Advances in aircraft and spacecraft science

  • 제3권1호
  • /
  • Pages.29-43
  • /
  • 2016
  • /
  • 2287-528X(pISSN)
  • /
  • 2287-5271(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of temperature and blank holder force on non-isothermal stamp forming of a self-reinforced composite

  • 투고 : 2015.03.30
  • 심사 : 2015.07.07
  • 발행 : 2016.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Composite materials are rapidly gaining popularity as an alternative to metals for structural and load bearing applications in the aerospace, automotive, alternate energy and consumer industries. With the advent of thermoplastic composites and advances in recycling technologies, fully recyclable composites are gaining ground over traditional thermoset composites. Stamp forming as an alternative processing technique for sheet products has proven to be effective in allowing the fast manufacturing rates required for mass production of components. This study investigates the feasibility of using the stamp forming technique for the processing of thermoplastic, recyclable composite materials. The material system used in this study is a self-reinforced polypropylene composite material (Curv$^{(R)}$). The investigation includes a detailed experimental study based on strain measurements using a non-contact optical measurement system in conjunction with stamping equipment to record and measure the formability of the thermoplastic composites in real time. A Design of Experiments (DOE) methodology was adopted to elucidate the effect of process parameters that included blank holder force, pre heat temperature and feed rate on stamp forming. DOE analyses indicate that feed rate had negligible influence on the strain evolution during stamp forming and blank holder force and preheat temperature had significant effect on strain evolution during forming.

키워드

참고문헌

  1. Davey, S., Das, R., Cantwell, W.J. and Kalyanasudaram, S. (2013), "Forming studies of carbon fibre composite sheets in dome forming processes", Compos. Struct., 97, 310-316. https://doi.org/10.1016/j.compstruct.2012.10.026
  2. Cabrera, N., Reynolds, C., Alcock, B. and Peijs, T. (2008), "Non-isothermal stamp forming of continuous tape reinforced all-polypropylene composite sheet", Compos. Part A: Appl. Sci. Manuf., 39(9), 1455-1466. https://doi.org/10.1016/j.compositesa.2008.05.014
  3. Cao, J., Akkerman, R., Boisse, P., Chen, J., Cheng, H., de Graaf, E., Gorczyca, J., Harrison, P., Hivet, G. and Launay, J. (2008), "Characterization of mechanical behaviour of woven fabrics: Experimental methods and benchmark results", Compos. Part A: Appl. Sci. Manuf., 39(6), 1037-1053. https://doi.org/10.1016/j.compositesa.2008.02.016
  4. Compston, P., Cantwell, W.J., Cardew-Hall, M.J., Kalyanasundaram, S. and Mosse, L. (2004), "Comparison of surface strain for stamp formed aluminum and an aluminum-polypropylene laminate", J. Mater. Sci., 39, 6087-6088. https://doi.org/10.1023/B:JMSC.0000041707.68685.72
  5. Gresham, J., Cantwell, W.J., Cardew-Hall, M.J., Compston, P. and Kalyanasundaram, S. (2006), "Drawing behaviour of metal-composite sandwich structures", Compos. Struct., 75, 305-312. https://doi.org/10.1016/j.compstruct.2006.04.010
  6. Hawken, P., Lovins, A.B. and Lovins, L.H. (2000), Natural Capitalism, The Next Industrial Revolution, Earthscan Publication, London, N1 9JN, United Kingdom.
  7. Kalyanasundaram, S., DharMalingam, S., Venkatesan, S. and Sexton, A. (2013), "Effect of process parameters during forming of self reinforced-PP based fiber metal laminate", Compos. Struct., 97, 332-337. https://doi.org/10.1016/j.compstruct.2012.08.053
  8. Lee, J.H., Vogel, J.H. and Rhee, K.Y. (2002), "An analysis of stretch forming of thermoplastic composites", Polym. Compos., 23(3), 442-453. https://doi.org/10.1002/pc.10446
  9. Lim, T.C., Ramakrishna, S. and Shang, H.M. (1999), "Axisymmetric sheet forming of knitted fabric composite by combined stretch forming and deep drawing", Compos. Part B: Eng., 30(5), 495-502. https://doi.org/10.1016/S1359-8368(99)00015-3
  10. Lussier, J.D. and Chen, J. (2002), "Material characterization of woven fabrics for thermoforming of composites", J. Thermoplast. Compos. Mater., 15(6), 497-509. https://doi.org/10.1177/0892705702015006205
  11. Mosse, L., Compston, P., Cantwell, W.J., Cardew-Hall, M.J. and Kalyanasundaram, S. (2005), "The effect of process temperature on the formability of polypropylene based fibre-metal laminates", Compos. Part A, 36, 1158-1166. https://doi.org/10.1016/j.compositesa.2005.01.009
  12. Mosse, L., Compston, P., Cantwell, W.J., Cardew-Hall, M.J. and Kalyanasundaram, S. (2006), "The development of a finite element model for simulating the stamp forming of fibre-metal, laminates", Compos. Struct., 75, 298-304. https://doi.org/10.1016/j.compstruct.2006.04.009
  13. Mosse, L., Compston, P., Cantwell, W.J., Cardew-Hall, M.J. and Kalyanasundaram, S. (2006), "Stamp forming of polypropylene based fibre-metal laminates: The effect of process variables on formability", J. Mater. Proc. Tech., 172, 163-168. https://doi.org/10.1016/j.jmatprotec.2005.09.002
  14. Sexton, A., Cantwell, W.J. and Kalyanasundaram, S. (2012), "Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene composite", Compos. Struct., 94, 431-437. https://doi.org/10.1016/j.compstruct.2011.08.004
  15. Venkatesan, S. (2012), "Stamp forming of composite materials: An experimental and analytical study", Ph.D. Dissertation, Australian National University, Canberra.

피인용 문헌

  1. Identification and validation of a hyperelastic model for self-reinforced polypropylene draping vol.14, pp.1, 2021, https://doi.org/10.1007/s12289-020-01542-3