References
- Kim, S. H., Hong, K., Xie, W., Lee, K. H., Zhang, S., et al., "Electrolyte‐Gated Transistors for Organic and Printed Electronics," Advanced Materials, Vol. 25, No. 13, pp. 1822-1846, 2013. https://doi.org/10.1002/adma.201202790
- Lee, C., Kang, H., and Shin, K., "Advanced Taper Tension Method for the Performance Improvement of a Roll-to-Roll Printing Production Line with a Winding Process," International Journal of Mechanical Sciences, Vol. 59, No. 1, pp. 61-72, 2012. https://doi.org/10.1016/j.ijmecsci.2012.03.005
- Lee, J., Shin, K., and Lee, C., "Analysis of Dynamic Thermal Characteristic of Register of Roll-to-Roll Multi-Layer Printing Systems," Robotics and Computer-Integrated Manufacturing, Vol. 35, pp. 77-83, 2015. https://doi.org/10.1016/j.rcim.2015.02.008
-
Knittel, D., Laroche, E., Gigan, D., and Koc, H., "Tension Control for Winding Systems with Two- Degrees-of-Freedom
$H{\infty}$ Controllers," IEEE Transactions on Industry Applications, Vol. 39, No. 1, pp. 113-120, 2003. https://doi.org/10.1109/TIA.2002.807231 - Lee, C., "A Study on the Taper Tension Control Considering Lateral Motion of a Moving Web in Roll to Roll Systems," Ph.D. Thesis, Mechanical Design and Production Engineering, Konkuk University, 2008.
- Altmann, H. C., "Formulas for Computing the Stresses in Center-Wound Rolls," Tappi Journal, Vol. 51, No. 4, pp. 176-179, 1968.
- Good, J. K., Pfeiffer, J. D., and Giachetto, R. M., "Losses in Wound-on-Tension in the Center Winding of Wound Rolls," Proc. of the Web Handling Symposium on ASME Applied Mechanics Division, Vol. 149, pp. 1-12, 1992.
- Burns, S. J., Meehnan, R. R., and Lambropoulos, J. C., "Strain-Based Formulas for Stresses in Profiled Center-Wound Rolls," Tappi Jorunal, Vol. 82, No. 7, pp. 159-167, 1999.
- Wan, F., Wang, Y. Q., Yan, X. C., and Cui, Y. G., "Correlation between Mandrel and Pinch Roll of Down-Coiler," Journal of Iron and Steel Research, Vol. 9, 2007.
- Lee, C., "Effect of Taper Tension Profiles on Radial Stress of a Wound Roll in Roll-to-roll Winding Process," J. Korean Soc. Precis. Eng., Vol. 31, No. 2, pp. 125-131, 2014. https://doi.org/10.7736/KSPE.2014.31.2.125