Advances in aircraft and spacecraft science

  • 제2권1호
  • /
  • Pages.77-94
  • /
  • 2015
  • /
  • 2287-528X(pISSN)
  • /
  • 2287-5271(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A computational approach to the simulation of controlled flows by synthetic jets actuators

  • Ferlauto, Michele (Department of Mechanical and Aerospace Engineering, Politenico di Torino) ;
  • Marsilio, Roberto (Department of Mechanical and Aerospace Engineering, Politenico di Torino)
  • 투고 : 2014.05.27
  • 심사 : 2014.10.01
  • 발행 : 2015.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

The paper focuses on the integration of a non-linear one-dimensional model of Synthetic Jet (SJ) actuator in a well-assessed numerical simulation method for turbulent compressible flows. The computational approach is intended to the implementation of a numerical tool suited for flow control simulations with affordable CPU resources. A strong compromise is sought between the use of boundary conditions or zero-dimensional models and the full simulation of the actuator cavity, in view of long-term simulation with multiple synthetic jet actuators. The model is integrated in a multi-domain numerical procedure where the controlled flow field is simulated by a standard CFD method for compressible RANS equations, while flow inside the actuator is reduced to a one-dimensional duct flow with a moving piston. The non-linear matching between the two systems, which ensures conservation of the mass, momentum and energy is explained. The numerical method is successfully tested against three typical test cases: the jet in quiescent air, the SJ in cross flow and the flow control on the NACA0015 airfoil.

키워드

참고문헌

  1. Carpenter, P.W., Lockerby, D. and Davies, C. (2000), "Numerical simulation of the interaction of mems actuators and boundary layers", AIAA Paper 2000-4330.
  2. Cattafesta, L. and Sheplak, M. (2011), "Actuators for active flow control", Ann. Rev. Fluid Mech., 43, 247-272. https://doi.org/10.1146/annurev-fluid-122109-160634
  3. Chen, F. and Beeler, G. (2002), "Virtual shaping of a two dimensional naca0015 airfoil using synthetic jet actuator", AIAA Paper 2002-3273.
  4. Donovan, J., Kral, L. and Cary, A. (1998), "Active flow control applied to an airfoil", AIAA Paper 98-0210.
  5. Duvigneau, R. and Visonneau, M. (2006), "Optimization of a synthetic jet actuators for aerodynamic stall control", Comput. Fluid., (35), 624-38.
  6. Ferlauto, M. and Marsilio, R. (2001), "Computation of plug nozzle turbulent flowfields", 15th ISOABE Conference, ISABE Paper-1185.
  7. Ferlauto, M. and Marsilio, R. (2006), "Simulation of jet engine transient by a cfd method", 42nd AIAA Joint Propulsion Conference, AIAA Paper 2006-4968.
  8. Ferlauto, M. and Marsilio, R. (2009), "Synthetic jet actuator modeling for flow control applications", Comput. Fluid Dyn., 573-578.
  9. Fugal, S., Smith, B. and Spall, R. (2005), "Displacement amplitude scaling of a two-dimensional synthetic jet", Phys. Fluid., (17), 451-60.
  10. Gad, M. el H. (2000), Flow control: passive, active, and reactive flow management, Cambridge University Press.
  11. Gallas, Q., Mathew, J., Kaysap, A., Holman, R., Nishida, T., Carrol, B., Sheplak, M. and Cattafesta, L. (2002), "Lumped element modeling of piezoelectric-driven synthetic jet actuators", AIAA Paper 2002-0125.
  12. Gilarranz, J., Traub, L. and Rediniotis, O. (2005), "A new class of synthetic jet actuators - part ii: application to flow separation control", J. Fluid. Eng., 127(2), 377-387. https://doi.org/10.1115/1.1882393
  13. Glezer, A. and Amitay, M. (2002), "Synthetic jets", Ann. Rev. Fluid Mech., 34(1), 503-529. https://doi.org/10.1146/annurev.fluid.34.090501.094913
  14. Guo, D. and Gary, A. (2001), "Vectoring control of a primary jet with synthetic jets", AIAA paper 2001-0738.
  15. Kral, L., Donovan, J., Cain, A. and Cary, A. (1997), "Numerical simulation of synthetic jet actuators", AIAA Paper 97-1824.
  16. Mittal, R., Ramunggoon, P. and Udaykumar, H. (2001), "Interaction of a synthetic jet with a at plate boundary layer", AIAA Paper2001-2773.
  17. Orazi, M., Lasagna, D. and Iuso, G. (2011). "Virtual shaping on naca0015 by means of a high momentum coefficient synthetic jet", Int. J. Flow Control, 3(4), 255-275. https://doi.org/10.1260/1756-8250.3.4.255
  18. Pandolfi, M. (1983), "A contribution to the numerical prediction of unsteady flows", AIAA J., 22, 37-46.
  19. Rehman, A. and Kontis, K. (2006), "Synthetic jet control effectiveness on stationary and pitching airfoils", J. Aircraft, 43(6), 1782-1789. https://doi.org/10.2514/1.20333
  20. Rizzetta, D., Visbal, M. and Stanek, M. (1998), "Numerical investigation of synthetic jet flowfields", AIAA Paper 98-2910.
  21. Rumsey, C.L., Gatski, T.B., Sellers, W.L., Vasta, V.N. and Viken, S.A. (2006), "Summary of the 2004 computational fluid dynamics validation workshop on synthetic jets", AIAA J., 44(2), 194-207. https://doi.org/10.2514/1.12957
  22. Seifert, A., Darabi, A. and Wygnanski, I. (1996), "Delay of airfoil stall by periodic excitation", AIAA J., 33(4), 691-707.
  23. Sheidahl, R. and Klimes, P. (1981), "Aerodynamic characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines", Sandia report SAND80-2114, UC-60.
  24. Smith, B. and Swift, G. (2003), "A comparison between synthetic jets and continuous jets", Exper. Fluid., 34, 467-472. https://doi.org/10.1007/s00348-002-0577-6
  25. Smith, D., Amitay, M., Kibens, V., Parekh, D. and Glezer, A. (1998), "Modification of lifting body aerodynamics using synthetic jet actuators", AIAA Paper 98-0209.
  26. Spalart, P. and Allmaras, S. (1994), "A one-equation turbulence model for aerodynamic flows", La Recherche Aerospatiale, 5-21.
  27. Traubs, L., Miller, A. and Rediniotis, O. (2004), "Effect of synthetic jet actuation on a ramping naca0015 airfoil", J. Aircraft, 41(5), 1153-1162. https://doi.org/10.2514/1.3500
  28. Vatsa, V. and Turkel, E. (2006), "Simulation of synthetic jets using unsteady reynolds-averaged navierstokes equations", AIAA J., 44, 217-224. https://doi.org/10.2514/1.13535
  29. Yamaleev, N. and Carpenter, M. (2006), "Quasi-1-d model for realistic 3-d synthetic jet actuators", AIAA J., 44(2), 208-216. https://doi.org/10.2514/1.14495
  30. Yamaleev, N., Carpenter, M. and Ferguson, F. (2005), "Reduced-order model for efficient simulation of synthetic jet actuators", AIAA J., 43(2), 357-369. https://doi.org/10.2514/1.7077

피인용 문헌

  1. Numerical Investigation of the Dynamic Characteristics of a Dual-Throat-Nozzle for Fluidic Thrust-Vectoring vol.55, pp.1, 2017, https://doi.org/10.2514/1.J055044
  2. Numerical Simulation of Fluidic Thrust-Vectoring vol.95, pp.3, 2016, https://doi.org/10.1007/bf03404724