Smart Structures and Systems

  • 제17권1호
  • /
  • Pages.45-58
  • /
  • 2016
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of freezing and thawing damage of concrete using a nonlinear ultrasonic method

  • Yim, Hong Jae (Department of Construction and Disaster Prevention Engineering, Kyungpook National University) ;
  • Park, Sun-Jong (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Kim, Jae Hong (School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology) ;
  • Kwak, Hyo-Gyong (Department of Civil Engineering, Korean Advanced Institute for Science and Technology)
  • 투고 : 2014.01.28
  • 심사 : 2014.09.29
  • 발행 : 2016.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Freezing and thawing cycles induce deterioration and strength degradation of concrete structures. This study presumes that a large quantity of contact-type defects develop due to the freezing and thawing cycles of concrete and evaluates the degree of defects based on a nonlinearity parameter. The nonlinearity parameter was obtained by an impact-modulation technique, one of the nonlinear ultrasonic methods. It is then used as an indicator of the degree of contact-type defects. Five types of damaged samples were fabricated according to different freezing and thawing cycles, and the occurrence of opening or cracks on a micro-scale was visually verified via scanning electron microscopy. Dynamic modulus and wave velocity were also measured for a sensitivity comparison with the obtained nonlinearity parameter. The possibility of evaluating strength degradation was also investigated based on a simple correlation of the experimental results.

키워드

과제정보

연구 과제 주관 기관 : Korea Agency for Infrastructure Technology Advancement(KAIA)

참고문헌

  1. ACI Committee 228 (1998), Nondestructive Test Methods for Evaluation of Concrete in Structures, America Concrete Institute, Farmington Hills, MI, USA.
  2. Antonets, V., Donskoy, D. and Sutin, A. (1986), "Nonlinear vibro-diagnostics of flaws in multilayered structures", Mech. Compos. Mater., 15(5), 934-937.
  3. ASTM C 39-01 (2001), Standard test method for compressive strength of cylindrical concrete specimens. Annual Book of ASTM Standards, American Society for Testing and Materials (ASTM) International, West Conshohocken, PA.
  4. ASTM C 215-08 (2008), Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, American Society for Testing and Materials (ASTM) International, West Conshohocken, PA.
  5. ASTM C 597-09 (2009), Standard Test Method for Pulse Velocity Through Concrete, American Society for Testing and Materials (ASTM) International, West Conshohocken, PA.
  6. ASTM C 666-03 (2008), Standard test method for resistance of concrete to rapid freezing and thawing, American Society for Testing and Materials (ASTM) International, West Conshohocken, PA.
  7. Buck, O., Morris, W. and Richardson, J.M. (1978), "Acoustic harmonic generation at unbonded interfaces and fatigue cracks", Appl. Phys. Lett., 33(5), 371-373. https://doi.org/10.1063/1.90399
  8. Chen, X.J., Kim, J.Y., Kurtis, K.E., Qu, J., Shen, C.W. and Jacobs, L.J. (2008), "Characterization of progressive microcracking in Portland cement mortar using nonlinear ultrasonics", NDT&E Int., 41(2), 112-118. https://doi.org/10.1016/j.ndteint.2007.08.009
  9. Donskoy, D., Sutin, A. and Ekimov, A. (2001), "Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing", NDT&E Int., 34(4), 231-238. https://doi.org/10.1016/S0963-8695(00)00063-3
  10. Herrmann, J., Kim, J.Y., Jacobs, L.J., Qu,J., Littles, J.W. and Savage, M.F. (2006), "Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves", J. Appl. Phys., 99(12), 124913-124918. https://doi.org/10.1063/1.2204807
  11. Hikata, A., Chick, B. and Elbaum, C. (1963), "Effect of dislocations on finite amplitude ultrasonic waves in aluminum", Appl. Phys. Lett., 3(11), 195-197. https://doi.org/10.1063/1.1753845
  12. Jacobsen, S., Gran, H.C., Sellevold, E.J. and Bakke, J.A. (1995), "High strength concrete-Freeze/thaw testing and cracking", Cement. Concrete Res., 25(8), 1775-1780. https://doi.org/10.1016/0008-8846(95)00173-5
  13. Jacobsen, S. and Sellevold, E.J. (1996), "Self healing of high strength concrete after deterioration by freeze/thaw", Cement. Concrete Res., 26(1), 55-62. https://doi.org/10.1016/0008-8846(95)00179-4
  14. Jhang, K.Y. (2009), "Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: a review", Int. J. Precis. Eng. Man., 10(1), 123-135. https://doi.org/10.1007/s12541-009-0019-y
  15. Kim, J.H., Kwak, H.G. and Min, J. (2010), "Characterization of the crack depth in concrete using self-compensating frequency response function", NDT&E Int., 43(5), 375-384. https://doi.org/10.1016/j.ndteint.2010.03.002
  16. Kim, J.H. and Kwak, H.G. (2008), "Nondestructive evaluation of elastic properties of concrete using simulation of surface waves", Comput.‐ Aided Civil. Inf., 23(8), 611-624. https://doi.org/10.1111/j.1467-8667.2008.00562.x
  17. Mehta, P.K. and Monteiro, P.J. (2006), Concrete: microstructure, properties, and materials (3rd Ed.), McGraw-Hill Professional, New York, NY, USA.
  18. Mindess, S., Young, J.F. and Darwin, D. (2003), Concrete (2nd Ed.), Prentice Hall, Upper Saddle River, NJ, USA.
  19. Molero, M., Aparicio, S., Al-Assadi, G., Casati, M., Hernández, M. and Anaya, J. (2012), "Evaluation of freeze-thaw damage in concrete by ultrasonic imaging", NDT&E Int., 52, 86-94. https://doi.org/10.1016/j.ndteint.2012.05.004
  20. Nagy, P.B. (1998), "Fatigue damage assessment by nonlinear ultrasonic materials characterization", Ultrasonics, 36(1), 375-381. https://doi.org/10.1016/S0041-624X(97)00040-1
  21. Payan, C., Garnier, V. and Moysan, J. (2010a), "Effect of water saturation and porosity on the nonlinear elastic response of concrete", Cement Concrete. Res., 40(3), 473-476. https://doi.org/10.1016/j.cemconres.2009.10.021
  22. Payan, C., Garnier, V. and Moysan, J. (2010b), "Potential of nonlinear ultrasonic indicators for nondestructive testing of concrete", Adv. Civil. Eng., 2010, 1-8.
  23. Popovics, S., Rose, J.L. and Popovics, J.S. (1990), "The behaviour of ultrasonic pulses in concrete", Cement Concrete. Res., 20(2), 259-270. https://doi.org/10.1016/0008-8846(90)90079-D
  24. Selleck, S.F., Landis, E.N., Peterson, M.L., Shah, S.P. and Achenbach, J.D. (1998), "Ultrasonic investigation of concrete with distributed damage", ACI Mater. J., 95(1), 27-36.
  25. Stutzman, P. (2004), "Scanning electron microscopy imaging of hydraulic cement microstructure", Cement Concrete Compos., 26(8), 957-966. https://doi.org/10.1016/j.cemconcomp.2004.02.043
  26. Van Den Abeele, K.E.A. (1996), "Elastic pulsed wave propagation in media with second‐or higher‐order nonlinearity. Part I. Theoretical framework", J. Acoust. Soc. Am., 99, 3334. https://doi.org/10.1121/1.414890
  27. Van Den Abeele, K.E.A., Johnson, P.A. and Sutin, A. (2000), "Nonlinear elastic wave spectroscopy (NEWS) techniques to discern material damage, part I: nonlinear wave modulation spectroscopy (NWMS)", Res. Nondestruct. Eval., 12(1), 17-30. https://doi.org/10.1080/09349840009409646
  28. Van Den Abeele, K.E.A., Sutin, A., Carmeliet, J. and Johnson, P.A. (2001), "Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS)", NDT&E Int., 34(4), 239-248. https://doi.org/10.1016/S0963-8695(00)00064-5
  29. Warnemuende, K. and Wu, H.C. (2004), "Actively modulated acoustic nondestructive evaluation of concrete", Cement Concrete Res., 34(4), 563-570. https://doi.org/10.1016/j.cemconres.2003.09.008
  30. Yang, Z., Weiss, W.J. and Olek, J. (2006), "Water transport in concrete damaged by tensile loading and freeze-thaw cycling", J. Mater. Civil Eng., 18(3), 424-434. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:3(424)
  31. Yim, H.J., Kim, J.H., Park, S.J. and Kwak, H.G. (2012a), "Characterization of thermally damaged concrete using a nonlinear ultrasonic method", Cement Concrete Res., 42(11), 1438-1446. https://doi.org/10.1016/j.cemconres.2012.08.006
  32. Yim, H.J., Kwak, H.G. and Kim, J.H. (2012b), "Wave attenuation measurement technique for nondestructive evaluation of concrete", Nondestruct. Test. Eval., 27(1), 81-94. https://doi.org/10.1080/10589759.2011.606319
  33. Yim, H.J., Park, S.J., Kim, J.H. and Kwak, H.G. (2014), "Nonlinear ultrasonic method to evaluate residual mechanical properties of thermally damaged concrete", ACI Mater. J., 111(1-6), 1-11.
  34. Zaitsev, V., Nazarov, V., Gusev, V. and Castagnede, B. (2006), "Novel nonlinear-modulation acoustic technique for crack detection", NDT&E Int., 39(3), 184-194. https://doi.org/10.1016/j.ndteint.2005.07.007

피인용 문헌

  1. Characterization of stress-dependent ultrasonic nonlinearity variation in concrete under cyclic loading using nonlinear resonant ultrasonic method vol.145, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.201
  2. Nonlinear Resonance Vibration Assessment to Evaluate the Freezing and Thawing Resistance of Concrete vol.12, pp.2, 2019, https://doi.org/10.3390/ma12020325
  3. Reliability improvement of nonlinear ultrasonic modulation based fatigue crack detection using feature-level data fusion vol.20, pp.6, 2017, https://doi.org/10.12989/sss.2017.20.6.683
  4. High-speed angular-scan pulse-echo ultrasonic propagation imager for in situ non-destructive evaluation vol.22, pp.2, 2016, https://doi.org/10.12989/sss.2018.22.2.223
  5. Crack localization by laser-induced narrowband ultrasound and nonlinear ultrasonic modulation vol.25, pp.3, 2020, https://doi.org/10.12989/sss.2020.25.3.301