Smart Structures and Systems

  • 제17권1호
  • /
  • Pages.123-134
  • /
  • 2016
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Electro-mechanical impedance based monitoring for the setting of cement paste using piezoelectricity sensor

  • Lee, Jun Cheol (School of Architecture and Civil Engineering, Kyungpook National University) ;
  • Shin, Sung Woo (Department of Safety and Engineering, Pukyong National University) ;
  • Kim, Wha Jung (School of Architecture and Civil Engineering, Kyungpook National University) ;
  • Lee, Chang Joon (Department of Architectural Engineering, Chungbuk National University)
  • 투고 : 2015.01.20
  • 심사 : 2015.09.06
  • 발행 : 2016.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

The evolution of the electro-mechanical impedance (EMI) of a piezoelectricity (PZT) sensor was investigated to determine the setting times of cement paste in this study. The PZT sensor coated with non-conductive acrylic resin was embedded in fresh cement paste and the EMI signatures were continuously monitored. Vicat needle test and semi-adiabatic calorimetry test were also conducted to validate the EMI sensing technique. Significant changes in the EMI resonance peak magnitude and frequency during the setting period were observed and the setting times determined by EMI sensing technique were relevant to those measured by Vicat needle test and semi-adiabatic calorimetry test.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea(NRF)

참고문헌

  1. Abel, J.D. and Hover, K.C. (2000), "Field study of the setting behavior of fresh concrete, cement", Cement Concrete Aggr., 22(2), 95-102. https://doi.org/10.1520/CCA10469J
  2. ASTM C150/C150M-12 (2012), Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA.
  3. ASTM C191-13 (2013), Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International, West Conshohocken, PA.
  4. ASTM C305-14 (2014), Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM International, West Conshohocken, PA.
  5. Carino, S.J. (1995), The use of temperature as an indicator of setting time of mortar specimens, Undergraduate Research Project, Cornell University, Ithaca, NY.
  6. Christensen, B.J. (2006), Time of setting-Significance of tests and properties of concrete and concrete making materials, ASTM International, West Conshohocken, PA, USA.
  7. Chung, C.W., Suraneni, P., Popovics, J.S. and Struble, L.J. (2012), "Setting time measurement using ultrasonic wave reflection", ACI Mater. J., 109(1), 109-118.
  8. Crawley, E.F. and De Luis, J. (1987), "Use of piezoelectric actuators as elements of intelligent structures", AIAA J., 25(10), 1373-1385. https://doi.org/10.2514/3.9792
  9. Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electro-mechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer", J. Intel. Mat. Syst. Str., 5(1), 12-20. https://doi.org/10.1177/1045389X9400500102
  10. Mindess, S., Young, J.F. and Darwin, D. (2003), Concrete, Prentice Hall, Upper Saddle River, NJ, USA.
  11. Neville, A.M. (1996), Properties of Concrete, Prentice Hall, New York, NY, USA.
  12. Pinto, R.C.A. and Hover, K.C. (1999), "Application of maturityapproach to setting times", ACI Mater. J., 96(6), 686-691.
  13. Shin, S.W. and Oh, T. (2009), "Application of electro-mechanical impedance sensing technique for online monitoring strength development in concrete using smart PZT patches", Constr. Build. Mater., 23(2), 1185-1188. https://doi.org/10.1016/j.conbuildmat.2008.02.017
  14. Shin, S.W., Qureshi A.R., Lee, J.Y. and Yun, C.B. (2008), "Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete", Smart Materials and Structures, 17(5), 1-8.
  15. Struble, L.J. and Lei, W.G. (1995), "Rheological changes associated with setting of cement paste", Adv. Cement Based Materials J., 2(6),224-230. https://doi.org/10.1016/1065-7355(95)90041-1
  16. Tawie, R. and Lee, H.K. (2010), "Monitoring the strength development in concrete by EMI sensing technique", Constr. Build. Mater., 24(9), 1746-1753. https://doi.org/10.1016/j.conbuildmat.2010.02.014
  17. Trtnik, G., Valic, M.I. and Turk, G. (2013), "Measurement of setting process of cement pastes using non-destructive ultrasonic shear wave reflection technique", NDT & E Int., 56, 65-75. https://doi.org/10.1016/j.ndteint.2013.02.004
  18. Wang, D. and Zhu, H. (2011), "Monitoring of the strength gain of concrete using embedded PZT impedance", Constr. Build. Mater., 25(9), 3703-3708. https://doi.org/10.1016/j.conbuildmat.2011.04.020
  19. Yim, H.J., Kim, J.H. and Shah, S.P. (2014), "Ultrasonic monitoring of the setting of cement-based materials: Frequency dependence", Constr. Build. Mater., 65, 518-525. https://doi.org/10.1016/j.conbuildmat.2014.04.128

피인용 문헌

  1. A size-dependent micropolar-piezoelectric layered structure for the analysis of love wave pp.1745-5049, 2018, https://doi.org/10.1080/17455030.2018.1542186
  2. Measurement of Unit Weight of Dry Sand Using Piezoelectric Sensor vol.8, pp.11, 2018, https://doi.org/10.3390/app8112277
  3. Crack detection in rectangular plate by electromechanical impedance method: modeling and experiment vol.19, pp.4, 2016, https://doi.org/10.12989/sss.2017.19.4.361
  4. 전기-역학적 임피던스를 이용한 모래의 단위중량 및 강도 평가 vol.34, pp.2, 2016, https://doi.org/10.7843/kgs.2018.34.2.33
  5. Design and evaluation of an experimental system for monitoring the mechanical response of piezoelectric energy harvesters vol.22, pp.2, 2018, https://doi.org/10.12989/sss.2018.22.2.133
  6. Portland cement structure and its major oxides and fineness vol.22, pp.4, 2016, https://doi.org/10.12989/sss.2018.22.4.425