Computers and Concrete

  • 제17권1호
  • /
  • Pages.29-51
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A tension stiffening model for analysis of RC flexural members under service load

  • Patel, K.A. (Civil Engineering Department, Indian Institute of Technology Delhi) ;
  • Chaudhary, Sandeep (Civil Engineering Department, Malaviya National Institute of Technology Jaipur) ;
  • Nagpal, A.K. (Civil Engineering Department, Indian Institute of Technology Delhi)
  • 투고 : 2015.02.13
  • 심사 : 2015.12.24
  • 발행 : 2016.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Tension-stiffening is the contribution of concrete between the cracks to carry tensile stresses after cracking in Reinforced Concrete (RC) members. In this paper, a tension-stiffening model has been proposed for computationally efficient nonlinear analysis of RC flexural members subjected to service load. The proposed model has been embedded in a typical cracked span length beam element. The element is visualized to consist of at the most five zones (cracked or uncracked). Closed form expressions for flexibility and stiffness coefficients and end displacements have been obtained for the cracked span length beam element. Further, for use in everyday design, a hybrid analytical-numerical procedure has been developed for nonlinear analysis of RC flexural members using the proposed tension-stiffening model. The procedure yields deflections as well as redistributed bending moments. The proposed model (and developed procedure) has been validated by the comparison with experimental results reported elsewhere and also by comparison with the Finite Element Method (FEM) results. The procedure would lead to drastic reduction in computational time in case of large RC structures.

키워드

참고문헌

  1. ABAQUS (2011), ABAQUS standard user's manuals, Version 6.11, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI, USA.
  2. ACI 318 (2005), Building code requirements for structural concrete, American Concrete Institute (ACI) Committee 318, Farmington Hills, MI, USA.
  3. Balakrishnan, S. and Murray, D.W. (1988), "Concrete constitutive model for NLFE analysis of structures", J. Struct. Eng., 114(7), 1449-1466. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:7(1449)
  4. Baskar, K., Shanmugam, N.E. and Thevendran, V. (2002), "Finite-element analysis of steel-concrete composite plate girder", J. Struct. Eng., 128(9), 1158-1168. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1158)
  5. Bischoff, P.H. (2005), "Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars", J. Struct. Eng., 131(5), 752-767. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(752)
  6. Borosnyoi, A. and Balazs, G.L. (2005), "Models for flexural cracking in concrete: the state of the art", Struct. Concrete, 6(2), 53-62. https://doi.org/10.1680/stco.2005.6.2.53
  7. CEN-Eurocode 2 (2004), Design of concrete structures-Part 1-1: General rules and rules for buildings, European Standard BS EN 1992-1-1:2004, Brussels.
  8. Cosenza, E. (1990), "Finite element analysis of reinforced concrete elements in a cracked state", Comput. Struct., 36(1), 71-79. https://doi.org/10.1016/0045-7949(90)90176-3
  9. Dai, J.G., Ueda, T., Sato, Y. and Nagai, K. (2012), "Modeling of tension stiffening behavior in FRPstrengthened RC members based on rigid body spring networks", Comput. Aid. Civil Infrastruct. Eng., 27(6), 406-418. https://doi.org/10.1111/j.1467-8667.2011.00741.x
  10. Ghali, A. (1993), "Deflection of reinforced concrete members: A critical review", ACI Struct. J., 90(4), 364-373.
  11. Ghali, A., Favre, R. and Elbadry, M. (2002), Concrete structures: Stresses and deformations, 3rd Edition, E and Spon, London, UK.
  12. Ghali, A., Neville, A.M. and Brown, T.G. (2003), Structural analysis: A unified classical and matrix approach, 5th Edition, Spon press, New York, USA.
  13. Gilbert, R.I. (2006), "Discussion of 'Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars' by Bischoff, P.H.", J. Struct. Eng., 132(8), 1328-1330. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:8(1328)
  14. Kalkan, I. (2010), "Deflection prediction for reinforced concrete beams through different effective moment of inertia expressions", Int. J. Eng. Res. Dev., 2(1), 72-80.
  15. Lackner, R. and Mang, H.A. (2003), "Scale transition in steel-concrete interaction. I: Model", J. Eng. Mech., 129(4), 393-402. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:4(393)
  16. Massicote, B., Elwi, A.E. and MacGregor, J.G. (1990), "Tension-stiffening model for planar reinforced concrete members", J. Struct. Eng., 116(11), 3039-3058. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3039)
  17. Ning, F., Mickleborough, N.C. and Chan, C.M. (1999), "The effective stiffness of reinforced concrete flexural members under service load conditions", Aust. J. Struct. Eng., 2, 135-144.
  18. Park, R. and Paulay, T. (1975), Reinforced concrete structures, John Wiley and Sons Inc., Canada.
  19. Parrotta, J.E., Peiretti, H.C., Gribniak, V. and Caldentey, A.P. (2014), "Investigating deformations of RC beams: experimental and analytical study", Comput. Concrete, 13(6), 799-827. https://doi.org/10.12989/cac.2014.13.6.799
  20. Patel, K.A., Bhardwaj, A., Chaudhary. S. and Nagpal, A.K. (2015), "Explicit expression for effective moment of inertia of RC Beams", Lat. Am. J. Solid Struct., 12(3), 542-560. https://doi.org/10.1590/1679-78251272
  21. Patel, K.A., Chaudhary. S. and Nagpal, A.K. (2014), "Analytical-numerical procedure incorporating cracking in RC beams", Eng. Comput., 31(5), 986-1010. https://doi.org/10.1108/EC-02-2013-0050
  22. Ramnavas, M.P., Patel, K.A., Chaudhary, S. and Nagpal, A.K. (2015), "Cracked span length beam element for service load analysis of steel concrete composite bridges", Comput. Struct., 157, 201-208. https://doi.org/10.1016/j.compstruc.2015.05.024
  23. Ruiz, M.F., Muttoni, A. and Gambarova, P.G. (2007), "Analytical modeling of the pre- and postyield behavior of bond in reinforced concrete", J. Struct. Eng., 133(10), 1364-1372. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1364)
  24. Sahamitmongkol, R. and Kishi, T. (2011), "Tension stiffening effect and bonding characteristics of chemically prestressed concrete under tension", Mater. Struct., 44(2), 455-474. https://doi.org/10.1617/s11527-010-9641-5
  25. Salys, D., Kaklauskas, G. and Gribniak, V. (2009), "Modelling deformation behaviour of RC beams attributing tension-stiffening to tensile reinforcement", Eng. Struct. Tech., 1(3), 141-147.
  26. Scanlon, A., Cagley Orsak, D.R. and Buettner, D.R. (2001), "ACI code requirements for deflection control: A critical review", ACI S.P, 203, 1-14.
  27. Shanmugam, N.E. and Baskar, K. (2003), "Steel-concrete composite plate girders subject to shear loading", J. Struct. Eng., 129(9), 1230-1242. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1230)
  28. Shayanfar, M.A. and Safiey, A. (2008), "A new approach for nonlinear finite element analysis of reinforced concrete structures with corroded reinforcements", Comput. Concrete, 5(2), 155-174. https://doi.org/10.12989/cac.2008.5.2.155
  29. Smadi, M.M. and Belakhdar, K.A. (2007), "Nonlinear finite element analysis of high strength concrete slabs", Comput. Concrete, 4(3), 187-206. https://doi.org/10.12989/cac.2007.4.3.187
  30. Stramandinoli, R.S.B. and Rovere, H.L.L. (2008), "An efficient tension-stiffening model for nonlinear analysis of reinforced concrete members", Eng. Struct., 30(7), 2069-2080. https://doi.org/10.1016/j.engstruct.2007.12.022
  31. Thevendran, V., Shanmugam, N.E., Chen, S. and Richard Liew J.Y. (2000), "Experimental study on steelconcrete composite beams curved in plan", Eng. Struct., 22(8), 877-889. https://doi.org/10.1016/S0141-0296(99)00046-2
  32. Vollum, R.L., Afshar, N. and Izzuddin, B.A. (2008), "Modelling short-term tension stiffening in tension members", Mag. Concrete Res., 60(4), 291-300. https://doi.org/10.1680/macr.2007.00125
  33. Washa, G.W. and Fluck, P.G. (1956), "Plastic flow (creep*) of reinforced concrete continuous beams", ACI Struct. J., 52(1), 549-561.
  34. Yu, W.W. and Winter, G. (1960), "Instantaneous and long-time deflections of reinforced concrete beams under working loads", ACI J., 57(1), 29-50.

피인용 문헌

  1. An element incorporating cracking for reinforced concrete skeletal structures at service load vol.20, pp.9, 2017, https://doi.org/10.1177/1369433216673642
  2. An automated computationally efficient two-stage procedure for service load analysis of RC flexural members considering concrete cracking vol.33, pp.3, 2017, https://doi.org/10.1007/s00366-016-0496-4
  3. Control of Tensile Stress in Prestressed Concrete Members Under Service Loads vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0266-3
  4. Rapid prediction of inelastic bending moments in RC beams considering cracking vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.1113
  5. Neural network based approach for rapid prediction of deflections in RC beams considering cracking vol.19, pp.3, 2016, https://doi.org/10.12989/cac.2017.19.3.293
  6. Explicit expressions for inelastic design quantities in composite frames considering effects of nearby columns and floors vol.64, pp.4, 2016, https://doi.org/10.12989/sem.2017.64.4.437
  7. Application of FE approach to deformation analysis of RC elements under direct tension vol.68, pp.3, 2016, https://doi.org/10.12989/sem.2018.68.3.345
  8. An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams vol.70, pp.6, 2019, https://doi.org/10.12989/sem.2019.70.6.751
  9. Development of a user-friendly and transparent non-linear analysis program for RC walls vol.25, pp.4, 2016, https://doi.org/10.12989/cac.2020.25.4.327
  10. Tensile behaviour of reinforced UHPFRC elements under serviceability conditions vol.54, pp.1, 2016, https://doi.org/10.1617/s11527-021-01630-z