참고문헌
- J. He, Z. Cui, F. Chen, Y. Xiao and L. Ruan, "The new ductile fracture criterion for 30Cr2Ni4MoV ultra-super-critical rotor steel at elevated temperatures," Materials & Design, Vol. 52, pp. 547-555 (2013) https://doi.org/10.1016/j.matdes.2013.05.080
- F. Chen, Z. Cui, D. Sui and B. Fu, "Recrystallization of 30Cr2Ni4MoV ultra-supercritical rotor steel during hot deformation. Part III: Metadynamic recrystallization," Materials Science and Engineering: A, Vol. 540, No. 1, pp. 46-54 (2012) https://doi.org/10.1016/j.msea.2012.01.061
- T. Sundararajan, S. Kuroda, J. Kawakita and S. Seal, "High temperature corrosion of nanoceria coated 9Cr-1Mo ferritic steel in air and steam," Surface and Coatings Technology, Vol. 201, No. 6, pp. 2124-2130 (2006) https://doi.org/10.1016/j.surfcoat.2006.02.007
-
F. Abe, "Research and development of heat-resistant materials for advanced USC power plants with steam temperatures of 700
$^{\circ}$ C and above," Engineering, Vol. 1, No. 2, pp. 211-224 (2015) https://doi.org/10.15302/J-ENG-2015031 - D. Jiang, H. Xu, B. Deng, M. Li, Z. Xiao and N. Zhang, "Effect of oxygenated treatment on corrosion of the whole steam-water system in supercritical power plant," Applied Thermal Engineering, Vol. 93, pp. 1248-1253 (2016) https://doi.org/10.1016/j.applthermaleng.2015.10.098
- B. Raj, B. K Choudhary and R. K S. Raman, "Mechanical properties and non-destructive evaluation of chromium-molybdenum ferritic steels for steam generator application," International Journal of Pressure Vessels and Piping, Vol. 81, No. 6, pp. 521-534 (2004) https://doi.org/10.1016/j.ijpvp.2003.12.010
- C. S. Kim, K. S. Ryu, S. H. Nahm and S. S. Lee, "Characterization of the high temperature isothermal aging in USC ferrite steel using reversible permeability," Journal of Korean Magnetic Society, Vol. 19, No. 3, pp. 100-105 (2009) https://doi.org/10.4283/JKMS.2009.19.3.100
- C. S. Kim, I. H. Kim, I. K. Park and C. Y. Hyun, "Effect of isothermal aging on magnetic properties in 12Cr steel," Key Engineering Materials, Vol. 326-328, pp. 1201-1204 (2006) https://doi.org/10.4028/www.scientific.net/KEM.326-328.1201
- X. Guo, J. Gong, Y. Jiang and D. Rong, "The influence of long-term aging on microstructures and static mechanical properties of P92 steel at room temperature," Materials Science and Engineering: A, Vol. 564, pp. 199-205 (2013) https://doi.org/10.1016/j.msea.2012.10.024
- G. C. S. Nunes, P. W. C. Sarvezuk, V. Biondo, M. C. Blanco, M. V. S. Nunes, A. M. H. de Andrade and A. Paesano Jr., "Structural and magnetic characterization of martensitic Maraging-350 steel," Journal of Alloys and Compounds, Vol. 646, pp. 321-325 (2015) https://doi.org/10.1016/j.jallcom.2015.06.008
- R. A. Taylor, J. P. Jakubovics, B. Astie and J. Degauque, "Direct observation of the interaction between magnetic domain walls and dislocations in iron," Journal of Magnetism and Magnetic Materials, Vol. 31-34, No. 2, pp. 970-972 (1983) https://doi.org/10.1016/0304-8853(83)90758-8
- D. C. Jiles, "The effect of compressive plastic deformation on the magnetic properties of AISI 4130 steels with various microstructures," Journal of Physics D: Appl. Phys., Vol. 21, pp. 1196-1204 (1988) https://doi.org/10.1088/0022-3727/21/7/023
- S. P. Hong, K. S. Ryu and C. S. Kim, "Nondestructive characterization for remanent life of advanced ferritic steel by reversible permeability," Journal of the Korean Society for Nondestructive Testing, Vol. 33, No. 2, pp. 181-186 (2013) https://doi.org/10.7779/JKSNT.2013.33.2.181
- K. S. Ryu, M. G. Kim, S. H. Nahm and C. S. Kim, "Degradation evaluation of mechanical properties for 12Cr ferrite heat resisting steel by reversible permeability," Journal of the Korean Society for Nondestructive Testing, Vol. 30, No. 5, pp. 464-470 (2010)
- T. Nagata, "Principles of the ballistic magnetometer for the measurements of remanence," Developments in Solid Earth Geophysics, Vol. 3, pp. 105-114 (2013)
- B. D. Cullity, "Introduction to Magnetic Materials," Addison-Wesley, Reading, MA, p. 317 (1972)
- G. A. Webster and R. A. Ainsworth, "High Temperature Components Life Assessment," Chapman & Hall, London, p. 26 (1994)
- K. Davut and C. H. Gur, "Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic Barkhausen noise," Journal of Nondestructive Evaluation, Vol. 26, pp. 107-113 (2007) https://doi.org/10.1007/s10921-007-0025-x
- C, S. Kim, C. J. Lissenden, I. K. Park and K. S. Ryu, "Dynamic coercivity of advanced ferrite steel during long-term isothermal aging," Materials Transaction, Vol. 50, No. 11, pp. 2691-2694 (2009) https://doi.org/10.2320/matertrans.M2009170