Composites Research

  • 제28권5호
  • /
  • Pages.322-326
  • /
  • 2015
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

LED 등명기 경량화를 위한 복합재료 적용 기초 연구

A Basic Study on the Application of Composite Materials for the Light-weight LED Beacon

  • 투고 : 2015.09.30
  • 심사 : 2015.10.30
  • 발행 : 2015.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서 고출력 LED를 개발하였고 등명기의 경량화 설계를 위한 복합재료의 적용에 대해 검토하였다. 복합재료의 적용을 통해 수직 변형량이 17% 감소하였고 전체중량은 알루미늄 소재 적용 대비 20% 감소에 해당하는 8.9 kg을 줄일 수 있었다. 방열 특성 측정 결과, 외기온도 $20^{\circ}C$ 조건에서 LED 패키지의 최고온도는 $63.5^{\circ}C$로 측정되었다. LED 패키지의 성능 및 수명을 고려할 때 적합한 온도 수준이다. 본 연구에서는 고출력 LED 등명기의 경량화를 위한 복합재료의 적용 가능성을 확인할 수 있었다.

We developed the high-power LED beacon and investigated the applicability of composite materials for the light-weight design of LED beacon. By means of the application of composite materials, the vertical deformation could be reduced by 17% and the total weight of LED beacon 8.9 kg comparable to 20% light-weighting against aluminum beacon. In thermal radiation test, the maximum temperature of LED package was measured to $63.5^{\circ}C$ under ambient temperature ($20^{\circ}C$), which is acceptable considering both performance and lifespan of LED packages. In this study, the applicability of composite materials was demonstrated for light-weight design of high-power LED beacon.

키워드

참고문헌

  1. Kim, J.H. and Chang, S.H., "Design of ${\mu}$-CNC Machining Centre with Carbon/epoxy Composite Aluminum Hybrid Structures Containing Friction Layers for High Damping Capacity," Composite Structures, Vol. 67, No. 1, 2007, pp. 29-44.
  2. Kim, D.I. and Chang, S.H., "Parametric Study on Design of Composite-foam Sandwich Structures for Micro EDM Machine Tool Structures," Journal of the Korean Society for Composite Materials, Vol. 19, No. 2, 2006, pp. 13-19.
  3. Chang, S.H., Lee, D.G., and Han, H.S., "Design of High Speed Composite Air Spindle System," Journal of the Korean Society for Composite Materials, Vol. 14, No. 1, 2001, pp. 47-56.
  4. Choi, J.H., "Manufacture and Performance Test of the Composite Cantilever Arm for Electrical Discharge Wire," Journal of the Korean Society for Composite Materials, Vol. 13, No. 6, 2000, pp. 39-46.
  5. Seo, J.D., Kim, H.S., Kim, J.M., Choi, J.K., and Lee, D.G., "Design and Manufacturing of Composite Machine Tool Structures for High Speed Milling Machines," Proceeding of the KSCM Annual Spring Conference 2002, Korea, May, 2002, pp. 223-226.
  6. Byun, G.S., Kim, G.H., Kim, M., and Kim, C.H., "Design and Manufacturing a Synchronous Flash of LED Marine Lantern Based on GPS-based," Journal of the Korea Institute of Information and Communication Engineering, Vol. 15, No. 5, 2012, pp. 885-891.
  7. Kim, J.T., Park, S.N., and Park, C.W., "Optical Design and Fabrication of Fresnel Lens for Marine Signal Lanterns," New physics, Vol. 53, No. 6, pt. 1, 2006, pp. 483-488.
  8. Kim, J.S. and Yoon, K.J., "Characterization of Thermal Expansion Coefficients of Carbon/epoxy Composite for Temperature Varication," New physics, Vol. 53, No. 6, pt. 1, 2006, pp. 483-488.
  9. Jeong, K.W., Park, Y.B., Choi, J.H., and Kweon, J.H., "A Study on Trends and Characteristics of LED Lantern," Proceeding of the KIEE Annual Spring Conference 2015, Kyung-ju, Korea, May. 2015, pp. 76-76.
  10. Jeong, J.H., Yu, C.H., Kim, H.J., Kim, J.K., and Ahn, J.R., "Life Cycle Characteristic for LED Marine Signal Lights," Proceeding of the KIEE Annual Spring Confference 2009, May, pp. 160-163.
  11. Lee, D.G. and Seo, N.P., Axiomatic Design and Fabrication of Composite Structures, Oxford University Press., USA, 2005.