참고문헌
- C. R. Paul, Introduction to Electromagnetic Compatibility, 2nd ed., John Wiley & Sons, 93(7-8), pp.1-12, 2006.
- G. L. Skibinski and D. M. Divan, "Design methodology and modeling of low inductance planar bus structures," European Conference on Power Electronics and Applications, Vol. 3, pp. 98-105, Sep. 1993.
- M. C. Caponet, F. Profumo, R. W. De Doncker, and A. Tenconi, "Low stray inductance bus bar design and construction for good EMC performance in power electronic circuit," IEEE Trans. Power Electron., Vol. 17, No. 2, pp. 225-231, Mar. 2002. https://doi.org/10.1109/63.988833
- R. Yi, Z. M. Zhao, and L. Q. Yuan, "Busbar optimization design for high power converters," Trans. China Electrotechnical Society, Vol. 23, No. 8, pp. 94-100, Aug. 2008.
- A. T. Bryant, K. K. Vadlapati, J. P. Starkey, A. P. Goldney, S. Y. Kandilidis, and D. A. Hinchley, "Current distribution in high power laminated busbars," in Proc. 14th European Conference on Power Electronics and Applications, pp.1-10, 2011.
- C. Chen, X. Pei, Y. Chen, and Y. Kang, "Investigation, evaluation, and optimization of stray inductance in laminated busbar," IEEE Trans. Power Electron., Vol. 29, No. 7, pp. 3679-3693, Sep. 2014. https://doi.org/10.1109/TPEL.2013.2282621
-
B. Gultekin and M. Ermis, "Cascaded multilevel converter-based transmission statcom: System design methodology and development of a 12 kv
${\pm}12$ mvar power stage," IEEE Trans. Power Electron., Vol. 28, No. 11, pp. 4930-4950, Jan. 2013. https://doi.org/10.1109/TPEL.2013.2238642 - F. Zare and G. F. Ledwich, "Reduced layer planar busbar for voltage source inverters," IEEE Trans. Power Electron., Vol. 17, No. 4, pp. 508-516, Jul. 2002. https://doi.org/10.1109/TPEL.2002.800990
- L. Smirnova, R. Juntunen, K. Murashko, T. Musikka, and J. Pyrhonen, "Thermal analysis of the laminated busbar system of a multilevel converter," IEEE Trans. Power Electron., Vol. 31, No.2, pp. 1479-1488, Apr. 2016. https://doi.org/10.1109/TPEL.2015.2420593
- H. Wen and W. Xiao, "Design and optimization of laminated busbar to reduce transient voltage spike," in Proc. 2012 IEEE International Symposium on Industrial Electronics (ISIE), pp.1478-1483, 2012.
- H. Yu, Z. Zhao, T. Lu, L. Yuan, and S. Ji, "Laminated busbar design and stray parameter analysis of three-level converter based on HVIGBT series connection," in Proc. IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 3201-3207, 2015.
- A. Plesca, "Busbar heating during transient conditions. Electric Power Systems Research," Vol. 89, pp. 31-37, Aug. 2012. https://doi.org/10.1016/j.epsr.2012.02.011
- J. Hus, "Estimating busbar temperatures," IEEE Trans. Ind. App., Vol. 26, No. 5 , pp. 926-934, Oct. 1990. https://doi.org/10.1109/28.60064
- R. T. Coneybeer, W. Z. Black, and R. A. Bush, "Steady-state and transient ampacity of bus bar," IEEE Trans. Power Del., Vol. 9, No. 4 , pp.1822-1829, Oct. 1994. https://doi.org/10.1109/61.329515
- H. T. Chen, D. Y. Lin, S. C. Tan, and S. Y. R. Hui, "Chromatic, photometric and thermal modeling of led systems with nonidentical LED devices," IEEE Trans. Power Electron., Vol. 29, No.12, pp. 6636-6647, Jan. 2014. https://doi.org/10.1109/TPEL.2014.2302453
- D. Zhou, F. Blaabjerg, M. Lau, and M. Tonnes, "Thermal analysis of multi-mw two-level wind power converter," in Proc. IEEE Press, Vol. 2, No.1, pp. 5858-5864, 2012.
- X. W. Wu, N. Q. Shu, H. T. Li, and L. Li, "Contact temperature prediction in three-phase gas-insulated bus bars with the finite-element method," IEEE Trans. Mag., Vol. 50, No.2, pp. 277-280, Feb. 2014. https://doi.org/10.1109/TMAG.2013.2282033
- Y. Alexandrova, R. S. Semken, and J. Pyrhonen, "Permanent magnet synchronous generator design solution for large direct-drive wind turbines: Thermal behavior of the lc dd-pmsg," Applied Thermal Engineering, Vol. 65, No. 1-2, pp. 554-563, Apr. 2014. https://doi.org/10.1016/j.applthermaleng.2014.01.054
- N. Rostami, M. R. Feyzi, and J. Pyrhonen, A. Parviainen, and M. Niemela, "Lumped-parameter thermal model for axial flux permanent magnet machines," IEEE Trans. Mag., Vol. 49, No. 3, pp. 1178-1184, Jul. 2013. https://doi.org/10.1109/TMAG.2012.2210051
- C. Chen, X. Pei, Y. Shi, and X. Lin, "Modeling and optimization of high power inverter three-layer laminated busbar," in Proc. Energy Conversion Congress and Exposition, Vol. 11, pp.1380-1385, 2012.
- A. Hino and K. Wada, "Resonance analysis for DC-side laminated bus-bar of a high speed switching circuit," in Proc. IEEE Future Energy Electronics Conference, pp. 751-756, 2013.
- T. Hong, "Current capability enhancement of bus bars or PCBs by thermal conduction," in Power Conversion Intelligent Motion, 2012.
- H. Li, "Study on key thchnology of high power three-level converter and dirve control system of synchronous motor," Ph.D. Dissertation, China University of Mining and Technology, China, 2010.
- B. Cadilhon, L. Pecastaing, T. Reess, and A. Gibert, "Low-stray inductance structure to improve the rise-time of a marx generator," IET Electric Power Applications, Vol. 2, No. 4, pp. 248-255, Jul. 2008. https://doi.org/10.1049/iet-epa:20070250
- R. J. Pasterczyk, C. Martin, J. M. Guichon, and J. L. Schanen, "Planar busbar optimization regarding current sharing and stray inductance minimization," in Proc. IEEE 2005 European Conference on Power Electronics and Applications, pp. 9 -P.9, 2005.
- R. Wrobel and P. H. Mellor, "A general cuboidal element for three-dimensional thermal modeling," IEEE Trans. Mag., Vol. 46, No.8, pp. 3197-3200, Aug. 2010. https://doi.org/10.1109/TMAG.2010.2043928
피인용 문헌
- Power Device Thermal Fault Tolerant Control of High-Power Three-Level Explosion-Proof Inverter Based on Holographic Equivalent Dual-Mode Modulation vol.2017, pp.1563-5031, 2017, https://doi.org/10.1155/2017/6961832