DOI QR코드

DOI QR Code

Research on cold-formed steel connections: A state-of-the-art review

  • Qin, Ying (School of Civil Engineering, Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University) ;
  • Chen, Zhihua (Key Laboratory of Coast Civil Structure Safety of China Ministry of Education, Tianjin University)
  • 투고 : 2014.05.07
  • 심사 : 2015.06.04
  • 발행 : 2016.01.20

초록

Cold-formed steel structures are increasingly attractive due to their benefits of good mechanical performance and constructional advantages. However, this type of construction is still not fully exploited as a result of the acknowledged difficulties involved in forming construction-efficient and cost-effective connections. Furthermore, there is a lack of information on the structural behavior of the cold-formed steel connections. In this study, the research on various cold-formed steel connections was comprehensively reviewed from both fundamental and structural points of view, based on the available experimental and analytical data. It reveals that the current design codes and guidelines for cold-formed steel connections tend to focus more on the individual bearing capacity of the fasteners rather than the overall structural behavior of the connections. Significant future work remains to be conducted on the structural performance of cold-formed steel connection. In addition, extensive previous research has been carried out to propose and evaluate an economical and efficient connection system that is obtained from the conventional connecting techniques used in the hot-rolled industry. These connecting techniques may not be suitable, however, as they have been adopted from hot-rolled steel portal frames due to the thinness of the sheet in cold-formed steels. The review demonstrates that with the increasing demand for cold-formed steel constructions throughout the world, it is crucial to develop an efficient connection system that can be prefabricated and easily assembled on site.

키워드

과제정보

연구 과제 주관 기관 : Chinese Scholarship Council

참고문헌

  1. AISI S100-2012 (2012), North American Specification for the Design of Cold-Formed Steel Structural Members, American Iron and Steel Institute, Washington D.C., USA.
  2. AISI S110-07 (2007), Standard for Seismic Design of Cold-Formed Steel Structural Systems—Special Bolted Moment Frames, American Iron and Steel Institute, Washington D.C., USA.
  3. AS/NZS 4600: 2005 (2005), Australian/New Zealand Standard: Cold-Formed Steel Structures, Jointly published by Standards Australia, Sydney, Australia; Australia and Standards New Zealand, Wellington, New Zealand.
  4. Bajoria, K.M. and Talikoti, R.S. (2006), "Determination of flexibility of beam to column connectors used in thin walled cold formed steel pallet racking systems", Thin-Wall. Struct., 44(3), 372-380. https://doi.org/10.1016/j.tws.2006.01.007
  5. Bambach, M.R. and Rasmussen, K.J.R. (2007), "Behavior of self-drilling screws in light-gauge steel construction", J. Struct. Eng., 133(6), 895-898. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:6(895)
  6. Bernuzzi, C. and Castiglioni, C.A. (2001), "Experimental analysis on the cyclic behaviour of beam-to-column joints in steel storage pallet racks", Thin-Wall. Struct., 39(10), 841-859. https://doi.org/10.1016/S0263-8231(01)00034-9
  7. Bjork, T., Marquis, G., Pellikka, V. and Ilvonen, R. (2006), "An experimental and numerical study of the fracture strength of welded structural hollow section X-joints", J. ASTM Int., 3(6), 1-14.
  8. Bjork, T., Heinila, S. and Marquis, G. (2008), "Assessment of subzero fracture of welded tubular K-joint", J. Struct. Eng., 134(2), 181-188. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(181)
  9. Branston, A.E., Chen, C.Y., Boudreault, F.A. and Rogers, C.A. (2006), "Testing of light-gauge steel-frame-wood structural panel shear walls", Can. J. Civil Eng., 33(5), 561-572. https://doi.org/10.1139/l06-014
  10. Bruhl, F., Kuhlmanna, U. and Jorissen, A. (2011), "Consideration of plasticity within the design of timber structures due to connection ductility", Eng. Struct., 33(11), 3007-3017. https://doi.org/10.1016/j.engstruct.2011.08.013
  11. BS EN 1993-1-3: 2006 (2006), Eurocode 3: Design of Steel Structures-Part 1.8: General Rules-Supplementary Rules for Cold-Formed Members and Sheeting, British Standards Institution, London, UK.
  12. Chen, J. and Young, B. (2007), "Cold-formed steel lipped channel columns at elevated temperatures", Eng. Struct., 29(10), 2445-2456. https://doi.org/10.1016/j.engstruct.2006.12.004
  13. Chong, K.P. and Matlock, R.B. (1975), "Light-gage steel bolted connections without washers", J. Struct. Div., 101(ST7), 1381-1391.
  14. Chung, K.F. and Ho, H.C. (2005), "Analysis and design of lapped connections between cold-formed steel Z sections", Thin-Wall. Struct., 43(7), 1071-1090. https://doi.org/10.1016/j.tws.2004.11.005
  15. Chung, K.F. and Ip, K.H. (2000), "Finite element modeling of bolted connections between cold-formed steel strips and hot rolled steel plates under static shear loading", Eng. Struct., 22(10), 1271-1284. https://doi.org/10.1016/S0141-0296(99)00082-6
  16. Chung, K.F. and Ip, K.H. (2001), "Finite element investigation on the structural behaviour of cold-formed steel bolted connections", Eng. Struct., 23(9), 1115-1125. https://doi.org/10.1016/S0141-0296(01)00006-2
  17. Chung, K.F. and Lau, L. (1999), "Experimental investigation on bolted moment connection among cold formed steel members", Eng. Struct., 21(10), 898-911. https://doi.org/10.1016/S0141-0296(98)00043-1
  18. Chung, K.F. and Lawson, R.M. (2000), "Structural performance of shear resisting connections among cold-formed steel members using web cleats of cold-formed steel strips", Eng. Struct., 22(10), 1350-1366. https://doi.org/10.1016/S0141-0296(99)00083-8
  19. Chung, K.F. and Shi, Y.J. (1998), "Lateral torsional buckling of gusset plates in bolted moment connections among cold-formed steel members", J. Constr. Steel Res., 46(1-3), 196-197. https://doi.org/10.1016/S0143-974X(98)80018-7
  20. Chung, K.F., Yu, W.K. and Wang, A.J. (2005), "Structural performance of cold-formed steel column bases with bolted moment connections", Steel Compos. Struct., Int. J., 5(4), 289-304. https://doi.org/10.12989/scs.2005.5.4.289
  21. Dawe, J.L. and Wood, J.V. (2006), "Small-scale test behavior of cold-formed steel roof trusses", J.Struct. Eng., 132(4), 608-615. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(608)
  22. Della Corte, G., Fiorino, I. and Landolfo, R. (2006), "Seismic behaviour of sheathed cold-formed structures: physical tests", J. Struct. Eng., 132(4), 570-581. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(570)
  23. Dhalla, A.K., Errera, S.J. and Winter, G. (1971), "Connection in thin low-ductility steels", J. Struct. Div., 97(10), 2549-2566.
  24. Drysdale, T.G. and Breton, N. (1991), Strength and Stiffness Characteristics of Steel Stud Backup Walls Designed to Support Brick Veneer, Part 1 of the Mcmaster University Laboratory Test Program on Brick Veneer/Steel Stud Wall Systems; Mcmaster University, ON, Canada.
  25. Dubina, D. and Ungureanu, V. (2010), "Behaviour of multi-span cold-formed Z-purlins with bolted lapped connections", Thin-Wall. Struct., 48(10-11), 866-871. https://doi.org/10.1016/j.tws.2010.04.003
  26. Dubina, D. and Zaharia, R. (1997), "Cold-formed steel trusses with semi-rigid joints", Thin-Wall. Struct., 29(1-4), 273-287. https://doi.org/10.1016/S0263-8231(97)00028-1
  27. Dundu, M. and Kemp, A.R. (2006a), "Plastic and lateral-torsional buckling behavior of single cold-formed channels connected back-to-back", J. Struct. Eng., 132(8), 1223-1233. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:8(1223)
  28. Dundu, M. and Kemp, A.R. (2006b), "Strength requirements of single cold-formed channels connected back-to-back", J. Constr. Steel Res., 62(3), 250-261. https://doi.org/10.1016/j.jcsr.2005.07.006
  29. Fan, L.X., Rondal, J. and Cescotto, S. (1997a), "Numerical simulation of lap screw connections", Thin Wall Struct., 29(1-4), 235-241. https://doi.org/10.1016/S0263-8231(97)00025-6
  30. Fan, L.X., Rondal, J. and Cescotto, S. (1997b), "Finite element modeling of single lap screw connections in steel sheeting under static shear", Thin-Wall. Struct., 27(2), 165-185. https://doi.org/10.1016/S0263-8231(96)00037-7
  31. Feng, R. and Young, B. (2008), "Experimental investigation of cold-formed stainless steel tubular T-joints", Thin-Wall. Struct., 46(10), 1129-1142. https://doi.org/10.1016/j.tws.2008.01.008
  32. Fiorino, I., Della Corte, G. and Landolfo, R. (2007), "Experimental tests on typical screw connections for cold-formed steel housing", Eng. Struct., 29(8), 1761-1773. https://doi.org/10.1016/j.engstruct.2006.09.006
  33. Fox, S.R. and Schuster, R.M. (2000), "Lateral strength of wind load bearing wall stud-to-track connection", Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, October.
  34. Fragiacomo, M., Dujic, B. and Sustersic, I. (2011), "Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions", Eng. Struct., 33(11), 3043-3053. https://doi.org/10.1016/j.engstruct.2011.05.020
  35. Fulop, L.A. and Dubina, D. (2004), "Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading. Part I: Experimental research", Thin-Wall. Struct., 42(2), 321-338. https://doi.org/10.1016/S0263-8231(03)00063-6
  36. Fulop, L.A. and Dubina, D. (2006), "Design criteria for seam and sheeting-to-framing connections of cold-formed steel shear panels", J. Struct. Eng., 132(4), 582-590. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(582)
  37. Gad, E.F. (1997), "Performance of brick-veneer steel-framed domestic structures under earthquake loading", Ph.D. Dissertation, University of Melbourne, Victoria, Australia.
  38. Ghosn, A. (2002), "Deflection of nested cold-formed steel Z-section beams", J. Struct. Eng., 128(11), 1423-1428. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:11(1423)
  39. Ghosn, A. and Sinno, R. (1995), "Governing stresses in Z-purlin lap joints", J. Struct. Eng., 121(12), 1735-1741. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1735)
  40. Gilbert, B.P. and Rasmussen, K.J.R. (2010), "Bolted moment connections in drive-in and drive-through steel storage racks", J. Constr. Steel Res., 66(6), 755-766. https://doi.org/10.1016/j.jcsr.2010.01.013
  41. Gilchrist, R.T. and Chong, K.P. (1979), "Thin light-gage bolted connection without washers", J. Struct. Div., 105(ST1), 175-183.
  42. Gutierrez, R., Loureiro, A., Lopez, M. and Moreno, A. (2011), "Analysis of cold-formed purlins with slotted sleeve connections", Thin-Wall. Struct., 49(7): 833-841. https://doi.org/10.1016/j.tws.2011.02.008
  43. Hancock, G.J. (1997), "Light gauge construction", Progr. Struct. Eng. Mater., 1(1), 25-30. https://doi.org/10.1002/pse.2260010107
  44. Ho, H.C. and Chung, K.F. (2004), "Experimental investigation into the structural behaviour of lapped connections between cold-formed steel Z sections", Thin-Wall. Struct., 42(7), 1013-1033. https://doi.org/10.1016/j.tws.2004.03.022
  45. Ho, H.C. and Chung, K.F. (2006a), "Analytical prediction on deformation characteristics of lapped connections between cold-formed steel Z sections", Thin-Wall. Struct., 44(1), 115-130. https://doi.org/10.1016/j.tws.2005.08.009
  46. Ho, H.C. and Chung, K.F. (2006b), "Structural behavior of lapped cold-formed steel Z sections with generic bolted configurations", Thin-Wall. Struct., 44(4), 466-480. https://doi.org/10.1016/j.tws.2006.03.012
  47. Jorissen, A. and Fragiacomo, M. (2011), "General notes on ductility in timber structures", Eng. Struct., 33(11), 2987-2997. https://doi.org/10.1016/j.engstruct.2011.07.024
  48. Kim, T.S. and Han, B.S. (2007), "Numerical simulation and effect of curling on bolted connections in cold-formed stainless steel", ISIJ Int., 47(6), 920-929. https://doi.org/10.2355/isijinternational.47.920
  49. Kim, T.S., Kuwamura, H. and Cho, T. (2008a), "Prediction of ultimate behaviors in cold-formed steel bolted connection by the introduction of initial geometric imperfection in FE modeling", ISIJ Int., 48(5), 671-680. https://doi.org/10.2355/isijinternational.48.671
  50. Kim, T.S., Kuwamura, H. and Cho, T.J. (2008b), "A parametric study on ultimate strength of single shear bolted connections with curling", Thin-Wall. Struct., 46(1), 38-53. https://doi.org/10.1016/j.tws.2007.08.009
  51. Kim, T., Jeong, H. and Cho, T. (2011), "The finite element analysis of the ultimate behavior of thin-walled carbon steel bolted connections", J. Constr. Steel Res., 67(7), 1086-1095. https://doi.org/10.1016/j.jcsr.2011.01.004
  52. Kirk, P. (1986), "Design of a cold formed section portal frame building system", Proceedings of the 8th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, November.
  53. Kwon, Y.B., Chung, H.S. and Kim, G.D. (2006), "Experiments of cold-formed steel connections and portal frames", J. Struct. Eng., 132(4), 600-607. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(600)
  54. LaBoube, R.A. and Yu, W.W. (1996), "Additional design considerations for bolted connections", Proceedings of the 13th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, October.
  55. LaBoube, R.A. and Sokol, M.A. (2002), "Behavior of screw connections in residential construction", J. Struct. Eng., 128(1), 115-118. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(115)
  56. Landolfo, R., Mammana, O., Portioli, F., Di Lorenzo, G. and Guerrieri, M.R. (2007), "Experimental investigation on laser welded connections for built-up cold-formed steel beams", J. Constr. Steel Res., 65(1), 196-208. https://doi.org/10.1016/j.jcsr.2008.03.015
  57. Lennon, R., Pedreschi, R. and Sinha, B.P. (1999), "Comparative study of some mechanical connections in cold formed steel", Constr. Build. Mater., 13(3), 109-116. https://doi.org/10.1016/S0950-0618(99)00018-5
  58. Lewis, G.M. (1991), "Stability of rack structures", Thin-Wall. Struct., 12(2), 163-174. https://doi.org/10.1016/0263-8231(91)90062-N
  59. Lewis, A.V. (2008), "Strength of cold-formed steel jamb stud-to-track connections", Master Thesis, University of Waterloo, ON, Canada.
  60. Lim, J.B.P. and Nethercot, D.A. (2002), "F.E.-assisted design of the eaves bracket of a cold-formed steel portal frame", Steel Compos. Struct., Int. J., 2(6), 411-428. https://doi.org/10.12989/scs.2002.2.6.411
  61. Lim, J.B.P. and Nethercot, D.A. (2003a), "Ultimate strength of bolted moment-connections between cold-formed steel members", Thin-Wall. Struct., 41(11), 1019-1039. https://doi.org/10.1016/S0263-8231(03)00045-4
  62. Lim, J.B.P. and Nethercot, D.A. (2003b), "Serviceability design of a cold-formed steel portal frame having semi-rigid joints", Steel Compos. Struct., Int. J., 3(6), 451-474. https://doi.org/10.12989/scs.2003.3.6.451
  63. Lim, J.B.P. and Nethercot, D.A. (2004a), "Stiffness prediction for bolted moment-connections between cold-formed steel members", J. Constr. Steel Res., 60(1), 85-107. https://doi.org/10.1016/S0143-974X(03)00105-6
  64. Lim, J.B.P. and Nethercot, D.A. (2004b), "Finite element idealization of a cold-formed steel portal frame", J. Struct. Eng., 130(1), 78-94. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(78)
  65. Lim, J.B.P. and Young, B. (2007), "Effects of elevated temperatures on bolted moment-connections between cold-formed steel members", Eng. Struct., 29(10), 2419-2427. https://doi.org/10.1016/j.engstruct.2006.11.027
  66. Lim, J.S., Kim, T.S. and Kim, S.H. (2013), "Ultimate strength of single shear bolted connections with cold-formed ferritic stainless steel", J. Zhejiang Univ.-Sc. A, 14(2), 120-136. https://doi.org/10.1631/jzus.A1100316
  67. Lu, W., Makelainen, P., Outinen, J. and Ma, Z. (2011), "Design of screwed steel sheeting connection at ambient and elevated temperatures", Thin-Wall. Struct., 49(12), 1526-1533. https://doi.org/10.1016/j.tws.2011.07.014
  68. Mahaarachchi, D. and Mahendran, M. (2009), "A strain criterion for pull-through failures in crest-fixed steel claddings", Eng. Struct., 31(2), 498-506. https://doi.org/10.1016/j.engstruct.2008.09.013
  69. Mahendran, M. and Mahaarachchi, D. (2002), "Cyclic pull-out strength of screwed connections in steel roof and wall cladding systems using thin steel battens", J. Struct. Eng., 128(6), 771-778. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:6(771)
  70. Maiola, C.H., Malite, M., Goncalves, R.M. and Neto, J.M. (2002), "Structural behaviour of bolted connections in cold-formed steel members, emphasizing the shear lag effect", Proceedings of the 13th International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL, USA, October.
  71. Makelainen, P. and Kesti, J. (1999), "Advanced method for lightweight steel joining", J. Constr. Steel Res., 49(2), 107-116. https://doi.org/10.1016/S0143-974X(98)00210-7
  72. Mashiri, F.R., Zhao, X.L. and Grundy, P. (2000), "Crack propagation analysis of welded thin-walled joints using boundary element method", Computat. Mech., 26(2), 157-165. https://doi.org/10.1007/s004660000163
  73. Mashiri, F.R., Zhao, X.L. and Grundy, P. (2002), "Fatigue tests and design of welded T connections in thin cold-formed square hollow sections under in-plane bending", J. Struct. Eng., 128(11), 1413-1422. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:11(1413)
  74. Mashiri, F.R. and Zhao, X.L. (2004), "Plastic mechanism analysis of welded thin-walled T-joints made up of circular braces and square chords under in-plane bending", Thin-Wall. Struct., 42(5), 759-783. https://doi.org/10.1016/j.tws.2003.12.010
  75. Miller, T. and Pekoz, T. (1994), "Behavior of gypsum-sheathed cold-formed steel wall studs", J. Struct. Eng., 120(5), 1644-1650. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:5(1644)
  76. Mills, J. (2000), "Knee joints in cold-formed channel portal frames", Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, October.
  77. Mills, J. and LaBoube, R. (2004), "Self-drilling screw joints for cold-formed channel portal frames", J. Struct. Eng., 130(11), 1799-1806. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1799)
  78. Moore, D.B. (1990), "Moment-rotation characteristics of purlin connections", Proceedings of the 10th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, October.
  79. Nithyadharan, M. and Kalyanaraman, V. (2011), "Experimental study of screw connections in CFS-calcium silicate board wall panels", Thin-Wall. Struct., 49(6), 724-731. https://doi.org/10.1016/j.tws.2011.01.004
  80. Pan, C.L. (2004), "Prediction of the strength of bolted cold-formed channel sections in tension", Thin-Wall. Struct., 42(8), 1177-1198. https://doi.org/10.1016/j.tws.2004.02.001
  81. Paula, V.F., Bezerra, L.M. and Matias, W.T. (2008), "Efficiency reduction due to shear lag on bolted cold-formed steel angles", J. Constr. Steel Res., 64(1), 571-583. https://doi.org/10.1016/j.jcsr.2007.10.008
  82. Pedreschi, R.F. and Sinha, B.P. (1996), "The potential of press-joining in cold-formed steel structures", Constr. Build. Mater., 10(4), 243-250. https://doi.org/10.1016/0950-0618(96)00006-2
  83. Pedreschi, R.F., Sinha, B.P. and Davies, R. (1997), "Advanced connection techniques for cold-formed steel structures", J. Struct. Eng., 123(2), 138-144. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:2(138)
  84. Pekoz, T. (1990), "Design of cold-formed steel screw connections", Proceedings of the 10th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, October.
  85. Prabha, P., Marimuthu, V., Saravanan, M. and Jayachandran, A.S. (2010), "Evaluation of connection flexibility in cold formed steel racks", J. Constr. Steel Res., 66(7), 863-872. https://doi.org/10.1016/j.jcsr.2010.01.019
  86. Prabha, P., Jayachandran, S.A., Saravanan, M. and Marimuthu, V. (2011), "Prediction of the tensile capacity of cold-formed angles experiencing shear lag", Thin-Wall. Struct., 49(1), 1348-1358. https://doi.org/10.1016/j.tws.2011.06.003
  87. Qin, Y., Chen, Z., Yang, Q. and Shang, K. (2014a), "Experimental seismic behavior of through-diaphragm connections to concrete-filled rectangular steel tubular columns", J. Constr. Steel Res., 93, 32-43. https://doi.org/10.1016/j.jcsr.2013.10.020
  88. Qin, Y., Chen, Z. and Wang, X. (2014b), "Experimental investigation of new internal-diaphragm connections to CFT columns under cyclic loading", J. Constr. Steel Res., 98, 35-44. https://doi.org/10.1016/j.jcsr.2014.02.014
  89. Qin, Y., Chen, Z. and Wang, X. (2014c), "Elastoplastic behavior of through-diaphragm connections to concrete-filled rectangular steel tubular columns", J. Constr. Steel Res., 93, 88-96. https://doi.org/10.1016/j.jcsr.2013.10.011
  90. Qin, Y., Chen, Z. and Rong, B. (2014d), "Component-based mechanical models for axially-loaded through-diaphragm connections to concrete-filled RHS columns", J. Constr. Steel Res., 102, 150-163. DOI: http://dx.doi.org/10.1016/j.jcsr.2014.06.016
  91. Qin, Y., Chen, Z., Wang, X. and Zhou, T. (2014e), "Seismic behavior of through-diaphragm connections between CFRT columns and steel beams-experimental study", Adv. Steel Constr., 10(3), 351-371.
  92. Qin, Y., Chen, Z. and Han, N. (2014f), "Research on design of through-diaphragm connections between CFRT columns and HSS beams", Int. J. Steel Struct., 14(3), 1-12. https://doi.org/10.1007/s13296-014-1001-9
  93. Qin, Y., Chen, Z., Bai, J., Li, Z. and Yang, Y. (2016), "Test of extended thick-walled through-diaphragm connection to thick-walled CFT column", Steel Compos. Struct., Int. J., 20(1), 1-20. https://doi.org/10.12989/scs.2016.20.1.001
  94. Rogers, C.A. and Hancock, G.J. (1998), "Bolted connection tests of thin G550 and G300 sheet steels", J. Struct. Eng., 124(7), 798-808. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(798)
  95. Rogers, C.A. and Hancock, G.J. (1999a), "Bolted connection design for sheet steels less than 1.0 mm thick", J. Constr. Steel Res., 51(2), 123-146. https://doi.org/10.1016/S0143-974X(99)00018-8
  96. Rogers, C.A. and Hancock, G.J. (1999b), "Screwed connection tests of thin G550 and G300 sheet steels", J. Struct. Eng., 125(2), 128-136. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(128)
  97. Rogers, C.A. and Hancock, G.J. (2000), "Failure modes of bolted-sheet-steel connections loaded in shear", J. Struct. Eng., 126(3), 288-295. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(288)
  98. Sabbagh, A.B., Mirghaderi, R., Petkovski, M. and Pilakoutas, K. (2010), "An integrated thin-walled steel skeleton structure (two full scale tests)", J. Constr. Steel Res., 66(3), 470-479. https://doi.org/10.1016/j.jcsr.2009.10.007
  99. Sabbagh, A.B., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2011), "Ductile moment-resisting frames using cold-formed steel sections: an analytical investigation", J. Constr. Steel Res., 67(4), 634-646. https://doi.org/10.1016/j.jcsr.2010.11.016
  100. Sabbagh, A.B., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2012a), "Experimental work on cold-formed steel elements for earthquake resilient moment frame buildings", Eng. Struct., 42, 371-386. https://doi.org/10.1016/j.engstruct.2012.04.025
  101. Sabbagh, A.B., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2012b), "Development of coldformed steel elements for earthquake resistant moment frame buildings", Thin-Wall. Struct., 53, 99-108. https://doi.org/10.1016/j.tws.2012.01.004
  102. Sabbagh, A.B., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2013), "Cyclic behaviour of bolted cold-formed steel moment connections: FE modelling including slip", J. Constr. Steel Res., 80, 100-108. https://doi.org/10.1016/j.jcsr.2012.09.010
  103. Salih, E.L., Gardner, L. and Nethercot, D.A. (2013), "Numerical study of stainless steel gusset plate connections", Eng. Struct., 49, 448-464. https://doi.org/10.1016/j.engstruct.2012.11.032
  104. Sato, A. and Uang, C.M. (2009), "Seismic design procedure development for cold-formed steel-special bolted moment frames", J. Constr. Steel Res., 65(4), 860-868. https://doi.org/10.1016/j.jcsr.2008.03.016
  105. Sato, A. and Uang, C.M. (2010), "Seismic performance factors for cold-formed steel special bolted moment frames", J. Struct. Eng., 136(8), 961-967. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000191
  106. Serrette, R. and Peyton, D. (2009), "Strength of screw connections in cold-formed steel connection", J. Struct. Eng., 135(8), 951-958. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:8(951)
  107. Serrette, R.L., Encalada, J., Juadines, M. and Nquyen, H. (1997), "Static racking behaviour of plywood, OSB, gypsum and fiberbond walls with metal framing", J. Struct. Eng., 123(8), 1079-1086. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:8(1079)
  108. Shen, J. and Astaneh-Asl, A. (1999), "Hysteretic behavior of bolted-angle connections", J. Constr. Steel Res., 51(3), 201-218. https://doi.org/10.1016/S0143-974X(99)00030-9
  109. Swanson, J.A. and Leon, R.T. (2000), "Bolted steel connections: tests on T-stub components", J. Struct. Eng., 126(1), 50-56. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:1(50)
  110. Teh, L.H. and Hancock, G.J. (2005), "Strength of welded connections in G450 sheet steel", J. Struct. Eng., 131(10), 1561-1569. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:10(1561)
  111. Teh, L.H. and Rasmussen, K.J.R. (2007), "Strength of arc-welded T-joints between equal width cold-formed RHS", J. Constr. Steel Res., 63(4), 571-579. https://doi.org/10.1016/j.jcsr.2006.06.021
  112. Teh, L.H. and Gilbert, B.P. (2012), "Net section tension capacity of bolted connections in cold-redued steel sheets", J. Struct. Eng., 138(3), 337-344. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000477
  113. Teh, L.H. and Gilbert, B.P. (2013a), "Net section tension capacity of cold-reduced sheet steel channel braces bolted at the web", J. Struct. Eng., 139(5), 740-747. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000650
  114. Teh, L.H. and Gilbert, B.P. (2013b), "Net section tension capacity of cold-reduced sheet steel angle braces bolted at one leg", J. Struct. Eng., 139(3), 328-337. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000675
  115. Teh, L.H. and Yazici, V. (2013), "Shear lag and eccentricity effects of bolted connections in cold-formed steel sections", Eng. Struct., 52, 536-544. https://doi.org/10.1016/j.engstruct.2013.03.024
  116. Toma, A., Sedlacek, G. and Weynand, K. (1993), "Connections in cold-formed steel", Thin-Wall. Struct., 16(1-4), 219-237. https://doi.org/10.1016/0263-8231(93)90046-D
  117. Uang, C.M., Sato, A., Hong, J.K. and Wood, K. (2010), "Cyclic testing and modeling of cold-formed steel special bolted moment frame connections", J. Struct. Eng., 136(8), 953-960. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000190
  118. Valencia-Clement, G.F. (2009), "Qualification of beam to column connections of cold formed steel shapes", Proccedings of the 6th International Conference on Behaviour of Steel Structures in Seismic Areas, Philadelphia, PA, USA, August.
  119. Wallace, J.A. and Schuster, R.M. (2002), "Testing of bolted cold-formed steel connections in bearing (with and without washers)", Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL, USA, October.
  120. Wallace, J.A., LaBoube, R. and Schuster, R.M. (2001a), "Calibrations of bolted cold-formed steel connections in bearing (with and without washers)", AISI Report RP01-5, Washington D.C., USA.
  121. Wallace, J.A., Schuster, R.M. and LaBoube, R. (2001b), "Testing of bolted cold-formed steel connections in bearing (with and without washers)", AISI Report RP01-4, Washington DC, USA.
  122. Wilkinson, T. and Hancock, G.J. (2000), "Tests to examine plastic behavior of knee joints in cold-formed RHS", J. Struct. Eng., 126(3), 297-305. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(297)
  123. Winter, G. (1956a), "Tests on bolted connections in light gage steel", J. Struct. Div., 82(ST2), 513-528.
  124. Winter, G. (1956b), Light gage steel connections with high-strength, high-torqued bolts, International Association for Bridge and Structural Engineering, USA.
  125. Wong, M.F. and Chung, K.F. (2002), "Structural behavior of bolted moment connections in cold-formed steel beam-column sub-frames", J. Constr. Steel Res., 58(2), 253-274. https://doi.org/10.1016/S0143-974X(01)00044-X
  126. Yan, S. and Young, B. (2012), "Screwed connections of thin sheet steels at elevated temperatures - Part I: Steady state tests", Eng. Struct., 35, 234-243. https://doi.org/10.1016/j.engstruct.2011.10.030
  127. Yang, J. and Liu, Q. (2012), "Sleeve connections of cold-formed steel sigma purlins", Eng. Struct., 43, 245-258. https://doi.org/10.1016/j.engstruct.2012.05.021
  128. Yu, W.W. (1982), "AISI design criteria for bolted connections", Proceedings of the 6th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, November.
  129. Yu, W.W. (2000), Cold-Formed Steel Design, (3rd edition), John Wiley and Sons, Inc., New York, NY, USA.
  130. Yu, C. (2010), "Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathing", Eng. Struct., 32(6), 1522-1529. https://doi.org/10.1016/j.engstruct.2010.01.029
  131. Yu, C. and Panyanouvong, M.X. (2013), "Bearing strength of cold-formed steel bolted connections with a gap", Thin-Wall. Struct., 67, 110-115. https://doi.org/10.1016/j.tws.2013.01.015
  132. Yu, C. and Xu, K. (2013), "Shear strength of a cold-formed steel sheet in bolted connections using oversized holes", J. Struct. Eng., 139(5), 860-864. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000561
  133. Yu, W.K., Chung, K.F. and Wong, M.F. (2005), "Analysis of bolted moment connections in cold-formed steel beam-column sub-frames", J. Constr. Steel Res., 61(9), 1332-1352. https://doi.org/10.1016/j.jcsr.2005.03.001
  134. Yu, C., Xu, K. and Sheerah, I. (2011), "Bearing strength of cold-formed steel bolted connections using oversized holes without washers", J. Struct. Eng., 137(1), 156-159. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000270
  135. Zadanfarrokh, F. and Bryan, E.R. (1992), "Testing and design of bolted connections in cold formed steel sections", Proceedings of the 11th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, USA, October.
  136. Zhang, L. and Tong, G. (2008), "Moment resistance and flexural rigidity of lapped connections in multi-span cold-formed Z purlin systems", Thin-Wall. Struct., 46(5), 551-560. https://doi.org/10.1016/j.tws.2007.10.010
  137. Zhao, X.L. (2000), "Deformation limit and ultimate strength of welded T-joints in cold-formed RHS sections", J. Constr. Steel Res., 53(2), 149-165. https://doi.org/10.1016/S0143-974X(99)00063-2

피인용 문헌

  1. Test of extended thick-walled through-diaphragm connection to thick-walled CFT column vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.001
  2. Strain measurements and analyses around the bolt holes of structural steel plate connections using full-field measurements vol.131, 2017, https://doi.org/10.1016/j.engstruct.2016.11.033
  3. Seismic Failure Mechanism of Reinforced Cold-Formed Steel Shear Wall System Based on Structural Vulnerability Analysis vol.7, pp.3, 2017, https://doi.org/10.3390/app7020182
  4. 00.02: Developments in research and assessment of steel structures: Highlights from the perspective of an American researcher vol.1, pp.2-3, 2017, https://doi.org/10.1002/cepa.42
  5. Study on the bearing capacity of cold-formed steel under different boundary conditions in transmission towers vol.12, pp.6, 2016, https://doi.org/10.12989/eas.2017.12.6.665
  6. Reliability analysis of the nonlinear behaviour of stainless steel cover-plate joints vol.25, pp.1, 2017, https://doi.org/10.12989/scs.2017.25.1.045
  7. Strength and stiffness of cold-formed steel portal frame joints using quasi-static finite element analysis vol.25, pp.6, 2016, https://doi.org/10.12989/scs.2017.25.6.727
  8. Structural behavior of the stiffened double-skin profiled composite walls under compression vol.31, pp.1, 2019, https://doi.org/10.12989/scs.2019.31.1.001