대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제39권12호
  • /
  • Pages.1251-1256
  • /
  • 2015
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

건성마찰 소음에 대한 부식 영향도 실험연구

An Experimental Investigation of the Effect of Corrosion on Dry Friction Noise

  • 백종수 (공주대학교 기계자동차공학부) ;
  • 강재영 (공주대학교 기계자동차공학부)
  • Baek, Jongsu (Dept. of Mechanical Engineering, Kongju Nat'l Univ.) ;
  • Kang, Jaeyoung (Dept. of Mechanical Engineering, Kongju Nat'l Univ.)
  • 투고 : 2015.07.14
  • 심사 : 2015.09.10
  • 발행 : 2015.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 왕복운동 및 회전운동 마찰 실험장치를 이하여 부식금속의 마찰소음특성을 파악하였다. 그 결과 부식금속이 소음발생 시키고 마찰소음의 크기를 증가시키는 것을 확인하였다. 또한, 마찰소음에서 부식의 영향은 마찰표면의 변화로부터 기인하는 것을 관찰할 수 있다. 마찰이 지속적으로 발생될 때 부식금속 마찰계수의 음의 기울기가 증가하여 부식이 되지 않은 금속에 비해 상대적으로 빠르게 불안정해 질 수 있음을 확인하였다.

This study investigates the friction noise characteristic in relation to the corrosion of metal by using the frictional reciprocating and pin-on-disk system. From the experiments, it is found that the corrosion of metal advances the onset time and increases the magnitude of friction noise. Further, it is observed that the effect of corrosion on friction noise stems from the alteration of tribo-surface during repetitive frictional motion. The alteration of the corrosive contact surface induces a negative friction-velocity slope, by which the corrosion of metal can generate dynamic instability faster than non-corrosion of metal.

키워드

참고문헌

  1. Jibiki, T., Shima, M., Akita, H. and Tamura, M., 2001, "A Basic Study of Friction Noise Caused by Fretting," Wear, Vol. 251, pp. 1492-1503. https://doi.org/10.1016/S0043-1648(01)00792-X
  2. Chen, G. X. and Zhou, Z. R., 2007, "Time-frequency Analysis of Friction-induced Vibration Under Reciprocating Sliding Conditions," Wear, Vol. 262, No. 112, pp. 1-10. https://doi.org/10.1016/j.wear.2006.03.055
  3. Chen, G. X. and Zhou, Z. R. and Philippe, K. and Leo. V., 2002, "Effect of Surface Topography on Formation of Squeal Under Reciprocating Sliding," Wear, Vol. 253, pp. 411-423. https://doi.org/10.1016/S0043-1648(02)00161-8
  4. Meziane, A. and Baillet, L. and Laulgnet, B., 2010, "Experimental and Numerical Investigation on Friction-Induced Vibration of a Beam-on-Beam in Contact with Friction," Applied Acoustics, Vol. 71, pp. 843-853. https://doi.org/10.1016/j.apacoust.2010.04.012
  5. Choi, H., Kang, J., 2014, Characteristics of Friction Noise with Changes of the Natural Frequencies in the Reciprocating Motion, Vol.24, pp. 332-338. https://doi.org/10.5050/KSNVE.2014.24.4.332
  6. Nam, J. and Kang, J., 2012, "A Basic Experimental Study on the Squeak Noise Using the Pin-on-disk," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 8, pp. 736-741. https://doi.org/10.5050/KSNVE.2012.22.8.736
  7. Nam, J. and Kang, J., 2013, "Characteristics of Friction Noise with Respect to Friction Curve," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 23, No. 5, pp. 423-430. https://doi.org/10.5050/KSNVE.2013.23.5.423
  8. Kang, J., 2014, "Investigation on Friction Noise in Beam Structure Under Mode-Coupling by Using Analytical Finite-Element Squeal Model," Trans. Korean Soc. Mech. Eng. A, Vol. 38, No. 5, pp. 545-550 https://doi.org/10.3795/KSME-A.2014.38.5.545
  9. Baek, J. and Kang, J., 2015, "An Experimental Investigation of Dry Friction Noise for Several Metallic Materials," Trans. Korean Soc. Mech. Eng. A, Vol. 39, No. 7, pp. 681-686 https://doi.org/10.3795/KSME-A.2015.39.7.681
  10. Grzesik, W., Zalisz, Z. and Nieslony, P., 2002, "Friction and Wear Testing of Multilayer Coatings on Carbide Substrates for Dry Machining Applications," Surface and Coatings Technology, Vol. 155, pp. 37-45 https://doi.org/10.1016/S0257-8972(02)00040-3
  11. Lee, H., 2005, Friction Wear Engineering, Taeilsa, Dae Gu, pp.95-117.

피인용 문헌

  1. Lyapunov exponent of friction-induced vibration under smooth friction curve vol.32, pp.8, 2018, https://doi.org/10.1007/s12206-018-0707-6