References
- J. P. P. Huijsmans, F. P. van Berkel, and G. M. Christie, "Intermediate Temperature SOFC - a Promise for the 21st Century," J. Power Sources, 71 [1-2] 107-10 (1998). https://doi.org/10.1016/S0378-7753(97)02789-4
- W. Z. Zhu and S. C. Deevi, "Development of Interconnect Materials for Solid Oxide Fuel Cells," Mater. Sci. Eng. A, 348 [1-2] 227-43 (2003). https://doi.org/10.1016/S0921-5093(02)00736-0
- T. Brylewski, M. Nanko, T. Maruyama, and K. Przybylski, "Application of Fe-16Cr Ferritic Alloy to Interconnector for a Solid Oxide Fuel Cell," Solid State Ionics, 143 [2] 131-50 (2001). https://doi.org/10.1016/S0167-2738(01)00863-3
- I. Antepara, I. Villarreal, L. M. Rodríguez-Martínez, N. Lecanda, U. Castro, and A. Laresgoiti, "Evaluation of Ferritic Steels for Use as Interconnects and Porous Metal Supports in IT-SOFCs," J. Power Sources, 151 [1-2] 103-7 (2005). https://doi.org/10.1016/j.jpowsour.2005.02.084
- J. W. Fergus, "Metallic Interconnects for Solid Oxide Fuel Cells," Mater. Sci. Eng. A, 397 [1-2] 271-83 (2005). https://doi.org/10.1016/j.msea.2005.02.047
- X. Chen, P. Y. Hou, C. P. Jacobson, S. J. Visco, and L. C. De Jonghe, "Protective Coating on Stainless Steel Interconnect for SOFCs: Oxidation Kinetics and Electrical Properties," Solid State Ionics, 176 [5-6] 425-33 (2005). https://doi.org/10.1016/j.ssi.2004.10.004
- P. Huczkowski, N. Christicmsen, V. Shemet, L. Niewolak, J. Piron-Abellan, L. Singheiser, and W. J. Quadakkers, "Growth Mechanisms and Electrical Conductivity of Oxide Scales on Ferritic Steels Proposed as Interconnect Materials for SOFC's," Fuel Cells, 6 [2] 93-9 (2006). https://doi.org/10.1002/fuce.200500110
- Z. Yang, K. S. Weil, D. M. Paxton, and J. W. Stevenson, "Selection and Evaluation of Heat-resistant Alloys for SOFC Interconnect Applications," J. Electrochem. Soc., 150 [9] A1188-201 (2003). https://doi.org/10.1149/1.1595659
- S. J. Geng, J. H. Zhu, and Z. G. Lu, "Evaluation of Several Alloys for Solid Oxide Fuel Cell Interconnect Application," Scr. Mater., 55 [3] 239-42 (2006). https://doi.org/10.1016/j.scriptamat.2006.04.008
- Y. Matsuzaki and I. Yasuda, "Dependence of SOFC Cathode Degradation by Chromium-containing Alloy on Compositions of Electrodes and Electrolytes," J. Electrochem. Soc., 148 [2] A126-31 (2001). https://doi.org/10.1149/1.1339869
- Y. D. Zhen, J. Li, and S. P. Jiang, "Oxygen Reduction on Strontium-Doped LaMnO3 Cathodes in the Absence and Presence of an Iron-chromium Alloy Interconnect," J. Power Sources, 162 [2] 1043-52 (2006). https://doi.org/10.1016/j.jpowsour.2006.08.034
-
S. N. Lee, A. Atkinson, and J. A. Kilner, "Effect of Chromium on
$La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ -Solid Oxide Fuel Cell Cathodes," J. Electrochem. Soc., 160 [6] F629-35 (2013). https://doi.org/10.1149/2.099306jes -
Z. Yang, G. G. Xia, X. H. Li, and J. W. Stevenson, "
$(Mn,Co)_3O_4$ Spinel Coatings on Ferritic Stainless Steels for SOFC Interconnect Applications," Int. J. Hydrogen Energy, 32 [16] 3648-54 (2007). https://doi.org/10.1016/j.ijhydene.2006.08.048 - W. Qu, L. Jian, J. M. Hill, and D. G. Ivey, "Electrical and Microstructural Characterization of Spinel Phases as Potential Coatings for SOFC Metallic Interconnects," J. Power Sources, 153 [1] 114-24 (2006). https://doi.org/10.1016/j.jpowsour.2005.03.137
- W. Quadakkers, "Compatibility of Perovskite Contact Layers between Cathode and Metallic Interconnector Plates of SOFCs," Solid State Ionics, 91 [1-2] 55-67 (1996). https://doi.org/10.1016/S0167-2738(96)00425-0
-
D. P. Lim, D. S. Lim, J. S. Oh, and I. W. Lyo, "Influence of Post-treatments on the Contact Resistance of Plasma- Sprayed
$La_{0.8}Sr_{0.2}MnO_3$ Coating on SOFC Metallic Interconnector," Surf. Coatings Technol., 200 [5-6] 1248-51 (2005). https://doi.org/10.1016/j.surfcoat.2005.08.131 - J. J. Choi, D. S. Park, B. D. Hahn, J. Ryu, and W. H. Yoon, "Oxidation Behavior of Ferritic Steel Alloy Coated with Highly Dense Conducting Ceramics by Aerosol Deposition," J. Am. Ceram. Soc., 91 [8] 2601-6 (2008). https://doi.org/10.1111/j.1551-2916.2008.02506.x
- J. J. Choi, J. Ryu, B. D. Hahn, W. H. Yoon, B. K. Lee, J. H. Choi, and D. S. Park, "Ni-containing Conducting Ceramic as an Oxidation Protective Coating on Metallic Interconnects by Aerosol Deposition," J. Am. Ceram. Soc., 1618 1614-18 (2010).
- C. S. Ni, D. F. Zhang, C. Y. Ni, and Z. M. Wang, "Ruddlesden- Popper Nickelate as Coating for Chromia-forming Stainless Steel," Int. J. Hydrogen Energy, 39 13314-19 (2014). https://doi.org/10.1016/j.ijhydene.2014.06.147
- W. Z. Zhu and S. C. Deevi, "Opportunity of Metallic Interconnects for Solid Oxide Fuel Cells: A Status on Contact Resistance," Mater. Res. Bull., 38 [6] 957-72 (2003). https://doi.org/10.1016/S0025-5408(03)00076-X
-
P. Odier, M. Municken, M. Crespin, F. Dubois, P. Mouron, and J. Choisnet, "Sol-gel Synthesis and Structural Characterisation of the Perovskite Type Pseudo Solid Solution
$LaNi_{0.5}Cu_{0.5}O_3$ ," J. Mater. Chem., 12 [5] 1370-73 (2002). https://doi.org/10.1039/b200034m -
M. Bevilacqua, T. Montini, C. Tavagnacco, G. Vicario, P. Fornasiero, and M. Graziani, "Influence of Synthesis Route on Morphology and Electrical Properties of
$LaNi_{0.6}Fe_{0.4}O_3$ ," Solid State Ionics, 177 [33-34] 2957-65 (2006). https://doi.org/10.1016/j.ssi.2006.08.018 - R. D. Shannon, "Revised Effective Ionic Radii and Systematic Studies of Interatomic Distances in Halides and Chalcogenides," Acta Cryst., A32 751-67 (1976).
- Y. Zhang, A. Javed, M. Zhou, S. Liang, and P. Xiao, "Fabrication of Mn-Co Spinel Coatings on Crofer 22 APU Stainless Steel by Electrophoretic Deposition for Interconnect Applications in Solid Oxide Fuel Cells," Int. J. Appl. Ceram. Technol., 11 [2] 332-41 (2014). https://doi.org/10.1111/ijac.12013
-
B. K. Park, J. W. Lee, S. B. Lee, T. H. Lim, S. J. Park, C. O. Park, and R. H. Song, "Cu- and Ni-Doped
$Mn_{1.5}Co_{1.5}O_4 $ Spinel Coatings on Metallic Interconnects for Solid Oxide Fuel Cells," Int. J. Hydrogen Energy, 38 [27] 12043-50 (2013). https://doi.org/10.1016/j.ijhydene.2013.07.025 -
R. Chiba, F. Yoshimura, and Y. Sakurai, "An Investigation of
$LaNi_{1-x}Fe_xO_3$ as a Cathode Material for Solid Oxide Fuel Cells," Solid State Ionics, 124 [3] 281-88 (1999). https://doi.org/10.1016/S0167-2738(99)00222-2 - E. Bucher and W. Sitte, "Defect Chemical Analysis of the Electronic Conductivity of Strontium-substituted Lanthanum Ferrite," Solid State Ionics, 173 [1-4] 23-28 (2004). https://doi.org/10.1016/j.ssi.2004.07.047
-
K. Park, J. S. Son, S. I. Woo, K. Shin, M. W. Oh, S. D. Park, and T. Hyeon, "Colloidal Synthesis and Thermoelectric Properties of La-doped
$SrTiO_3$ Nanoparticles," J. Mater. Chem. A, 2 [12] 4217-24 (2014). https://doi.org/10.1039/c3ta14699e -
J. Y. Tak, S. M. Choi, W. S. Seo, and H. K. Cho, "Thermoelectric Properties of a Doped
$LaNiO_3$ Perovskite System Prepared Using a Spark-plasma Sintering Process," Electron. Mater. Lett., 9 [4] 513-16 (2013). https://doi.org/10.1007/s13391-013-0034-0 - Y. Xu, Z. Wen, S. Wang, and T. Wen, "Cu Doped Mn-Co Spinel Protective Coating on Ferritic Stainless Steels for SOFC Interconnect Applications," Solid State Ionics, 192 [1] 561-64 (2011). https://doi.org/10.1016/j.ssi.2010.05.052
Cited by
- Perovskite Coatings on Metallic Interconnects for Solid Oxide Fuel Cells vol.163, pp.10, 2016, https://doi.org/10.1149/2.1171610jes
- Applying multifunctional perovskite LaNiO3 as electrolyte and anode for low‐temperature solid oxide fuel cell vol.32, pp.4, 2021, https://doi.org/10.1007/s10854-020-05164-y