Structural Engineering and Mechanics

  • 제56권4호
  • /
  • Pages.695-705
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental investigations on the structural behaviour of a distressed bridge

  • Dar, M.A. (Department of Civil Engineering, MSRIT) ;
  • Subramanian, N. (Consulting Engineer) ;
  • Dar, A.R. (Department of Civil Engineering, NIT Srinagar) ;
  • Raju, J. (Department of Civil Engineering, MSRIT)
  • 투고 : 2015.08.08
  • 심사 : 2015.11.09
  • 발행 : 2015.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

Distressed structures require necessary remedial measures in order to restore their original structural properties like strength and stiffness. Validating the effectiveness of the proposed qualitative remedial measure experimentally is of utmost importance as there is no well-established analytical method to verify the effectiveness of the same quantitatively. Prototype testing which would have been the best option for this purpose would not only prove costly but also be associated with numerous practical difficulties; hence model testing is resorted as the only option for the purpose. This paper presents one such typical experimental study on the structural behavior of a distressed bridge, mainly observed in the form of prominent tilt in the bearing plate in transverse and longitudinal direction on downstream side. The main focus of the proposed experimental investigation is to assess the structural behavior particularly the load carrying capacity. The extent of deformation of some models with specific structural arrangements and some models with specific need based remedial measures were also studied. This study also assessed the contribution of each remedial measure towards restoration individually and collectively.

키워드

참고문헌

  1. AASHTO (American Association of State Highway and Transportation Officials) (2011) Case Studies on the Rehabilitation of Historic Bridges.
  2. Arya, A.S., Thakkar, S.K. and Bakir S.M. (1992), "Retrofitting of an earthquake damaged bridge", Tenth World Conference in Earthquake Engineering, Madrid, July.
  3. Caglayan, O., Ozakgul, K. and Tezer, O. (2012), "Assessment of existing steel railway bridges", J. Constr. Steel Res., 69(1), 54-63. https://doi.org/10.1016/j.jcsr.2011.08.001
  4. Edward Zhou, Y., Beecher, J.B., Guzda, M.R. and Cunningham, D.R. (2014), "Investigation and retrofit of distortion-induced fatigue cracks in a double-deck cantilever-suspended steel truss bridge", J. Struct. Eng., 141(1), D4014011.
  5. Ganesan, T.P. (2005), Model Analysis of Structures, 2nd Edition, Universities Press.
  6. Goel, R.K. and Sanyal, A.K. (1999), "Rehabilitation of distressed road over bridge at FirozpurCantt-a case study", IIBE Seminar, Vigyan Bhawan, New Delhi.
  7. Hatfield, F.J. (2001), Engineering for Rehabilitation of Historic Metal Truss Bridges, Welding Innovation, XVIII(3).
  8. Hibbeler, R.C. (2008), Structural Analysis, 6th Edition, Prentice Hall.
  9. IS 800 (2007), Indian Standard Code of Practice for General Construction in Steel, Bureau of Indian Standards, New Delhi.
  10. Jagadish, R. (1995), Structural Failures - Case Histories, Oxford & IBH Publishing Co., New Delhi.
  11. Lima1, K., Robson, N., Oosterhof, S., Kanji, S., DiBattista, J. and Montgomery, C.J. (2008), "Rehabilitation of a 100-Year-Old Steel Truss Bridge", CSCE Annual Conference, Quebec, June.
  12. McKeel, W.T. Jr., Miller, A.B., Clark, K.S., Saufley, R.W. Jr., Bushman, W.H. and Lester, T.F. (2006), "Best Practices for the Rehabilitation and Moving of Historic Metal Truss Bridges", Virginia Transportation Research Council, Final Report VTRC 06-R31.
  13. Mehta, S. (2010), "Evaluation and retrofit issues for steel truss bridges in Eastern United States", Bridge Eng., ASCE, 15(5), 581-96. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000086
  14. Peterson, F.J. (2011), "The rehabilitation alternative Huey P. Long Bridge- case study", Bridge Engineering Program, University of Buffalo.
  15. Subramanian, N. (2014), "The failures that changed the perception of our designs", Bridge Struct. Eng., J. ING/IABSE, 44(4), 29-51.
  16. Thakkar, S.K. (2008), "Retrofitting techniques for bridges and flyovers", New Build. Mater. Constr. World, 13(9), 180-192.
  17. Kumar, R., Ghanekar, V.K., Sahu, G.K., Pandey, A.K., Rao, M.V.B., Sharma, S.K. and Rao, V.V.L.K. (1999), "Structural integrity and rehabilitation of Khalghat Bridge", Bridge Struct. Eng., J. ING/IABSE, 29(1), March.
  18. SP 6(1)-1964, Handbook for Structural Engineers, Bureau of Indian Standards, New Delhi.
  19. Schodek, D.L. (2000), Structures, 4th Edition, Prentice Hall.
  20. Stamatopoulos, G.N. (2013), "Fatigue assessment and strengthening measures to upgrade a steel railway bridge", J. Constr. Steel Res., 80, 346-354. https://doi.org/10.1016/j.jcsr.2012.10.004
  21. Subramanian, N. (2008), Design of Steel Structures, Oxford University Press, New Delhi.
  22. Subramanian, N. (2014), "Codification and methods to improve the process", Bridge Struct. Eng., J. ING/IABSE, 44(2), 1-12.
  23. Williams, W. (2013), "Retrofit bridge rail design and testing for a historic Texas Steel Truss Bridge", Tran. Res. Record: J. Tran. Res. Board, 2377, 29-37. https://doi.org/10.3141/2377-04

피인용 문헌

  1. Behaviour of partly stiffened cold-formed steel built-up beams: Experimental investigation and numerical validation pp.2048-4011, 2018, https://doi.org/10.1177/1369433218782767
  2. Rehabilitation of a distressed steel roof truss - A study vol.62, pp.5, 2017, https://doi.org/10.12989/sem.2017.62.5.567
  3. Structural performance of cold-formed steel composite beams vol.27, pp.5, 2015, https://doi.org/10.12989/scs.2018.27.5.545
  4. Strengthening of capacity deficient RC beams - An experimental approach vol.70, pp.3, 2015, https://doi.org/10.12989/sem.2019.70.3.303
  5. Effect of angle stiffeners on the flexural strength and stiffness of cold-formed steel beams vol.33, pp.2, 2019, https://doi.org/10.12989/scs.2019.33.2.225
  6. Behaviour of stiffened cold-formed steel beams-An experimental study vol.27, pp.p1, 2015, https://doi.org/10.1016/j.matpr.2019.11.111
  7. Nonlinear flexural behaviour of efficient profiled cold-formed steel cross-sections vol.27, pp.p1, 2015, https://doi.org/10.1016/j.matpr.2019.11.116
  8. Flexural Strength of cold-formed steel built-up composite beams with rectangular compression flanges vol.34, pp.2, 2015, https://doi.org/10.12989/scs.2020.34.2.171
  9. Efficient cross-sectional profiling of built up CFS beams for improved flexural performance vol.34, pp.3, 2015, https://doi.org/10.12989/scs.2020.34.3.333
  10. Performance evaluation of different strengthening measures for exterior RC beam-column joints under opening moments vol.74, pp.2, 2020, https://doi.org/10.12989/sem.2020.74.2.243
  11. Behavior of CFS built-up battened columns: Parametric study and design recommendations vol.74, pp.3, 2015, https://doi.org/10.12989/sem.2020.74.3.381
  12. Retrofitting of Hot-Rolled Steel Channels Using CFS Sections: Experimental Study and Flexural Behavior vol.25, pp.4, 2015, https://doi.org/10.1061/(asce)sc.1943-5576.0000526
  13. Seismic study of a widened and reconstructed long-span continuous steel truss bridge vol.17, pp.2, 2015, https://doi.org/10.1080/15732479.2020.1733621
  14. Development of an efficient steel truss system using CFS sections: a comparative study with a hot-rolled steel truss vol.12, pp.6, 2015, https://doi.org/10.1108/ijsi-06-2020-0060