Geomechanics and Engineering

  • 제10권1호
  • /
  • Pages.1-19
  • /
  • 2016
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cyclic behavior of various sands and structural materials interfaces

  • 투고 : 2014.11.03
  • 심사 : 2015.11.02
  • 발행 : 2016.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the results of an intensive experimental investigation on cyclic behavior of various sands and structural materials interface. Comprehensive measurements of the horizontal displacement and shear stresses developed during testing were performed using an automated constant normal load (CNL) cyclic direct shear test apparatus. Two different particle sizes (0.5 mm-0.25 mm and, 2.0 mm-1.0 mm) of sands having distinct shapes (rounded and angular) were tested in a cyclic direct shear testing apparatus at two vertical stress levels (${\sigma}=50kPa$, and 100 kPa) and two rates of displacement ($R_D=2.0mm/min$, and 0.025 mm/min) against various structural materials (i.e., steel, concrete, and wood). The cyclic direct shear tests performed during this investigation indicate that (i) the shear stresses developed during shearing highly depend on both the shape and size of sand grains; (ii) characteristics of the structural materials are closely related to interface response; and (iii) the rate of displacement is slightly effective on the results.

키워드

참고문헌

  1. American Society for Testing and Materials (ASTM) (1994), Designation D 3080-90, 1994, Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions, West Conshohocken, PA, USA.
  2. American Society for Testing and Materials (ASTM) (2010), Designation D 2487, Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), West Conshohocken, PA.
  3. American Society for Testing and Materials (ASTM) (2015), Designation E10-15, Standard Test Method for Brinell Hardness of Metallic Materials.
  4. Brumund, W.F. and Leonards, G.A. (1973), "Experimental study of static and dynamic friction between sand and typical construction materials", J. Test. Eval., 1(2), 162-165. https://doi.org/10.1520/JTE10893J
  5. Bosscher, P.J. and Carlos, O.G. (1987), "Frictional properties between sand and various construction materials", J. Geotech. Eng., 113(9), 1035-1039. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:9(1035)
  6. Cabalar A.F. (2010), "Applications of the triaxial, resonant column and oedometer tests to the study of micaceous sands", Eng. Geol., 112(1-4), 21-28. https://doi.org/10.1016/j.enggeo.2010.01.004
  7. Cabalar, A.F. (2015), "Stress fluctuations in granular material response during cyclic direct shear test", Granular Matter, 17(4), 439-446. https://doi.org/10.1007/s10035-015-0568-y
  8. Cabalar, A.F. and Hasan, R.A. (2013), "Compressional behavior of various size/shape sand-clay mixtures with different pore fluids", Eng. Geol., 164, 36-49. https://doi.org/10.1016/j.enggeo.2013.06.011
  9. Cabalar, A.F. and Mustafa, W.S. (2015), "Fall cone tests on clay-sand mixtures", Eng. Geol., 192, 154-165. https://doi.org/10.1016/j.enggeo.2015.04.009
  10. Cabalar, A.F., Dulundu, K. and Tuncay, K. (2013), "Strength of various sands in triaxial and cyclic direct shear tests", Eng. Geol., 156, 92-102. https://doi.org/10.1016/j.enggeo.2013.01.011
  11. Cernica, J.N. (1995), Geotechnical Engineering: Soil Mechanics, John Wiley & Sons, Inc., United States.
  12. Cho, G.C., Dodds, J.S. and Santamarina, J.C. (2006), "Particle shape effects on packing density, stiffness and strength: Natural and crushed sands", J. Geotech. Geoenviron. Eng., 132(5), 591-602. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:5(591)
  13. Clayton, C.R.I., Abbireddy, C.O.R. and Schiebel, R. (2009), "A method of estimating the form of coarse particulates", Geotechnique, 59(6), 493-501. https://doi.org/10.1680/geot.2007.00195
  14. Clough, G.W. and Duncan, J.M. (1971). "Finite element analyses of retaining wall behavior", J. Soil Mech. Found. Div., 97(12), 1657-1673.
  15. Desai, C.S. and Rigby, D.B. (1997), "Cyclic interface and joint shear device including pore pressure effects", J. Geotech. Geoenviron. Eng., 123(6), 568-579. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:6(568)
  16. Desai, C.S., Drumm, E.C. and Zaman, M.M. (1985), "Cyclic testing and modelling of interfaces", J. Geotech. Eng., ASCE, 111(6), 793-815. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:6(793)
  17. Fakhariani, K. and Evgin, E. (1995), "Simple shear versus direct shear tests on interfacse during cyclic loading", Proceedings of the 3rd International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Volume 1, St. Louis, Missouri, SA, April, pp. 13-16.
  18. Fakharian, K. and Evgin, E. (1996), "An automated apparatus for three dimensional monotonic and cyclic testing of interfaces", Geotech. Testing J., ASTM, 19(1), 22-31. https://doi.org/10.1520/GTJ11404J
  19. Fakharian, K. and Evgin, E. (1997), "Cyclic simple-shear behavior of sand-steel interfaces under constant normal stiffness condition", J. Geotech. Geoenviron. Eng., ASCE, 123(12), 1096-1105. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:12(1096)
  20. Fakhariani, K. and Evgin, E. (2002), "A comprehensive experimental study of sand-steel interfaces subjected to various monotonic and cyclic stress paths", Proceedings of the 12th International Offshore and Polar Engineering Conference (ISOPE-2002), Kyushu, Japan, May.
  21. Gilboy, G. (1928), "The compressibility of sand-mica mixtures", Proceedings of the ASCE, 2, 555-568.
  22. Gomez, J.E., Filz, M.G., Ebeling, R.M. and Dove, J.E. (2009), "Sand-to-concrete interface response to complex load paths in a large displacement shear box", Geotech. Testing J., ASTM, 31(4), 1-12.
  23. Jewell, R.A. and Wroth, C.P. (1987), "Direct shear tests on reinforced sand", Geotechnique, 37(1), 53-68. https://doi.org/10.1680/geot.1987.37.1.53
  24. Kishida, K. and Uesugi, M. (1987), "Tests of the interface between sand and steel in the simple shear apparatus", Geotechnique, 37(1), 45-52. https://doi.org/10.1680/geot.1987.37.1.45
  25. Krumbein, W.C. (1941), "Measurement and geological significance of shape and roundness of sedimentary particles", J. Sediment. Petrol., 11(2), 64-72.
  26. Kulhawy, F. and Peterson, M. (1979), "Behavior of sand-concrete interfaces", Proceedings of the 6th Pan-American Conference on Soil Mechanics and Foundation Engineering, Lima, Peru, December, Volume 2, 225-236.
  27. Lees, G. (1964), "A new method for determining the angularity of particles", Sedimentology, 3(1), 2-21. https://doi.org/10.1111/j.1365-3091.1964.tb00271.x
  28. Lehane, B.M., Jardine, R.J., Bond, A.J. and Frank, R. (1993), "Mechanisms of shaft friction in sand from instrumented pile tests", J. Geotech. Eng., ASCE, 119(1), 19-35. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:1(19)
  29. Mortara, G., Ferrara, D. and Fotia, G. (2010), "Simple model for the cyclic behavior of smooth sand-steel interfaces", J. Geotech. Geoenviron. Eng, ASCE, 136(7), 1004-1009. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000315
  30. Muszynski, M.R. and Stanley, J.V. (2012), "Particle shape estimates of uniform sands: visual and automated methods comparison", J. Mater. Civ. Eng., 24(2), 194-206. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000351
  31. Olson, R.E. and Mesri, G. (1970), "Mechanisms controlling the compressibility of clay", J. Soil Mech. Found. Division, ASCE, 96(6), 1863-1878.
  32. Paikowsky, S.G., Player, C.M. and Connors, P.J. (1995), "A dual interface apparatus for testing unrestricted friction of soil along solid surfaces", Geotech. Testing J., ASTM, 18(2), 168-193. https://doi.org/10.1520/GTJ10320J
  33. Potyondy, J.G. (1961), "Skin friction between various soils and construction materials", Geotechnique, 11(4), 339-353. https://doi.org/10.1680/geot.1961.11.4.339
  34. Powers, M.C. (1953), "A new roundness scale for sedimentary particles", J. Sediment. Petrol., 23(2), 117-119.
  35. Rowe, P.W. (1963), "Passive earth pressure measurements", Geotechnique, 15(1), 57-78.
  36. Santamarina, J.C. and Cho, G.C. (2004), "Soil behavior: The role of particle shape", The Skempton Conference, Thomas Telford, London, UK, March, pp. 604-617.
  37. Shakir, R.R. and Zhu, J. (2009), "Behavior of compacted clay-concrete interface", Front. Archit. Civ. Eng. China, 3(1), 85-92. https://doi.org/10.1007/s11709-009-0013-6
  38. Stark, T.D., Williamson, T.A. and Eid, H.T. (1996), "HDPE geomembrane/geotextile interface shear strength", J. Geotech. Eng., 122(3), 197-203. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:3(197)
  39. Subba Rao, K.S., Aliam, M.M. and Robinson, R.G. (1998), "Interfacial friction between sands and solid surfaces", Proceedings of the Institution of Civil Engineers, (Geotechnical Engineering), April, Volume 131, No. 2, pp. 75-82. https://doi.org/10.1680/igeng.1998.30112
  40. Terzaghi, K. (1925), Erdbaumechanik auf bodenphysikalischer grundlage, Deuticke, Leipzig/Vienna, Austria.
  41. Tsubakihara, Y. and Kishida, H. (1993), "Frictional behavior between normally consolidated clay and steel by two direct shear type apparatuses", Soils Found., 33(2), 1-13. https://doi.org/10.3208/sandf1972.33.2_1
  42. Uesugi, M. and Kishida, H. (1986), "Influential factors of friction between steel and dry sands", Soils Found., 26(2), 29-42.
  43. Uesugi, M. and Kishida, H. (1991), "Discussion of 'Cyclic axial loading of piles in sand' by Harry G. Poulos (June 1989, Vol. 115, No. 6)", J. Geotech. Eng., 117(9), 1435-1437. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:9(1435.2)
  44. Uesugi, M., Kishida, H. and Tsubakihara, Y. (1988), "Behavior of sand particles in sand-steel friction", Soil Found., 28(1), 107-118.
  45. Uesugi, M., Kishida, H. and Tsubakihara, Y. (1989), "Friction between sand and steel under repeated loading", Soils Found., 29(3), 127-137. https://doi.org/10.3208/sandf1972.29.3_127
  46. Wadell, H. (1932), "Volume, shape, and roundness of rock particles", J. Geol., 40(5), 443-451. https://doi.org/10.1086/623964
  47. Youd, T.L. (1973), "Factors controlling maximum and minimum densities of sands", Evaluation of relative density and its role in geotechnical projects involving cohesionless soils, ASTM STP523, West Conshohocken, PA, USA, pp. 98-112.

피인용 문헌

  1. Effect of Particle Size Distribution on Soil-Steel Interface Shear Behavior vol.54, pp.5, 2017, https://doi.org/10.1007/s11204-017-9474-0
  2. Static behavior of a laterally loaded guardrail post in sloping ground by LS-DYNA vol.15, pp.5, 2018, https://doi.org/10.12989/gae.2018.15.5.1101
  3. Cyclic volumetric strain accumulation for sand under drained simple shear condition vol.101, pp.None, 2016, https://doi.org/10.1016/j.apor.2020.102200
  4. The influence of roughness on cyclic and post-cyclic shear behavior of red clay-concrete interface subjected to up to 1000 cycles vol.273, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2020.121718
  5. Cyclic interface behavior of non-water reactive polymer and concrete during dam restoration vol.34, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.08.020