참고문헌
- S. W. Kim and C. T. Lee, 2006, "Environment-friendly Trivalent Chromate Treatment for Zn Electroplating", J. Korean Industrial and Engineering Chemistry, Vol. 17, No. 5, pp. 433-442.
- C. T. Lee, 2007, "Enlargement of Anti-corrosion of Zinc Plating by the Trivalent Chromium Sulfate Conversion Coating", J. Korean Industrial and Engineering Chemistry, Vol. 18, No. 3, pp. 296-302.
- M. Kim, J. J. Lee, D. Y. Kim, S. U. Park and S. C. Kwon, 2004, "The Trend of Study of Echo-Friendly Hard Trivalent Chromium Deposition", J. the Korean Institute of Surface Engineering, Vol. 37, No. 3, pp. 179-184.
- F. Deflorian, S. Rossi, L. Fedrizzi and P. L. Bonora, 2005, "EIS study of organic coating on zinc surface pretreated with environmentally friendly products", Progress in Organic Coatings, Vol. 52, No. 4, pp. 271-279.
- E. N. Michael and P. B. Gordon, 2004, "Mg-rich coatings: A new paradigm for Cr-free corrosion protection of Al aerospace alloys", J. Coatings Technology and Research, Vol. 1, No. 2, pp 69-80. https://doi.org/10.1007/s11998-004-0001-7
- G. B. Rudolph, G. Hong, M. Suhakar and W. Fariaty, 2003, "Active corrosion protection and corrosion sensing in chromate-free organic coatings", Progress in Organic Coatings, Vol. 47, Vo. 3-4, pp. 174-182.
- R. Zandi-zanda, A. Ershad-langroudia. and A. Rahimia, 2005, "Silica based organic-inorganic hybrid nanocomposite coatings for corrosion protection", Progress in Organic Coatings, Vol. 53, No. 4, pp. 286-291.
- T. P. Chou, C. Chandrasekaran, S. J. Limmer, S. Seraji, Y. Wu, M. J. Forbess, C. Nguyen and G. Z. Cao, 2001, "Organic-inorganic hybrid coatings for corrosion protection", J. Non-Crystalline Solids, Vol. 290, Vo. 2-3, pp. 153-162. https://doi.org/10.1016/S0022-3093(01)00818-3
- H. J. Kim, 1993, "Development of Anti-Finger Printed EGI Steel Sheet with High Corrosion Resistance", J. the Korean Institute of Surface Engineering, Vol. 26, No. 6, pp. 307-315.
- J. B. Bajat,, V. B. Miskovic-Stankovic, N. Bibic and D. M. Drazic, 2007, "The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel", Progress in Organic Coating, Vol. 58, No. 4, pp. 323-330.
- J. H. Steven, C. Lowe, T. M. James and F. W. John, 2005, "Migration and segregation phenomena of a silicone additive in a multilayer organic coating", Progress in Organic Coatings, Vol. 54, No. 2, pp. 104-112.
- M. L. Zheludkevich, S. I. Miranda and M. G. S. Ferreira, 2005, "Sol-gel coatings for corrosion protection of metals", J. Materials Chemistry, Vol. 15, pp. 5099-5111. https://doi.org/10.1039/b419153f
- N. W. Cho, S. H. Kim and K. T. Kim, 2000, "Silica Coating on Ai-Si Alloy by the Sol-Gel Method", RIST Research Paper, Vol.14, No. 3, pp. 358-363.
- K. W. Nam, D. W. Kim, N. S. Kim and K. Y. Seong, 2014, "Characteristic of Corrosion Resistance under Different Heat Treatment Conditions of Coated Zinc Coating Steel with Cr-Free Solution", Lecture Notes in Electrical Engineering, Vol. 282, pp. 635-643.
- K. W. Nam, J. R. Kim and C. M. Choi, 2013, "Corrosion resistance characteristics of cold rolled steel by Cr-free green organic/inorganic hybrid coating solution", J. Ocean Engineering and Technology, Vol. 27, No. 2, pp. 33-38. https://doi.org/10.5574/KSOE.2013.27.2.033
- K. W. Nam, J. R. Kim and C. M. Choi 2011, "Corrosion resistance of cold rolled steel coated organic/inorganic hybrid coating solution according to the heat treatment temperature", J. Ocean Engineering and Technology, Vol. 25, No. 6, pp. 56-59. https://doi.org/10.5574/KSOE.2011.25.6.056
- J. R. Kim, C. M. Choi and K. W. Nam, 2012, "Corrosion resistance of cold rolled carbon steel by treating organic/inorganic hybrid coating solution", Trans. Korean Soc. Mech. Eng. A, Vol. 36, No. 4, pp. 405-412. https://doi.org/10.3795/KSME-A.2012.36.4.405
- H. S. Seo, H. J. Moon, J. R. Kim, J. S. Kim, S. H. Ahn, C. K. Moon and K. W. Nam, 2010, "Corrosion resistance of galvanized iron by treating modified Si organic/inorganic hybrid coating solution", J. Ocean Engineering and Technology, Vol. 25, No. 1, pp. 32-38. https://doi.org/10.5574/KSOE.2011.25.1.032
- S. H. Seo, H. J. Moon, J. S. Kim, S. H. Ahn, C. K. Moon and K. W. Nam, 2010, "Corrosion Resistance according to the Heat Treatment Temperature of Cr-free Coating Solution on Zinc Coated Steel", J. Ocean Engineering and Technology, Vol. 24, No. 5, pp. 60-66.
- H. S. Seo, H. J. Moon, J. S. Kim, S. H. Ahn, C. K. Moon and K. W. Nam, 2010, "Corrosion Resistance of Zinc Coating Steel coated Cr-free Coating Solution according to the Heat Treatment Time", J. Ocean Engineering and Technology, Vol. 24, No. 5, pp. 67-74.
- KS D 9502, 2009, "Neutral, acetic acid and copper-accelerated acetic acid salt spray,"
- T. Nsongo and M. Gillett, 1995, "Adhesion characterization of titanium and titanium nitride thin coatings on metals using the scratch test", International J. Adhesion and Adhesives, Vol. 15, No. 3, pp. 191-196. https://doi.org/10.1016/0143-7496(95)91631-F
- ASTM D3359-09, Standard test methods for measuring adhesion by tape test.
피인용 문헌
- Corrosion Resistance of EH36 Steel for Ship by Salt Spray vol.22, pp.3, 2018, https://doi.org/10.9726/kspse.2018.22.3.044