Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Damping strategies for steel lattice sandwich constructions

  • Mai, Son P. (Institute of Mechanics)
  • Received : 2015.03.12
  • Accepted : 2015.05.20
  • Published : 2015.11.25
⟨ Previous Next ⟩

Abstract

A square steel sandwich plate with lattice corrugated core is explored for damping improvement. A range of damping materials are filled inside the openings provided by the corrugated core, or are applied on the surfaces of the facesheets. The dynamic properties such as natural frequency and damping factor are experimentally measured for the sandwich plate with each filling solution. The relative performance of each insertion is compared in terms of damping capacity and added mass.

Keywords

References

  1. 3M Scotch-Weld company; URL: www.3m.com
  2. ABAQUS Standard User's Mannual (2009), Version 6.9.
  3. Amith Kumar, S.J., Sabeel Ahmed, K. and Santosh, M.B. (2013), "Parametric analysis on the vibration characteristics of sandwich composites structure", Int. J. Mech. Eng. Rob., 1(1), 80-84.
  4. Baillargeon, B.P. and Vel, S.S. (2005), "Active vibration suppression of sandwich beams using piezoelectric shear actuators: experiments and numerical simulations", Intel. Mater. Sys. Struct., 16(6), 517-530. https://doi.org/10.1177/1045389X05053154
  5. Boucher, M.A., Smith, C.W., Scarpa, F., Rajasekaran, R. and Evans, K.E. (2013), "Effective topologies for vibration damping inserts in honeycomb structures", Com. Struct., 106, 1-14. https://doi.org/10.1016/j.compstruct.2013.05.036
  6. Budiansky, B. (1999), "On the minimum weights of compression structures", Int. J. Solids. Struct., 36(24), 3677-3708. https://doi.org/10.1016/S0020-7683(98)00169-3
  7. Caligen LTD company; URL: www.caligen.co.uk
  8. Ewins, D.J. (2000), Modal Testing, (2nd Edition), Research Studies Press Ltd., England.
  9. Harris, C.M. and Piersol, A.G. (2002), Harris' Shock and Vibration Handbook, McGraw-Hill, New York, NY, USA.
  10. Huang, H., Joe, C.R. and Kim, D.U. (2005), "Mechanical behavior of ruber-filled multifunctional honeycomb sandwich composite", Sandwich Structures 7: Advancing with Sandwich Structures and Materials, 671-680.
  11. Maheri, M.R., Adams, R.D. and Hugon, J. (2008), "Vibration damping in sandwich panels", J. Mater. Sci., 43(20), 6604-6618. https://doi.org/10.1007/s10853-008-2694-y
  12. Mai, S.P. (2014), "Experiment on box-section sandwich beams in three-point bending", J. Sand. Struct. Mater., 16(5), 534-550. https://doi.org/10.1177/1099636214541574
  13. Mai, S.P., Fleck, N.A. and Lu, T.J. (2007), "Optimal design of box-section sandwich beams in three-point bending", Int. J. Solids. Struct., 44(14-15), 4742-4769. https://doi.org/10.1016/j.ijsolstr.2006.11.046
  14. McConnell, K.G. (1995), Vibration Testing: Theory and Practice, (1st Edition), Wiley Interscience, New York, NY, USA.
  15. McDaniel, J.G. and Dupont, P. (2000), "A wave approach to estimating frequency-dependent damping under transient loading", J. Sound. Vib., 231(2), 433-449. https://doi.org/10.1006/jsvi.1999.2723
  16. Meo, F., Merlo, A., De la O Rodriguez, M., Brunner, B. and Ippolito, M. (2005), "Advanced hybrid mechatronic materials for ultra precise and high performance machining systems design", Proceedings of IPROMS (Virtual International Conference), Oxford, UK, July.
  17. Park, J. and Palumbo, D.L. (2009), "Damping of structural vibration using lightweight granular materials", J. Exp. Mech., 49(5), 697-705. https://doi.org/10.1007/s11340-008-9181-x
  18. Renji, K. and Shankar Narayan, S. (2002), "Loss factors of composite honeycomb sandwich panels", J. Sound Vib., 250(4), 745-761. https://doi.org/10.1006/jsvi.2001.3602
  19. Srikantha Phani, A. and Venkatraman, K. (2005), "Damping characteristics of electro-rheological fluid sandwich beams", J. Acta Mech., 180(1), 195-201. https://doi.org/10.1007/s00707-005-0250-2
  20. Srikantha Phani, A., Mai, S.P., Fleck, N.A. and Woodhouse, J. (2006), "A prismatic-core design for a milling machine component", Technical report, Cambridge University Engineering Department, UK.
  21. Sun, J.C., Sun, H.B., Chow, L.C. and Richard, E.J. (1986), "Predictions of total loss factors of structures, Part II: Loss factors of sand-filled structure", J. Sound Vib., 104(2), 243-257. https://doi.org/10.1016/0022-460X(86)90266-X
  22. Wang, B. and Yang, M. (2000), "Damping of honeycomb sandwich beams", Mater. Proc. Tech., 105(1-2), 67-72. https://doi.org/10.1016/S0924-0136(00)00564-1
  23. Woody, S.C. and Smith, S.T. (2006), "Damping of a thin-walled honeycomb structure using energy absorbing foam", J. Sound Vib., 291(1-2), 491-502. https://doi.org/10.1016/j.jsv.2005.06.001
  24. Yeh, J.Y. (2013), "Vibration analysis of sandwich rectangular plates with magnetorheological elastomer damping treatment", Smart Mater. Struct., 22(3), 035010. https://doi.org/10.1088/0964-1726/22/3/035010
  25. Zenkert, D. (1995), An Introduction to Sandwich Construction, Engineering Materials Advisory Services Ltd., UK.