References
- Energy Economic News, http://www.ekn.kr/news/article.html?no=78915.
- Park, S. H., Kim, J. H. and Kim, W. H., 2009, "An Evaluation on Sealing Performance of Elastomeric Oring Compressed and Highly Pressurized," Journal of the Korea society for Precision Engineering, Vol. 26, No. 2, pp. 86-93.
- Kim, C. K., 2005, "On the Contact Behavior Analysis of the O-ring Depending on the Contact Surface Profiles," Trans. Korean Soc. Mech. Eng. A, Vol. 29, No. 2, pp. 169-175. https://doi.org/10.3795/KSME-A.2005.29.2.169
- Kim, C. K. and Kim, D. H., 2012, "Finite Element Analysis on the Deformation Behavior Stability of Contact Sealing Rings," Journal of The Korean Institute of Gas, Vol. 16, No. 5, pp. 47-51. https://doi.org/10.7842/kigas.2012.16.5.47
- Kim, D. T. and Zhang, Z. J., 2011, "Analysis of a Low Friction Piston Seal in Pneumatic Cylinders," Journal of Drive and Control, Vol. 8, No. 3, pp. 21-26.
- Yoo, M. H. and Lee, T. S., 2009, "A Study on the Relationship Between Stress Relaxation and Performance of a Lip Seal," Journal of the Korea Society for Precision Engineering, Vol. 26, No. 11, pp. 85-91.
- Yoo, M. H., Lee, T. S. and Kwon, J. H., 2006, "Computational and Experimental Investigation on UType Seal of Hydraulic Actuator," Journal of the Korea society for Precision Engineering, Vol. 23, No. 12, pp. 80-87.
- Ahn, J. T., Lee, K. C., Lee, Y. B. and Han, S. H., 2011, "Seat Tightness of Flexible Metal Seal of Butterfly Valve at Cryogenic Temperatures," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 6, pp. 643-649. https://doi.org/10.3795/KSME-A.2011.35.6.643
- Timoshenko, S. P., 1970, Theory of Elasticity, Mc Graw-Hill, New York.
- An, S. C., 2000, "Optimal Design of Dimensions of Die and Stress Rings in Extrusion," Korea Advanced Institute of Science and Technology, pp. 12-14.
- Kim, E. H., Jang, J. H., Park, S. P. and Moon, Y. H., 2010, "Analysis of the Stress Characteristics of Double Layered Tube at Elevated Temperature," Transactions of Materials Processing, Vol. 19, No. 7, pp. 405-410. https://doi.org/10.5228/KSTP.2010.19.7.405
- Hur, K. D., Yeo, H. T. and Ye, S. D., 2000, "Design of the Prestressed Cold Extrusion Die with Two Stress Rings," Journal of the Korea society for Precision Engineering, Vol. 17, No. 10, pp. 77-82.
- Kim, T. H., Kim, B. M. and Choi, J. C., 1995, "Methodology of Tool Analysis to Improve the Accuracy of Cold Forged Parts," Journal of the Korea Society for Precision Engineering, Vol. 12, No. 1, pp. 29-33.
- Truman, C. E. and Booker, J. D., 2007, "Analysis of a Shrink-Fit Failure on a Gear Hub/Shaft Assembly," Engineering Failure Analysis, Vol. 14, No. 4, pp. 557-572. https://doi.org/10.1016/j.engfailanal.2006.03.008
- Noda, N. A., Suryadi, D., Kumasaki, S., Sano, Y. and Takase, Y., 2015, "Failure Analysis for Coming out of Shaft from Shrink-Fitted Ceramic Sleeve," Engineering Failure Analysis, Vol. 57, pp. 219-235. https://doi.org/10.1016/j.engfailanal.2015.07.016
- ANSYS, 2010, ANSYS Workbench Basic, ANSYS Inc., Pennsylvania, U.S.
- Lee, M. H. and Kim, S. W., 2003, "Development of 2-Dim Lagrangian Hydrocode and Application to Large Deformation Problems," Trans. Korean Soc. Mech. Eng. A, Vol. 27, No. 3, pp. 409-415. https://doi.org/10.3795/KSME-A.2003.27.3.409
- Lee, K. S., Kim, D. W., Park, S. H., Cho, S. H. and Kim, B. W., 2002, "Analysis of Dynamic Contact and Stress of a Valve in Internal Combustion Engine," Transactions of KSAE, Vol. 10, No. 2, pp. 159-165.
- Kim, M. H., Kim, S. S. and Yun, H. S., 2013, "Comparative Study on DAE Solution Methods for Effective Multi-Body Dynamics Analysis of Unmanned Military Robot Based on Subsystem Synthesis Method," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 9, pp. 1069-1075. https://doi.org/10.3795/KSME-A.2013.37.9.1069