Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Analytical performance evaluation of modified inclined studs for steel plate concrete wall subjected to cyclic loads

  • Received : 2015.10.06
  • Accepted : 2015.12.14
  • Published : 2016.02.25
⟨ Previous Next ⟩

Abstract

An analytical study was conducted to investigate the effect of the shape and spacing of modified inclined studs used as shear connector between concrete and steel plate on the cyclic behavior of steel plate concrete (SC) shear wall. 9 different analysis cases were adopted to determine the optimized shape and spacing of stud. As the results, the skeleton curves were obtained from the load-displacement hysteresis curves, and the ultimate and yielding strengths were increased as the spacing of studs decrease. In addition, the strength of inclined studs is shown to be bigger compared to that of conventional studs. The damping ratios increased as the decrease of stiffness ratio. Finally, with decreasing the spacing distance of studs, the cumulative dissipated energy was increased and the seismic performance was improved.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea

References

  1. ACI Committee 318-11 (2011), Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary (ACI 318R-11), Farmington Hills (MI): American Concrete Institute.
  2. Carreira, D.J. and Chu, K.H. (1985), "Stress-strain relationship for plain concrete in compression", ACI J., 82(6), 797-804.
  3. Cho, S.G., So, G.H. and Park, W.K. (2013), "Investigation of damping ratio of steel plate concrete shear wall by lateral loading test&impact test", J. Earthq. Eng. Soc. Korea, 17(2), 79-88. (in Korean) https://doi.org/10.5000/EESK.2013.17.2.079
  4. Cho, S.G., Lim, J.S., Jeong, Y.D., Yi, S.T. and Han, S.M. (2014), "Analytical study for performance improvement of studs for steel plate concrete walls subjected to bending moment", Eng. Struct. (submitted)
  5. Cho, S.G. and Yi, S.T. (2014), "Shape and arrangement of developed studs in a steel plate concrete wall subjected to shear force and axial force", P. I. Civil Eng.-Str. B. (submitted)
  6. Elmenshawi, A. and Brown, T. (2010), "Hysteretic energy and damping capacity of flexural elements constructed with different concrete strengths", Eng. Struct., 32(1), 297-305. https://doi.org/10.1016/j.engstruct.2009.09.016
  7. Epackachi, S., Nguyen, N., Kurt, E., Whittaker, A. and Varma, A. (2015), "In-plane seismic behavior of rectangular steel-plate composite wall piers", J. Struct. Eng., 141(7), 04014176. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001148
  8. Evans, R.H. and Marathe, M.S. (1967), "Microcracking and stress-strain curves for concrete in tension", Mater. Struct., 1(1), 61-64.
  9. Jankowiak, T. and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Foundation of Civil and Environmental Engineering, No. 6, Poznan university of technology, Poland.
  10. Korea Concrete Institute (KCI) (2012), The Korean Concrete Structure Design Code, Korea Concrete Institute. (in Korean)
  11. Korea Electric Association (KEA) (2010), Nuclear Safety Related Structures: Steel-Plate Concrete Structure, Korea Electric Association. (in Korean)
  12. Lee, K.H., Kim, H.C., Hong, W.K. and Lee, Y.H. (2007), "Capacity of concrete filled carbon tube columns based on the comparison of ductility and energy dissipation capacity", J. Earthq. Eng. Soc. Korea, 11(1), 29-35. (in Korean) https://doi.org/10.5000/EESK.2007.11.1.029
  13. Lee, S.J. and Kim, W.K. (2010), "Damping ratios for seismic design of SC structures", J. Korean Soc. Steel Constr., 22(5), 487-496. (in Korean)
  14. Lim, J.S., Jeong, Y.D. and Yi, S.T. (2015), "Analytical study for performance evaluation of studs for steel plate concrete walls subjected to cyclic loads", J. Korea Inst. Struct. Maint. Insp., 19(4), 35-42.
  15. Ozaki, M., Akita, S., Oosuga, H., Nakayama, T. and Adachi, N. (2004), "Study on steel plate reinforced concrete panels subjected to cyclic in-plane shear", Nucl. Eng. Des., 228(1), 225-244. https://doi.org/10.1016/j.nucengdes.2003.06.010
  16. Prakash, A., Anandavalli, N., Madheswaran, C.K., Rajasankar, J. and Lakshmanan, N. (2011), "Three dimensional FE model of stud connected steel-concrete composite girders subjected to monotonic loading", Int. J. Mech. Appl., 1(1), 1-11.
  17. Ren, W., Sneed, L.H., Gai, Y. and Kang, X. (2015a), "Test results and nonlinear analysis of RC T-beams strengthened by bonded steel plates", Int. J. Concrete Struct. Mater., 9(2), 133-143. https://doi.org/10.1007/s40069-015-0098-3
  18. Ren, W., Sneed, L.H., Yang, Y. and He, R. (2015b), "Numerical simulation of prestressed precast concrete bridge deck panels using damage plasticity model", Int. J. Concrete Struct. Mater., 9(1), 45-54. https://doi.org/10.1007/s40069-014-0091-2
  19. Shahidul Islam, S.M. and Khennane, A. (2013), "Computer aided design of RC structures", Int. J. Concrete Struct. Mater., 7(2), 127-133. https://doi.org/10.1007/s40069-012-0027-7
  20. Vecchio, F.J. and McQuade, I. (2011), "Towards improved modeling of steel-concrete composite wall elements", Nucl. Eng. Des., 241(8), 2629-2642. https://doi.org/10.1016/j.nucengdes.2011.04.006