DOI QR코드

DOI QR Code

THREE-DIMENSIONAL FLOW PHENOMENA IN A WIRE-WRAPPED 37-PIN FUEL BUNDLE FOR SFR

  • 투고 : 2015.02.25
  • 심사 : 2015.06.02
  • 발행 : 2015.10.25

초록

Three-dimensional flow phenomena in a wire-wrapped 37-pin fuel assembly mock-up of a Japanese loop-type sodium-cooled fast reactor, Monju, were investigated with a numerical analysis using a general-purpose commercial computational fluid dynamics code, CFX. Complicated and vortical flow phenomena in the wire-wrapped 37-pin fuel assembly were captured by a Reynolds-averaged Navier-Stokes flow simulation using a shear stress transport turbulence model. The main purpose of the current study is to understand the three-dimensional complex flow phenomena in a wire-wrapped fuel assembly to support the license issue for the core design. Computational fluid dynamics results show good agreement with friction factor correlation models. The secondary flow in the corner and edge subchannels is much stronger than that in an interior subchannel. The axial velocity averaged in the corner and edge subchannels is higher than that averaged in the interior subchannels. Three-dimensional multiscale vortex structures start to be formed by an interaction between secondary flows around each wire-wrapped pin. Behavior of the large-scale vortex structures in the corner and edge subchannels is closely related to the relative position between the hexagonal duct wall and the helically wrapped wire spacer. The small-scale vortex is axially developed in the interior subchannels. Furthermore, a driving force on each wire spacer surface is closely related to the relative position between the hexagonal duct wall and the wire spacer.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. E.H. Novendstern, Turbulent flow pressure drop model for fuel rod assemblies utilizing a helical wire-wrap spacer system, Nucl. Eng. Des. 22 (1972) 19-27. https://doi.org/10.1016/0029-5493(72)90058-1
  2. K. Rehme, Pressure drop correlations for fuel element spacers, Nucl. Technol. 17 (1973) 15-23. https://doi.org/10.13182/NT73-A31250
  3. F.C. Engel, R.A. Markley, A.A. Bishop, Laminar, transition and turbulent parallel flow pressure drop across wire-wrap-spaced rod bundles, Nucl. Sci. Eng. 69 (1979) 290-296. https://doi.org/10.13182/NSE79-A20618
  4. S.K. Cheng, N.E. Todreas, Hydrodynamic models and correlations for bare and wire-wrapped hexagonal rod bundlesd-bundle friction factors, sub-channel friction factors and mixing parameters, Nucl. Eng. Des. 92 (1986) 227-251. https://doi.org/10.1016/0029-5493(86)90249-9
  5. R.M. Roidt, L.J. Harper, T.G. Bartholet, Experimental determination of interior subchannel crossflow and axial flow in a model of the Clinch River Breeder Reactor fuel assembly rod bundle with wire wrap spacers, American Society of Mechanical Engineers Paper, 76-WA/HT-83.
  6. M.H. Chun, K.W. Seo, An experimental study and assessment of existing friction factor correlations for wire-wrapped fuel assemblies, Ann. Nucl. Energy 28 (2001) 1683-1695. https://doi.org/10.1016/S0306-4549(01)00023-8
  7. S.K. Choi, K. Choi, H.Y. Nam, J.H. Choi, H.K. Choi, Measurement of pressure drop in a full-scale fuel assembly of a liquid metal reactor, J. Pressure Vessel Technol. 125 (2003) 233-238. https://doi.org/10.1115/1.1565076
  8. D.S. Rowe, COBRA III-C: A Digital Computer Program for Steady State and Transient Thermal Hydraulic Analysis of Nuclear Fuel Elements, Battle Pacific Northwest Laboratories, BNWL-1695, 1973.
  9. J.D. Macdougall, J.N. Lillington, The SABRE code for fuel rod cluster thermo-hydraulics, Nucl. Eng. Des. 82 (1984) 171-190. https://doi.org/10.1016/0029-5493(84)90210-3
  10. H. Ninokata, ASFRE-III: A Computer Program for Triangular Rod Array Thermo-hydraulic Analysis of Fast Breeder Reactors, PNC Report, PNC N941 85-106, 1985.
  11. W.S. Kim, Y.G. Kim, Y.J. Kim, A subchannel analysis code MATRA-LMR for wire wrapped LMR subassembly, Ann. Nucl. Energy 29 (2002) 303-321. https://doi.org/10.1016/S0306-4549(01)00041-X
  12. I. Ahmad, K.Y. Kim, Flow and convective heat transfer analysis using RANS for a wire-wrapped fuel assembly, J. Mech. Sci. Technol. 20 (2006) 1514-1524. https://doi.org/10.1007/BF02915974
  13. R. Gajapathy, K. Velusamy, P. Selvaraj, P. Chellapandi, S.C. Chetal, CFD investigation of helical wire-wrapped 7-pin fuel bundle and the challenges in modeling full scale 217 pin bundle, Nucl. Eng. Des. 237 (2007) 2332-2342. https://doi.org/10.1016/j.nucengdes.2007.05.003
  14. C. Peniguel, I. Rupp, J. Juhel, M. Guillaud, N. Gervais, S. Rolfo, Three dimensional conjugated heat transfer analysis in sodium fast reactor wire-wrapped fuel assembly, in: Proceedings of ICAPP '09, Paper 9311, Tokyo, Japan, 2009.
  15. W. Raza, K.Y. Kim, Shape optimization of wire-wrapped fuel assembly using Kriging metamodeling technique, Nucl. Eng. Des. 238 (2008) 1332-1341. https://doi.org/10.1016/j.nucengdes.2007.10.018
  16. P.F. Fischer, A. Siegel, P. Palmiotti, Large eddy simulation of wire wrapped fuel pins I: hydrodynamics in a periodic array, in: Proceedings of M&C + SNA, Monterey, California, 2007.
  17. A.E. Perry, M.S. Chong, A description of eddying motions and flow patterns using critical-point concepts, Annu. Rev. Fluid Mech. 19 (2009) 125-155.
  18. T. Iitsuka, Y. Oki, S. Kawashima, M. Nishimura, T. Isozaki, H. Kamide, Study for subassembly porous blockage in fast breeder reactors-pre-sub-channel analysis of 37-pin bundle sodium test, PNC TN9410 98-022, 1998.
  19. J. Smagorinsky, General circulation experiments with the primitive equations. I. The basic experiment, Monthly Weather Rev. 91 (1963) 99-165. https://doi.org/10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2
  20. D.C. Wilcox, Reassessment of the scale-determining equation for advanced turbulence models, AIAA J. 26 (1998) 1299-1310.
  21. F.R. Menter, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA J. 32 (1994) 1598-1605. https://doi.org/10.2514/3.12149
  22. H. Bubelis, M. Schikorr, Review and Proposal for Best-Fit of Wire-Wrapped Fuel Bundle Friction Factor and Pressure Drop Predictions Using Various Existing Correlations, Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungs-zentren (HGF), 2008.
  23. H. Ninokata, A. Efthimiadis, N.E. Todreas, Distributed resistance modeling of wire-wrapped rod bundles, Nucl. Eng. Des. 104 (1987) 93-102. https://doi.org/10.1016/0029-5493(87)90306-2

피인용 문헌

  1. Numerical simulations for determination of minimum representative bundle size in wire wrapped tube bundles vol.322, pp.None, 2015, https://doi.org/10.1016/j.nucengdes.2017.06.038
  2. One-way coupled simulation of FIV in a 7-pin wire-wrapped fuel pin bundle vol.356, pp.None, 2015, https://doi.org/10.1016/j.nucengdes.2019.110367
  3. PIV measurement and numerical investigation on flow characteristics of simulated fast reactor fuel subassembly vol.52, pp.5, 2020, https://doi.org/10.1016/j.net.2019.10.013
  4. A multi-stage approach of simulating turbulence-induced vibrations in a wire-wrapped tube bundle for fretting wear prediction vol.109, pp.None, 2015, https://doi.org/10.1016/j.jfluidstructs.2021.103460