DOI QR코드

DOI QR Code

Numerical simulation of dynamic Interactions of an arctic spar with drifting level ice

  • Jang, H.K. (Department of Ocean Engineering, Texas A&M University) ;
  • Kang, H.Y. (Department of Ocean Engineering, Texas A&M University) ;
  • Kim, M.H. (Department of Ocean Engineering, Texas A&M University)
  • 투고 : 2016.08.19
  • 심사 : 2016.10.20
  • 발행 : 2016.12.25

초록

This study aims to develop the numerical method to estimate level ice impact load and investigate the dynamic interaction between an arctic Spar with sloped surface and drifting level ice. When the level ice approaches the downward sloped structure, the interaction can be decomposed into three sequential phases: the breaking phase, when ice contacts the structure and is bent by bending moment; the rotating phase, when the broken ice is submerged and rotated underneath the structure; and the sliding phase, when the submerged broken ice becomes parallel to the sloping surface causing buoyancy-induced fictional forces. In each phase, the analytical formulas are constructed to account for the relevant physics and the results are compared to other existing methods or standards. The time-dependent ice load is coupled with hull-riser-mooring coupled dynamic analysis program. Then, the fully coupled program is applied to a moored arctic Spar with sloped surface with drifting level ice. The occurrence of dynamic resonance between ice load and spar motion causing large mooring tension is demonstrated.

키워드

참고문헌

  1. Aksnes, V. (2010), "A simplified interaction model for moored ships in level ice", Cold Reg. Sci. Technol., 63(1), 29-39. https://doi.org/10.1016/j.coldregions.2010.05.002
  2. Barker, A. and Sayed, M. (2012), "Upward-or downward-breaking cones in ice: which one should you use", Proceedings of the 15th International Conference on Cold Regions Engineering, Canadian Society of Civil Engineers (CSCE), Quebec, Canada.
  3. Barker, A., Sudom, D. and Sayed, M. (2015), "Conical Structures in Ice: Ride-Up, Radius and Results", OTC Arctic Technology Conference.
  4. Bruun, P.K., Husvik, J., Le Guennec, S. and Hellmann, J.H. (2009), "Ice model test of an Arctic SPAR", Proceedings of the 20th International Conference on Port and Ocean Engineering Under Arctic Conditions.
  5. Croasdale, K.R. (1980), Ice forces on fixed rigid structures, Special report 80-26, U.S. Army Cold Regions Research and Engineering Laboratory, Hanover
  6. Croasdale, K.R., Cammaert, A.B. and Metge, M. (1994), "A method for the calculation of sheet ice loads on sloping structures", IAHR Ice Symposium, Trondheim, Norway.
  7. Frederking, R.M.W. and Timco, G.W. (1985), "Quantitative analysis of ice sheet failure against an inclined plane", J. Energ. Resour. Technol., 107(3), 381-387. https://doi.org/10.1115/1.3231205
  8. Hetenyi, M. (1946), Beams On Elastic Foundation;: Theory With Applications In The Fields Of Civil And Mechanical Engineery, University of Michigan press.
  9. ISO (2010), ISO 19906:2010 Petroleum and natural gas industries - Arctic offshore structures.
  10. Kang, H.Y. and Kim, M.H. (2012), "Hydrodynamic interactions and coupled dynamics between a container ship and multiple mobile harbors", Ocean Syst. Eng., 2(3), 217-228. https://doi.org/10.12989/ose.2012.2.3.217
  11. Kotras, T.V. (1983), "Predicting ship performance in level ice", SNAME Trans, 91, 329-349.
  12. Lindstrom, C.A. (1990), "Numerical estimation of ice forces acting on inclined structures and ships in level ice", Offshore Technology Conference.
  13. Liu, J., Lau, M. and Williams, F.M. (2006), "Mathematical modeling of ice-hull interaction for ship maneuvering in ice simulations", Proceedings of the 7th International Conference and Exhibition on Performance of Ships and Structures in Ice, Banff, Alberta, July
  14. Lu, W., Lubbad, R., Hoyland, K. and Loset, S. (2014), "Physical model and theoretical model study of level ice and wide sloping structure interactions",Cold Reg. Sci. Technol., 101, 40-72. https://doi.org/10.1016/j.coldregions.2014.01.007
  15. Matsuishi, M. and Ettema, R. (1985), The Dynamic Behavior Of A Floating, Cable-Moored Platform Continuously Impacted By Ice Floes: Iowa Institute of Hydraulic Research, the University of Iowa.
  16. Mayne, D.C. and Brown, T.G. (2000), "Rubble pile observations", Proceedings of the 10th International Offshore and Polar Engineering Conference.
  17. Nevel, D.E. (1965), "A semi-infinite plate on an elastic foundation", DTIC Document.
  18. Ralston, T.D. (1980), Plastic Limit Analysis Of Sheet Ice Loads On Conical Structures.-Physics And Mechanics Of Ice, 289-308. Springer.
  19. Toyama, Y. and Yashima, N. (1985), "Dynamic response of moored conical structures to a moving ice sheet", Proceedings of the 8th International Conference on Port and Ocean Engineering under Arctic Conditions.
  20. Wille, S.F., Kuiper, G.L. and Metrikine, A.V. (2011), "On the dynamic interaction between drifting level ice and moored downward conical structures: a critical assessment of the applicability of a beam model for the ice", Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering.
  21. Yang, C.K. and Kim, M.H. (2010), "Transient effects of tendon disconnection of a TLP by hull-tendon-riser coupled dynamic analysis", Ocean Eng., 37(8),667-677. https://doi.org/10.1016/j.oceaneng.2010.01.005
  22. Yang, C.K. and Kim, M.H. (2011), "The structural safety assessment of a tie-down system on a tension leg platform during hurricane events", Ocean Syst. Eng., 1 (4), 263-283. https://doi.org/10.12989/ose.2011.1.4.263

피인용 문헌

  1. Time-Domain Hydro-Elastic Analysis of a SFT (Submerged Floating Tunnel) with Mooring Lines under Extreme Wave and Seismic Excitations vol.8, pp.12, 2018, https://doi.org/10.3390/app8122386
  2. Kulluk-shaped arctic floating platform interacting with drifting level ice by discrete element method vol.236, pp.None, 2016, https://doi.org/10.1016/j.oceaneng.2021.109479