Abstract
This study is the material of the additional filter(Cu, Ni, CaWO4, Gd+Ba) being used when the diagnosis X-ray was varied to evaluate the spatial dose distribution accordingly. And it suggest to find a suitable material. Experiments using MCNPX program based on the Monte Carlo simulation method was carried out by selecting the chest and abdomen taken. As a result, each material per dose, the average scatter dose is approximately 62%, 100 cm radius of the point of the simulated body surface exposure dose and 50 cm radius centered on the point average about 47%. It is determined that an Al material is currently available in accordance with the result to be replaced by Cu, Ni material is sufficient. With just the thickness due to the difference in the atomic number and density adjusted to be about one-tenth of the Al it will be suitable.
본 연구는 진단용 X선 검사 시 사용하고 있는 부가필터의 재질(Cu, Ni, CaWO4, Gd+Ba)을 다양화하여 그에 따른 검사실 내의 공간선량을 평가 한 후 적합한 재질을 찾아 제시하고자 하였다. 실험은 몬테칼로 기법을 바탕으로 하는 MCNPX 프로그램을 사용하여 흉부와 복부검사를 선택하여 모의실험을 진행하였다. 그 결과 각 재질별 선량은 모의피폭체가 위치한 곳을 중심으로 반경 50 cm 인 지점의 평균 산란선량은 모의피폭체 표면선량의 약 62%, 반경 100 cm인 지점은 평균 약 47% 정도 측정되었다. 결과에 따라 현재 상용화 되어 있는 Al 재질을 Cu, Ni 재질이 충분히 대체가능 할 것으로 판단된다. 다만 원자번호와 밀도의 차이로 인하여 그 두께를 Al의 약 1/10 정도로 조정을 해서 사용하면 적합할 것이다.