참고문헌
- A. J. Jacobson, "Materials for Solid Oxide Fuel Cells," Chem. Mater, 22 [3] 660-74 (2010). https://doi.org/10.1021/cm902640j
- P. I. Cowin, C. T. G. Petit, R. Lan, J. T. S. Irvine, and S. Tao, "Recent Progress in the Development of Anode Materials for Solid Oxide Fuel Cells," Advanced Energy Materials, 1 [3] 314-32 (2011). https://doi.org/10.1002/aenm.201100108
- C. W. Sun, R. Hui, and J. Roller, "Cathode Materials for Solid Oxide Fuel Cells: A Review," J. Solid State Electr., 14 [7] 1125-44 (2010). https://doi.org/10.1007/s10008-009-0932-0
- S. Lee, N. Miller, and K. Gerdes, "Long-term Stability of SOFC Composite Cathode Activated by Electrocatalyst Infiltration," J. Electrochem. Soc., 159 [7] F301-8 (2012). https://doi.org/10.1149/2.067207jes
- R. J. Gorte, S. Park, J. M. Vohs, and C. Wang, "Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid-oxide Fuel Cell," Adv. Mater., 12 [19] 1465-69 (2000). https://doi.org/10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9
- G. Kim, S. Lee, J. Y. Shin, G. Corre, J. T. S. Irvine, J. M. Vohs, and R. J. Gorte, "Investigation of the Structural and Catalytic Requirements for High-performance SOFC Anodes Formed by Infiltration of LSCM," Electrochem. Solid-State Lett., 12 [3] B48-52 (2009). https://doi.org/10.1149/1.3065971
- J.-S. Park, I. D. Hasson, M. D. Gross, C. Chen, J. M. Vohs, and R. J. Gorte, "A High-performance Solid Oxide Fuel Cell Anode Based on Lanthanum Strontium Vanadate," J. Power Sources, 196 [18] 7488-94 (2011). https://doi.org/10.1016/j.jpowsour.2011.05.028
-
S. Tao and J. T. S. Irvine, "Synthesis and Characterization of
$(La_{0.75}Sr_{0.25})Cr_{0.5}Mn_{0.5}O_{3-{\delta}}$ , a Redox-stable, Efficient Perovskite Anode for SOFCs," J. Electrochem. Soc., 151 [2] A252-59 (2004). https://doi.org/10.1149/1.1639161 - R. J. Gorte and J. M. Vohs, "Nanostructured Anodes for Solid Oxide Fuel Cells," Curr. Opin. Colloid Interface Sci., 14 [4] 236-44 (2009). https://doi.org/10.1016/j.cocis.2009.04.006
- L. Yang, Y. Choi, W. Qin, H. Chen, K. Blinn, M. Liu, P. Liu, J. Bai, T. A. Tyson, and M. Liu, "Promotion of Water-mediated Carbon Removal by Nanostructured Barium Oxide/ Nickel Interfaces in Solid Oxide Fuel Cells," Nat. Commun., 2 357 (2011). https://doi.org/10.1038/ncomms1359
- M. Asamoto, S. Miyake, K. Sugihara, and H. Yahiro, "Improvement of Ni/SDC Anode by Alkaline Earth Metal Oxide Addition for Direct Methane-solid Oxide Fuel Cells," Electrochem. Commun., 11 [7] 1508-11 (2009). https://doi.org/10.1016/j.elecom.2009.05.042
- T. Hong, F. Chen, and C. Xia, "Barium Carbonate Nanoparticle as High Temperature Oxygen Reduction Catalyst for Solid Oxide Fuel Cell," Electrochem. Commun., 51 93-97 (2015). https://doi.org/10.1016/j.elecom.2014.12.017
-
I. Arvanitidis, D. Siche, and S. Seetharaman, "A Study of the Thermal Decomposition of
$BaCO_3$ ," Metall. Materi. Trans. B, 27 [3] 409-16 (1996). https://doi.org/10.1007/BF02914905 - R. Barfod, M. Mogensen, T. Klemensø, A. Hagen, Y.-L. Liu, and P. Vang Hendriksen, "Detailed Characterization of Anode-supported SOFCs by Impedance Spectroscopy," J. Electrochem. Soc., 154 [4] B371-78 (2007). https://doi.org/10.1149/1.2433311
- S. Primdahl and M. Mogensen, "Gas Conversion Impedance: A Test Geometry Effect in Characterization of Solid Oxide Fuel Cell Anodes," J. Electrochem. Soc., 145 [7] 2431-38 (1998). https://doi.org/10.1149/1.1838654
- S. Primdahl and M. Mogensen, "Gas Diffusion Impedance in Characterization of Solid Oxide Fuel Cell Anodes," J. Electrochem. Soc., 146 [8] 2827-33 (1999). https://doi.org/10.1149/1.1392015
- S. B. Adler, "Limitations of Charge-transfer Models for Mixed-conducting Oxygen Electrodes," Solid State Ionics, 135 [1-4] 603-12 (2000). https://doi.org/10.1016/S0167-2738(00)00423-9
-
S.-E. Yoon, S.-H. Song, J. Choi, J.-Y. Ahn, B.-K. Kim, and J.-S. Park, "Coelectrolysis of Steam and
$CO_2$ in a Solid Oxide Electrolysis Cell with Ceramic Composite Electrodes," Int. J. Hydrogen Energy, 39 [11] 5497-504 (2014). https://doi.org/10.1016/j.ijhydene.2014.01.124