. Huang, X., & Kwon, O. (2015). Numerical models of RC elements and their impacts on seismic performance assessment. Earthquake Engineering and Structural Dynamics, 44, 283-298. https://doi.org/10.1002/eqe.2471
  15. Inel, M., & Ozmen, H. B. (2006). Effects of plastic hinge properties in nonlinear analysis of reinforced concrete buildings. Engineering Structures, 28, 1494-1502. https://doi.org/10.1016/j.engstruct.2006.01.017
  16. Jeong, S. H., & Elnashai, A. S. (2005). Analytical assessment of an irregular RC frame for full scale 3D pseudo-dynamic testing Part I: analytical model verification. Journal of Earthquake Engineering, 9, 95-128.
  17. Ladjinovic, D. J., Raseta, A., Radujkovic, A., Folic, R., & Prokic, A. (2012). Comparison of structural models for seismic analysis of multi-storey frame buildings. World Conference on Earthquake Engineering (15WCEE), Lisbon, Portugal, 2012.
  18. Lehman, D. E., Gookin, S. E., Nacamuli, A. M., & Moehle, J. P. (2001). Repair of earthquake-damaged bridge columns. ACI Structural Journal, 98(2), 233-242.
  19. Limkatanyu, S., & Spacone, E. (2002). Reinforced concrete frame element with bond interfaces. I: displacement-based, force-based, and mixed formulations. Journal of Structural Engineering, 128, 346-355. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(346)
  20. Mander, J., Priestley, M., & Park, R. (1988). Theoretical stressstrain model for confined concrete. Journal of Structural Engineering, 114, 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  21. Mazza, F., & Mazza, M. (2010). Nonlinear analysis of spatial framed structures by a lumped plasticity model based on the Haar-Karman principle. Computational Mechanics, 45, 647-664. https://doi.org/10.1007/s00466-010-0478-0
  22. Menegotto, M., & Pinto, P. E. (1973). Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending moment (pp. 15-22). Lisbon, Portugal: IASBE Proceedings.
  23. Panagiotakos, T. B., & Fardis, M. N. (2001). Deformations of reinforced concrete members at yielding and ultimate. ACI Structural Journal, 98, 135-148.
  24. Park, R., & Paulay, T. (1975). Reinforced concrete structures. NY: Wiley.
  25. Paulay, T., & Priestley, M. (1992). Seismic design of reinforced concrete and masonry buildings (p. 767). NY: John Wiley and Sons.
  26. Pinto, A. V. G., Verzeletti, G., Molina, J., Varum, H., Pinho, R., & Coelho, E. (2002). Pseudo-dynamic tests on non-seismic resisting RC frames (bare and selective retrofit frames). European Laboratory for Structural Assessment (ELSA), Research Report EUR20244 EN, Joint Research Centre, Ispra, Italy.
  27. Popovics, S. (1973). A numerical approach to the complete stress-strain curve of concrete. Cement and Concrete Research, 3, 583-599. https://doi.org/10.1016/0008-8846(73)90096-3
  28. Priestley, M. J. N., & Park, R. (1987). Strength and ductility of concrete bridge columns under seismic loading. ACI Structural Journal, 84(1), 61-76.
  29. Priestley, M. J. N., Verma, R., & Xiao, Y. (1994). Seismic shear strength of reinforced concrete columns. Journal of Structural Engineering, 120(8), 2310-2329. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2310)
  30. Ramin, K., & Fereidoonfar, M. (2015). Finite element modeling and nonlinear analysis for seismic assessment of off-diagonal steel braced RC frame. International Journal of Concrete Structures and Materials, 9(1), 89-118. https://doi.org/10.1007/s40069-014-0089-9
  31. Richart, F. E., Brandtzæg, A., & Brown, R. L. (1928). A study of the failure of concrete under combined compressive stresses. University of Illinois Bulletin, 26(12).
  32. Rodrigues, H., Varum, H., Arede, A., & Costa, A. (2012). Comparative efficiency analysis of different nonlinear modelling strategies to simulate the biaxial response of RC columns. Earthquake Engineering and Engineering Vibration, 11, 553-566. https://doi.org/10.1007/s11803-012-0141-1
  33. Rodriguez, M. E., Botero, J. C., & Villa, J. (1999). Cyclic stress-strain behavior of reinforcing steel including effect of buckling. Journal of Structural Engineering, 125, 605-612. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(605)
  34. Roh, H., Reinhorn, A. M., & Lee, J. S. (2012). Power spread plasticity model for inelastic analysis of reinforced concrete structures. Engineering Structures, 39, 148-161. https://doi.org/10.1016/j.engstruct.2012.01.019
  35. Scott, M. H. & Fenves, G. L. (2006). Plastic hinge integration methods for force-based beam-column elements. Journal of Structural Engineering ASCE, 132, 244-252. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(244)
  36. Scott, M. H., Franchin, P., Fenves, G. L., & Filippou, F. C.(2004). Response sensitivity for nonlinear beam-column elements. Journal of Structural Engineering ASCE, 130, 1281-1288. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:9(1281)
  37. Scott, B. D., Park, R., & Priestley, M. J. N. (1982). Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates. ACI Journal, 79, 13-27.
  38. SeismoSoft, SeismoStruct v7. (2015). A computer program for static and dynamic nonlinear analysis of framed structures, available from URL: http//www.seismosoft.com.

피인용 문헌

  1. Experimental and Numerical Researches on the Seismic Behavior of Tubular Reinforced Concrete Columns of Air-Cooling Structures vol.11, pp.3, 2016, https://doi.org/10.1007/s40069-017-0207-6
  2. Finite element modeling assumptions impact on seismic response demands of MRF-buildings vol.17, pp.4, 2016, https://doi.org/10.1007/s11803-018-0478-1
  3. Modelling of Stirrup Confinement Effects in RC Layered Beam Finite Elements Using a 3D Yield Criterion and Transversal Equilibrium Constraints vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0278-z
  4. Fiber element-based nonlinear analysis of concrete bridge piers with consideration of permanent displacement vol.69, pp.3, 2016, https://doi.org/10.12989/sem.2019.69.3.243
  5. Comparisons Between Pull-Out Behaviour of Various Hooked-End Fibres in Normal-High Strength Concretes vol.13, pp.1, 2016, https://doi.org/10.1186/s40069-019-0337-0
  6. The accuracy of the lumped plasticity model for estimating nonlinear behavior of reinforced concrete frames under gradually increasing vertical loads vol.21, pp.1, 2016, https://doi.org/10.1002/suco.201800357
  7. The effect of finite element modeling assumptions on collapse capacity of an RC frame building vol.18, pp.5, 2020, https://doi.org/10.12989/eas.2020.18.5.555
  8. Nonlinear flexibility-based beam element on Winkler-Pasternak foundation vol.24, pp.4, 2016, https://doi.org/10.12989/gae.2021.24.4.371