References
- ASCE (2013), 2013 Report Card for America's Infrastructure
- FHWA (2011), Accelerated Bridge Construction Manual
- Issa, M. and Abdalla, H. (2007), Structural Behavior of Single Key Joints in Precast Concrete Segmental Bridges, J. Bridge Eng., 12(3), 315-324 https://doi.org/10.1061/(ASCE)1084-0702(2007)12:3(315)
- Shah, B., Sennah, K., Kianoush, M., Tu, S., and Lam, C. (2007), Experimental Study on Prefabricaated Concrete Bridge Girderto-Girder Intermittent Bolted Connections System, J. Bridge Eng., 12(5), 570-584 https://doi.org/10.1061/(ASCE)1084-0702(2007)12:5(570)
- Zhu, P. Ma, Z., Cao, Q., and French, C., (2012), Fatigue Evaluation of Transverse U-Bar Joint Details for Accelerated Bridge Construction, J. Bridge Eng., 17(2), 191-200 https://doi.org/10.1061/(ASCE)BE.1943-5592.0000257
- Lee, Y. H., Kim, M. S., Jung, B. N., Kim, H. C., and Kim, K. S., (2009), Experimental Study on Structural Behavior of Joints for Precast Concrete Segment, Journal of the Earthquake Engineering Society of Korea, 13(6), 59-65 https://doi.org/10.5000/EESK.2009.13.6.059
- Shin, H. S., Lee, C. H., and Park, K. T., (2012), An Experimental Study on Bending Behavior of Steel Grid Composite Deck Joint, Journal of The Korea Institute for Structural Maintenance and Inspection, 16(5), 68-77 https://doi.org/10.11112/jksmi.2012.16.5.068
- Branson, D. E., (1963/1965), Instantaneous and Time-Dependent Deflection of Simple and Continous Reinforced Concrete Beams, HPR Report, Alabama Highway Department/U.S. Bureau of public Roads, 7(1), 78-
- Al-Zaid R. Z., and Al-Shaikh A. H., and Abu-Hussein, M., M. (1991), Effect of Loading Type on the Effective Moment of Inertia of Reinforced Concrete Beams, ACI Structural Journal, 88(2), 184-190
- Al-Shaikh A. H., and Al-Zaid R. Z. (1993), Effective of Reinforcement Ratio on the Effective moment of Inertia of Reinforced Concrete Beams, ACI Structural journal, 65(9), 144-149
- Kim, W., Lee, K. Y., and Jung, S. H., (2002), Dflection in High-Strength Concrete Flexural Members, Journal of the Korean Society of Civil Engineers, 22(3-a), 631-640
- Kang, J. O., Kim, K. S., Lee, D. H., (2010), Correlation Between Crack Widths and Deflection in Reinforced Concrete Beams, Journal of The Korea Institute for Structural Maintenance and Inspection, 14(2), 184-192
- Kim, D. H, (2014) An Experimental Study on Behavior of Top Flange for a modular T Girder Concrete Bridge, master thesis, Sungkyunkwan Univ.
- Korea Concrete Institute (2012), Concrete Structure Design Code.
- Korea Road Association (2010), Korea Highway Bridge Code
- Korea Institute of Industrial Technology Evaluation and Planing (2012), Modular bridge technology development and commercialization mid report, Modular Bridge R& BD.
- Park, J. H, (2015), A Study on the Curvature of Flexural Members with Connection in Cyclic Load, master thesis, Sungkyunkwan Univ.
Cited by
- A Study on the Design of the Top Flange of a Modular T-Girder Bridge Using the Limit State Design Method vol.6, pp.12, 2016, https://doi.org/10.3390/app6120381
- An Experimental and Analytical Study on the Deflection Behavior of Precast Concrete Beams with Joints vol.7, pp.11, 2017, https://doi.org/10.3390/app7111198
- Flexural analysis of transverse joints of prefabricated T-girder bridge superstructure vol.77, pp.1, 2015, https://doi.org/10.12989/sem.2021.77.1.089