DOI QR코드

DOI QR Code

Design and Manufacture of a Hand-made Vehicle Based on a Formula

포뮬러 형태의 자작자동차 설계 및 제작

  • Lee, Soo Jin (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • Jeong, Wonsun (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • Kim, Geunbi (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • Kim, Seong Keol (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology)
  • Received : 2015.08.27
  • Accepted : 2015.09.21
  • Published : 2015.10.15

Abstract

A hand-made vehicle with a formula (VF-1) was designed and manufactured with the aim of realizing a lightweight and high-performance vehicle. The driver's body weight and stiffness of the frame were considered. The vehicle was equipped with a one-cylinder Exiv 250 engine with intake manifold potting for realizing weight reduction, high performance, and low cost. The suspension system for the formula was designed through the analyses and tests of vehicle motion and equipment. In a steering system, anti-Ackerman geometry was introduced to increase the transverse force during cornering. A full electric paddle shift system was adopted to decrease the braking distance. For protection against the distortion and warping of the frame, tungsten inert gas (TIG) welding technology was used.

Keywords

References

  1. Lim, W. S., 2013, Lecture note: Chassis Design, Seoul National University of Science and Technology.
  2. Lim, W. S., 2013, Lecture note: Vehicle Dynamics, Seoul National University of Science and Technology.
  3. Kim, H. Y., 1997, Suspension System of Vehicle, Adtech, Republic of Korea.
  4. Kim, J. H., 2009, Hi-tech Chassis of Vehicle, Goldenbell, Republic of Korea.
  5. Cho, D. I., Choi, W. S., Kim, J. T., Kim, H. T., Kim, T. Y., Park, S. H., Park, H. J., Kim, H. K., 2013, MIP F-600 MF-9s Design Report, Seoul National University of Science and Technology, Republic of Korea.
  6. KR Motors , n.d, viewed 20 May 2014,.
  7. DAELIM Motorcycle, n.d, viewed 22 May 2014, .
  8. NAVER, n.d, viewed 2 June 2014, .
  9. Wikipedia, n.d, viewed 13 June 2014, .
  10. James M. G. and Barry J. G., 2012, Mechanics of Materials, Cengage Learning Inc.
  11. Wikipedia, n.d, viewed 1 July 2014, .
  12. Milliken, W. F. and Milliken, D. L., 2007, Race car Vehicle Dynamics, Society of Automotive Engineers Inc.
  13. Smith, C., 1979, Tune to Win :The Art and Science of Race Car Development and Tuning, Aero Publishers Inc.

Cited by

  1. 포뮬러 형태 자작자동차의 경량화 및 주행 성능 향상을 위한 최적설계에 관한 연구 vol.18, pp.10, 2015, https://doi.org/10.5762/kais.2017.18.10.725