DOI QR코드

DOI QR Code

Parameters affecting the fundamental period of infilled RC frame structures

  • Asteris, Panagiotis G. (Computational Mechanics Laboratory, School of Pedagogical and Technological Education) ;
  • Repapis, Constantinos C. (Department of Civil Engineering, Piraeus University of Applied Sciences) ;
  • Tsaris, Athanasios K. (Computational Mechanics Laboratory, School of Pedagogical and Technological Education) ;
  • Di Trapani, Fabio (Department of Civil, Environmental, Aerospace and Materials Engineering (DICAM), University of Palermo) ;
  • Cavaleri, Liborio (Department of Civil, Environmental, Aerospace and Materials Engineering (DICAM), University of Palermo)
  • 투고 : 2015.06.08
  • 심사 : 2015.07.31
  • 발행 : 2015.11.25

초록

Despite the fact that the fundamental period appears to be one of the most critical parameters for the seismic design of structures according to the modal superposition method, the so far available in the literature proposals for its estimation are often conflicting with each other making their use uncertain. Furthermore, the majority of these proposals do not take into account the presence of infills walls into the structure despite the fact that infill walls increase the stiffness and mass of structure leading to significant changes in the fundamental period numerical value. Toward this end, this paper presents a detailed and indepth analytical investigation on the parameters that affect the fundamental period of reinforce concrete structure. The calculated values of the fundamental period are compared against those obtained from the seismic code and equations proposed by various researchers in the literature. From the analysis of the results it has been found that the number of storeys, the span length, the stiffness of the infill wall panels, the location of the soft storeys and the soil type are crucial parameters that influence the fundamental period of RC buildings.

키워드

참고문헌

  1. AFPS-90 (1990), Recommendations for the redaction of rules relative to the structures and installation built in regions prone to earthquakes, France Association of Earthquake Engineering, Paris, France.
  2. Agrawal, R. and Hora, M.S. (2012), "Nonlinear interaction behaviour of infilled frame-isolated footings-soil system subjected to seismic loading", Struct. Eng. Mech., 44(1), 85-107. https://doi.org/10.12989/sem.2012.44.1.085
  3. Algerian Seismic Code (1988), Algerian Earthquake Resistance Regulations, Ministry of Town-planning and Construction, Algiers, Algeria.
  4. Al-Nimry, H., Resheidat, M. and Al-Jamal, M. (2014), "Ambient vibration testing of low and medium rise infilled RC frame buildings in Jordan", Soil Dyn. Earthq. Eng., 59, 21-29. https://doi.org/10.1016/j.soildyn.2014.01.002
  5. Amanat, K.M. and Hoque, E. (2006), "A rationale for determining the natural period of RC building frames having infill", Eng. Struct., 28(4), 495-502. https://doi.org/10.1016/j.engstruct.2005.09.004
  6. American Society of Civil Engineers (ASCE) (2010), Minimum design loads for buildings and other structures: ASCE Standard ASCE/SEI 7-10, Reston, Virginia.
  7. Applied Technology Council (ATC) (1978), "Tentative Provision for the development of seismic regulations for buildings", Report No. ATC3-06, Applied Technology Council, California.
  8. Arslan, M.E. and Durmus, A. (2014), "Modal parameter identification of in-filled RC frames with low strength concrete using ambient vibration", Struct. Eng. Mech., 50(2), 137-149. https://doi.org/10.12989/sem.2014.50.2.137
  9. Asteris, P.G. (2003), "Lateral stiffness of brick masonry infilled plane frames", J. Struct. Eng., ASCE, 129(8), 1071-1079. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1071)
  10. Asteris, P.G. (2005), "Closure to "Lateral stiffness of brick masonry infilled plane frames", Ed. P.G. Asteris, J. Struct. Eng., ASCE, 131(3), 523-524. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(523)
  11. Asteris, P.G. (2008), "Finite element micro-modeling of infilled frames", Electro. J. Struct. Eng., 8(8), 1-11.
  12. Asteris, P.G., Antoniou, S.T., Sophianopoulos, D.S. and Chrysostomou, C.Z. (2011), "Mathematical macromodeling of infilled frames: State of the art", J. Struct. Eng., ASCE, 137(12), 1508-1517. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000384
  13. Asteris, P.G., Cotsovos, D.M., Chrysostomou, C.Z., Mohebkhah, A. and Al-Chaar, G.K. (2013)."Mathematical micromodeling of infilled frames: State of the art", Eng. Struct., 56, 1905-1921. https://doi.org/10.1016/j.engstruct.2013.08.010
  14. Bureau of Indian Standards (2002), IS-1893, Indian Standard Criteria for Earthquake Resistant Design of Structures-Part 1: General Provisions and Buildings, Fifth Revision, New Delhi, India.
  15. Campione, G., Cavaleri, L., Macaluso, G., Amato, G. and Di Trapani, F. (2014), "Evaluation of infilled frames: an updated in-plane-stiffness macro-model considering the effects of vertical loads", Bull. Earthq. Eng., 13(8), 2265-2281. https://doi.org/10.1007/s10518-014-9714-x
  16. Cavaleri, L. and Di Trapani, F. (2014), "Cyclic response of masonry infilled RC frames: Experimental results and simplified modelling", Soil Dyn. Earthq. Eng., 65, 224-242. https://doi.org/10.1016/j.soildyn.2014.06.016
  17. Cavaleri, L. and Di Trapani, F. (2015), "Prediction of the additional shear action on frame members due to infills", Bull. Earthq. Eng., 13(5), 1425-1454. https://doi.org/10.1007/s10518-014-9668-z
  18. Cavaleri, L. and Papia, M. (2003) "A new dynamic identification technique: application to the evaluation of the equivalent strut for infilled frames", Eng. Struct., 25(7), 889-901. https://doi.org/10.1016/S0141-0296(03)00023-3
  19. Cavaleri, L. and Papia, M. (2014), "An output-only stochastic parametric approach for the identification of linear and nonlinear structures under random base excitations: Advances and comparisons", Prob. Eng. Mech., 35, 11-21. https://doi.org/10.1016/j.probengmech.2013.10.010
  20. Cavaleri, L., Fossetti, M. and Papia, M. (2005), "Infilled frames: developments in the evaluation of cyclic behaviour under lateral loads", Struct. Eng. Mech., 21(4), 469-494. https://doi.org/10.12989/sem.2005.21.4.469
  21. Chopra, A.K. and Goel, R.K. (2000), "Building period formulas for estimating seismic displacements", Earthq. Spectra, 16(2), 533-536. https://doi.org/10.1193/1.1586125
  22. Chrysostomou, C.Z. (1991), "Effects of degrading infill walls on the nonlinear seismic response of twodimensional steel frames", Ph.D. Dissertation, Cornell University, Ithaca, NY.
  23. Chrysostomou, C.Z. and Asteris, P.G. (2012), "On the in-plane properties and capacities of infilled frames", Eng. Struct., 41, 385-402. https://doi.org/10.1016/j.engstruct.2012.03.057
  24. Chrysostomou, C.Z., Gergely, P. and Abel, J.F. (2002), "A six-strut model for nonlinear dynamic analysis of steel infilled frames", Int. J. Struct. Stabil. Dyn., 2(3), 335-353. https://doi.org/10.1142/S0219455402000567
  25. Crisafulli, F.J. (1997), "Seismic behaviour of reinforced concrete structures with masonry infills", Ph.D. Dissertation, University of Canterbury, New Zealand.
  26. Crowley, H. and Pinho, R. (2004), "Period-height relationship for existing European reinforced concrete buildings", J. Earthq. Eng., 8(1), 93-119.
  27. Crowley, H. and Pinho, R. (2006), "Simplified equations for estimating the period of vibration of existing buildings", Proceedings of the First European Conference on Earthquake Engineering and Seismology, Geneva.
  28. Crowley, H. and Pinho, R. (2010), "Revisiting Eurocode 8 formulae for periods of vibration and their employment in linear seismic analysis", Earthq. Eng. Struct. Dyn., 39(2), 223-235. https://doi.org/10.1002/eqe.949
  29. D.M. LL. PP. (2008), 14 Gennaio, Nuove norme tecniche per le costruzioni, Italy.
  30. Dhanasekar, M. and Page, A.W. (1986), "Influence of brick masonry infill properties on the behaviour of infilled frames", Proceedings of the Institution of Civil Engineers, London.
  31. Ditommaso, R., Vona, M., Gallipoli, M.R. and Mucciarelli, M. (2013), "Evaluation and considerations about fundamental periods of damaged reinforced concrete buildings", Natl. Haz. Earth Syst. Sci., 13(7), 1903-1912. https://doi.org/10.5194/nhess-13-1903-2013
  32. E.A.K. (2003), Greek Earthquake Resistant Design Code, Earthquake Design and Protection Organization (OASP) and Technical Chamber of Greece (TEE), Athens.
  33. Egyptian Seismic Code (1988), Regulations for Earthquake Resistant Design of Buildings in Egypt, Egyptian Society for Earthquake Engineering, Cairo, Egypt.
  34. Eleftheriadou, A.K. and Karabinis, A.I. (2013), "Correlation of structural seismic damage with fundamental period of RC buildings", Open J. Civ. Eng., 3(01), 45-67. https://doi.org/10.4236/ojce.2013.31006
  35. Erdolen, A. and Dorana, B. (2012), "Interval finite element analysis of masonry-infilled walls", Struct. Eng. Mech., 44(1), 73-84. https://doi.org/10.12989/sem.2012.44.1.073
  36. European Committee for Standardization CEN (2004), Eurocode 8: Design of Structures for Earthquake Resistance - Part 1: General Rules, Seismic Actions and Rules for Buildings, EuropeanStandard EN 1998-1:2004.
  37. FEMA-274 (1997), NEHRP Commentary on the Guidelines for the Seismic Rehabilitation of Buildings, Washington (DC), Federal Emergency Management Agency.
  38. FEMA-306 (1998), Evaluation of earthquake damaged concrete and masonry wall buildings: basic procedures manual, Washington (DC), Federal Emergency Management Agency.
  39. FEMA-356 (2000), Prestandard and commentary for the Seismic Rehabilitation of Buildings, Washington (DC), Federal Emergency Management Agency.
  40. FEMA-450 (2003), NEHRP recommended provisions for seismic regulations for new buildings and other structures, Part 1: Provisions, Washington (DC), Federal Emergency Management Agency.
  41. Goel, R.K. and Chopra, A.K (1997), "Period formulas for moment-resisting frame buildings", J. Struct. Eng., ASCE, 123(11), 1454-1461. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1454)
  42. Guler, K., Yuksel, E. and Kocak, A. (2008), "Estimation of the fundamental vibration period of existing RC buildings in Turkey utilizing ambient vibration records", J. Earthq. Eng., 12(S2), 140-150. https://doi.org/10.1080/13632460802013909
  43. Hatzigeorgiou, G.D. and Kanapitsas, G. (2013), "Evaluation of fundamental period of low-rise and mid-rise reinforced concrete buildings", Earthq. Eng. Struct. Dyn., 42(11), 1599-1616. https://doi.org/10.1002/eqe.2289
  44. Hetenyi, M. (1946), "Beams on elastic foundations", University of Michigan Press, Ann Arbor.
  45. Holmes, M. (1961), "Steel frames with brickwork and concrete infilling", Proceedings of the Institution of Civil Engineers, London.
  46. Hong, L.L. and Hwang, W.L. (2000), "Empirical formula for fundamental vibration periods of reinforced concrete buildings in Taiwan", Earthq. Eng. Struct. Dyn., 29(3), 326-333.
  47. Hora, M. (2006), "Nonlinear interaction analysis of infilled building frame-soil system", J. Struct. Eng. (Madras), 33(4), 309-318.
  48. Internal Conference of Building Officials (1997), Uniform Building Code, California, Wilier.
  49. Israel IC-413 (1994), SI 413 Design provision for Earthquake Resistant of structures, Standard Institute of Israel 1988.
  50. Jordanian National Building Council (2005), Jordanian National Building Code for Earthquake-Resistant Buildings, Amman, Jordan.
  51. Kakaletsis, D.J. and Karayannis, C.G. (2009), "Experimental investigation of infilled reinforced concrete frames with openings", ACI Struct. J., 106(2), 132-141.
  52. Kose, M.M. (2009), "Parameters affecting the fundamental period of RC buildings with infill walls", Eng. Struct., 31(1), 93-102. https://doi.org/10.1016/j.engstruct.2008.07.017
  53. Kose, M.M. and Kayadelen, C. (2013), "Effects of infill walls on RC buildings under time history loading using genetic programming and neuro-fuzzy", Struct. Eng. Mech., 47(3), 401-419. https://doi.org/10.12989/sem.2013.47.3.401
  54. LH logismiki (2013), FESPA 10 for windows, v.5.4.0.100. Athens, Greece.
  55. Mainstone, R.J. (1971), "On the stiffnesses and strengths of infilled frames", Proceedings of the Institution of Civil Engineers, London.
  56. Mainstone, R.J. (1974), "Supplementary note on the stiffness and strengths of infilled frames", Current Paper CP 13/74, Building Research Station, Garston, Watford, U.K.
  57. Mainstone, R.J. and Weeks, G.A. (1970), "The influence of bounding frame on the racking stiffness and strength of brick walls", Proceedings of the 2nd International Brick Masonry Conference, Building Research Establishment, Watford, England.
  58. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  59. Martinez-Rueda, J.E. and Elnashai, A.S. (1997), "Confined concrete model under cyclic load", Mater. Struct., 30(3), 139-147. https://doi.org/10.1007/BF02486385
  60. Massumi, A. and Moshtagh, E. (2010), "A new damage index for RC buildings based on variations of nonlinear fundamental period", Struct. Des. Tall Spec. Build., 22(1), 50-61. https://doi.org/10.1002/tal.656
  61. Mehrabi, A.B., Shing, P.B., Schuller, M. and Noland, J. (1966), "Experimental evaluation of masonryinfilled RC frames", J. Struct. Eng., ASCE, 122(3), 228-237. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(228)
  62. Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending", Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, International Association for Bridge and Structural Engineering, Zurich, Switzerland.
  63. Misir, I.S., Ozcelik, O., Girgin, S.C. and Kahraman, S. (2012), "Experimental work on seismic behavior of various types of masonry infilled RC frames", Struct. Eng. Mech., 44(6), 763-774. https://doi.org/10.12989/sem.2012.44.6.763
  64. Moghaddam, H.A. (2004), "Lateral load behavior of masonry infilled steel frames with repair and retrofit", J. Struct. Eng., ASCE, 130(1), 56-63. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(56)
  65. Moghaddam, H.A. and Dowling, P.J. (1987), "The state of the art in infilled frames", ESEE Research Report No. 87-2, Imperial College of Science and Technology, Civil Engineering Department, London, UK.
  66. National Research Council (1995), The National Building Code (NBC), Canada.
  67. New Zealand Society of Earthquake Engineering (NZSEE) (2006), Assessment and improvement of the structural performance of buildings in earthquakes, Recommendations of a NZSEE Study Group on Earthquake Risk Buildings.
  68. NSCP (1992), National Structural Code of Philippines, Vol. 1, Fourth Edition, The Board of Civil Engineering of the Professional Regulation Commission, Manila, Philippines.
  69. NSR-84 (1984), Colombian Standards for Seismic Resistant Design and Construction, Bogota, Colombia.
  70. NSR-98 (1998), Colombian Standards for Seismic Resistant Design and Construction, Bogota, Colombia.
  71. Page, A.W., Kleeman, P.W. and Dhanasekar, M. (1985), "An in-plane finite element model for brick masonry", Proceedings of a session held in conjunction with Structures Congress'85, Chicago.
  72. Papia, M., Cavaleri, L. and Fossetti, M. (2003), "Infilled frames: developments in the evaluation of the stiffening effect of infills", Struct. Eng. Mech., 16(6), 675-693. https://doi.org/10.12989/sem.2003.16.6.675
  73. Pinto, A., Verzeletti, G., Molina, J., Varum, H., Pinho, R. and Coelho, E. (2002), "Pseudo-dynamic tests on non-seismic resisting RC frames (bare and selective retrofit frames)", Joint Research Centre (JRC), Ispra, Italy.
  74. Polyakov, S.V. (1960), "On the interaction between masonry filler walls and enclosing frame when loading in the plane of the wall", Translation in earthquake engineering, Earthquake Engineering Research Institute, San Francisco.
  75. Saneinejad, A. and Hobbs, B. (1995), "Inelastic design of infilled frames", J. Struct. Eng., ASCE, 121(4), 634-650. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(634)
  76. Seismic Code of Costa Rica (1986), Federal College of Engineers and Architects of Costa Rica, Department of Design, Ministry of Construction.
  77. SeismoSoft (2013), "SeismoStruct - A computer program for static and dynamic nonlinear analysis of framed structures" [online], Seismosoft Ltd., Pavia, Italy, v.6.5.200.
  78. Smith, B.S. (1962), "Lateral stiffness of infilled frames", J. Struct. Div., ASCE, 88(ST6), 183-199.
  79. Smith, B.S. (1966), "Behavior of square infilled frames", J. Struct. Div., ASCE, 92(ST1), 381-403.
  80. Smyrou, E., Blandon, C., Antoniou, S., Pinho, R. and Crisafulli, F. (2011). "Implementation and verification of a masonry panel model for nonlinear dynamic analysis of infilled RC frames", Bull. Earthq. Eng., 9(5), 1519-1534. https://doi.org/10.1007/s10518-011-9262-6
  81. Thomas, F.G. (1953), "The strength of brickwork", Struct. Eng., 31(2), 35-46.
  82. Venezuelan Seismic Code (1988), Regulations for Earthquake Resistant Buildings, Comision De Normas Industriales, Covenin, Caracas, Venezuela.
  83. Wood, R.H. (1959), "Discussion on the Stability of tall buildings", Proceedings of the Institution of Civil Engineers, 12(4), 517-518.

피인용 문헌

  1. The FP4026 Research Database on the fundamental period of RC infilled frame structures vol.9, 2016, https://doi.org/10.1016/j.dib.2016.10.002
  2. Simplified assessment of maximum interstory drift for RC buildings with irregular infills distribution along the height pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0473-y
  3. Empirical Equations for the Direct Definition of Stress–Strain Laws for Fiber-Section-Based Macromodeling of Infilled Frames vol.144, pp.11, 2018, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001532
  4. Ambient vibration testing of existing buildings: Experimental, numerical and code provisions vol.10, pp.4, 2018, https://doi.org/10.1177/1687814018772718
  5. The Theoretical Prediction of Collapse Mechanisms for Masonry-Infilled Steel Frames vol.43, pp.10, 2018, https://doi.org/10.1007/s13369-018-3235-x
  6. Fragility functions and floor spectra of RC masonry infilled frames: influence of mechanical properties of masonry infills pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0435-4
  7. Artificial bee colony-based neural network for the prediction of the fundamental period of infilled frame structures pp.1433-3058, 2019, https://doi.org/10.1007/s00521-018-03965-1
  8. Comparison and assessment of material models for simulation of infilled RC frames under lateral loads vol.71, pp.1, 2019, https://doi.org/10.14256/JCE.2307.2017
  9. Fundamental period of infilled RC frame structures with vertical irregularity vol.61, pp.5, 2015, https://doi.org/10.12989/sem.2017.61.5.663
  10. Effect of masonry infill walls with openings on nonlinear response of reinforced concrete frames vol.12, pp.3, 2015, https://doi.org/10.12989/eas.2017.12.3.333
  11. A simple approach for the fundamental period of MDOF structures vol.13, pp.3, 2015, https://doi.org/10.12989/eas.2017.13.3.231
  12. Experimental and Numerical Investigation on Seismic Performance of a Hybrid RC Frame System with Stiffened Masonry Wall vol.16, pp.12, 2015, https://doi.org/10.3151/jact.16.600
  13. Double-Leaf Infill Masonry Walls Cyclic In-Plane Behaviour: Experimental and Numerical Investigation vol.12, pp.None, 2018, https://doi.org/10.2174/1874836801812010035
  14. Fundamental periods of reinforced concrete building frames resting on sloping ground vol.14, pp.4, 2015, https://doi.org/10.12989/eas.2018.14.4.305
  15. The effect of mortar type and joint thickness on mechanical properties of conventional masonry walls vol.67, pp.6, 2018, https://doi.org/10.12989/sem.2018.67.6.579
  16. In-plane response of masonry infilled RC framed structures: A probabilistic macromodeling approach vol.68, pp.4, 2015, https://doi.org/10.12989/sem.2018.68.4.423
  17. Determination of Period of RC Buildings by the Ambient Vibration Method vol.2019, pp.None, 2015, https://doi.org/10.1155/2019/1213078
  18. Seismic Assessment of Non-conforming Infilled RC Buildings Using IDA Procedures vol.4, pp.None, 2015, https://doi.org/10.3389/fbuil.2018.00088
  19. Experimental damage evaluation of prototype infill wall based on forced vibration test vol.8, pp.2, 2015, https://doi.org/10.12989/acc.2019.8.2.077
  20. Determination of torsional irregularity in response spectrum analysis of building structures vol.74, pp.5, 2015, https://doi.org/10.12989/sem.2020.74.5.699
  21. A simplified method for estimating the fundamental period of masonry infilled reinforced concrete frames vol.74, pp.6, 2015, https://doi.org/10.12989/sem.2020.74.6.821
  22. Influence of openings of infill wall on seismic vulnerability of existing RC structures vol.75, pp.2, 2015, https://doi.org/10.12989/sem.2020.75.2.211
  23. Machine learning and nonlinear models for the estimation of fundamental period of vibration of masonry infilled RC frame structures vol.216, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2020.110765
  24. Numerical analysis of reinforced concrete frame buildings with decoupled infill walls vol.63, pp.4, 2020, https://doi.org/10.5937/grmk2004013m
  25. Determining initial damage state of confined masonry wall vol.1912, pp.1, 2021, https://doi.org/10.1088/1742-6596/1912/1/012058
  26. A novel data-driven force-displacement macro-model for nonlinear analysis of infilled frames: development, validation and reliability comparison vol.19, pp.14, 2015, https://doi.org/10.1007/s10518-021-01211-z
  27. Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading vol.318, pp.None, 2022, https://doi.org/10.1016/j.conbuildmat.2021.126041