References
- M.A. Green, "Thin-Film Solar Cells: Review of Materials, Technologies, and Commercial Status," J. Mater. Sci., vol. 18, no. 1, Oct. 2007, pp. 15-19.
- F.C. Krebs, "Fabrication and Processing of Polymer Solar Cells: A Review of Printing and Coating Techniques," Solar Energy Mater. Solar Cells, vol. 93, no. 4, Apr. 2009, pp. 394-412. https://doi.org/10.1016/j.solmat.2008.10.004
-
P. Jackson et al., "Properties of
$Cu(In,Ga)Se_2$ Solar Cells with New Record Efficiencies up to 21.7%," Physica Status Solidi (RRL), vol. 9, no. 1, Jan. 2015, pp. 28-31. https://doi.org/10.1002/pssr.201409520 -
M. Kemell, M. Ritala, and M. Leskela, "Thin-Film Deposition Methods for
$CuInSe_2$ Solar Cells," Critical Rev. Solid State Mater. Sci., vol. 30, no. 1, Jan. 2005, pp. 1-31. https://doi.org/10.1080/10408430590918341 - T. Todorov and D.B. Mitzi, "Direct Liquid Coating of Chalcopyrite Light-Absorbing Layers for Photovoltaic Devices," European J. Inorganic Chem., vol. 2010, no. 1, Jan. 2010, pp. 17-28. https://doi.org/10.1002/ejic.200900837
-
N.-M. Park, H.S. Lee, and J. Kim, "Reactive Sputtering Process for
$CuIn_{1-x}GaxSe_2$ Thin-Film Solar Cells," ETRI J., vol. 34, no. 5, Oct. 2012, pp. 779-782. https://doi.org/10.4218/etrij.12.0212.0062 - K. Ramanathan et al., "Processing and Properties of Submicron CIGS Solar Cells," World Conf. Photovoltaic Solar Energy Convers., HI, USA, May 7-12, 2006, pp. 380-383.
-
N.-M. Park et al., "Effect of Se Flux on
$CuIn_{1-x}GaxSe_2$ Film in Reactive Sputtering Process," Progress Photovoltaic: Res. Appl., vol. 20, no. 7, Nov. 2012, pp. 899-903. https://doi.org/10.1002/pip.1202 -
S. Yang et al., "Bandgap Optimization of Submicron-Thick
$Cu(In,Ga)Se_2$ Solar Cells," Progress Photovoltaic: Res. Appl., vol. 23, no. 9, Sept. 2015, pp. 1157-1163. https://doi.org/10.1002/pip.2543 - B. Hua et al., "Efficient Photon Management with Nanostructures for Photovoltaics," Nanoscale, vol. 5, no. 15, May 2013, pp. 6627-6640. https://doi.org/10.1039/c3nr01152f
- M. Singh et al., "Thin-Film Copper Indium Gallium Selenide Solar Cell Based on Low-Temperature All-Printing Process," ACS Appl. Mater. Interfaces, vol. 6, no. 18, Sept. 2014, pp. 16297-16303. https://doi.org/10.1021/am504509r
-
Y.-D. Chung et al., "Effect of Annealing on
$Cds/Cu(In,Ga)Se_2$ Thin-Film Solar Cells," Current Appl. Physics, vol. 11, no. 1, Jan. 2011, pp. S65-S67. https://doi.org/10.1016/j.cap.2010.11.018 - Y. Guo et al., "Facile Additive-Free Solvothermal Synthesis of Cadmium Sulfide Flower-Like Three Dimensional Assemblies with Unique Optical Properties and Photocatalytic Activity," CrystEngComm, vol. 13, no. 16, Aug. 2011, pp. 5045-5048. https://doi.org/10.1039/c1ce05132f
- D.S. Dhawale et al., "Room Temperature Synthesis and Characterization of CdO Nanowires by Chemical Bath Deposition (CBD) Method," Appl. Surface Sci., vol. 254, no. 11, Mar. 2008, pp. 3269-3273. https://doi.org/10.1016/j.apsusc.2007.11.013
- R.S. Mane and C.D. Lokhande, "Chemical Deposition Method for Metal Chalcogenide Thin Films," Mater. Chem. Physics, vol. 65, no. 1, June 2000, pp. 1-31. https://doi.org/10.1016/S0254-0584(00)00217-0
-
Y.-K. Liao et al., "Non-antireflective Scheme for Efficiency Enhancement of
$Cu(In,Ga)Se_2$ Nanotip Array Solar Cells," ACS Nano, vol. 7, no. 8, Aug. 2013, pp. 7318-7329. https://doi.org/10.1021/nn402976b - N.-M. Park et al., "Surface Texturing Effect of CdS Film on CIGS Solar Cell Efficiency," Electrochem. Soc. Meeting, Vienna, Austria, Oct. 4-9, 2009, p. 757.
-
K.-S. Lee et al., "Analysis of the Current-Voltage Curves of a
$Cu(In,Ga)Se_2$ Thin-Film Solar Cell Measured at Different Irradiation Conditions," J. Opt. Soc. Korea, vol. 14, no. 4, Dec. 2010, pp. 321-325. https://doi.org/10.3807/JOSK.2010.14.4.321 - A.D. Dhass, E. Natarajan, and L. Ponnusamy, "Influence of Shunt Resistance on the Performance of Solar Photovoltaic Cell," Int. Conf. Emerging Trends Electr. Eng. Energy Manag., Chennai, India, Dec. 13-15, 2012, pp. 382-386.
- M. Mushrush et al., "Development of a High-Pressure CdS Sputtering Process for Improved Efficiency in CIGS-Based Photovoltaic Devices," IEEE Photovoltaic Specialists Conf., Austin, TX, USA, June 3-8, 2012, pp. 895-898.
Cited by
- Interface Analysis of Cu(In,Ga)Se2 and ZnS Formed Using Sulfur Thermal Cracker vol.38, pp.2, 2015, https://doi.org/10.4218/etrij.16.2515.0031
- Carrier transport and performance limit of semi-transparent photovoltaics: CuIn1−xGaxSe2 as a case study vol.130, pp.17, 2021, https://doi.org/10.1063/5.0063930