Abstract
Purpose: The purpose of this study was to evaluate the proper axial thickness of zirconia abutment applied to implant in the anterior region. Materials and methods: Zirconia abutments were prepared at different axial wall thickness by processing pre-sintered zirconia blocks via CAD/CAM to obtain equal specimens. The abutments were each produced with a thickness of 0.5 mm (Group 1), 0.8 mm (Group 2), 1.2 mm (Group 3), or 1.5 mm (Group 4). The implant used in this study was a external connection type one (US, Osstem, Pussan, Korea) product and the zirconia abutment was prepared via replication of a cemented abutment. The crowns were prepared via CAM/CAM with a thickness of 1.5 mm and were cemented to the abutments using $RelyX^{TM}$ UniCem cement. A universal testing machine was used to apply load at 30 degrees and measure fracture strength of the zirconia abutment. Results: Fracture strength of the abutments for Group 1, Group 2, Group 3, and Group 4 were $236.00{\pm}67.55N$, $599.00{\pm}15.80N$, $588.20{\pm}33.18N$, and $97.83{\pm}98.13N$, respectively. Group 1 showed a significantly lower value, as compared to the other groups (independent Mann-Whitney U-test. P<.05). No significant differences were detected among Group 2, Group 3, and Group 4 (independent Mann-Whitney U-test. P>.05). Conclusion: Zirconia abutment requires optimal thickness for fracture resistance. Within the limitation of this study, > 0.8 mm thickness is recommended for zirconia abutment in anterior implants.
목적: 이 실험의 목적은 전치부 임플란트에 적용되는 지르코니아 지대주의 적절한 축벽의 두께를 평가하는 것이었다. 재료 및 방법: 시편들은 4가지의 서로 다른 두께로 제작되었으며, 일정하게 제작하고자 CAD/CAM 시스템을 이용하여 소결전 지르코니아 블록을 가공한 후 소결하였다. 가공된 시편들은 두께에 따라 Group 1 (0.5 mm), Group 2 (0.8 mm), Group 3 (1.0 mm), Group 4 (1.2 mm)의 4가지 그룹으로 분류되었다. 임플란트 시스템은 외부연결형(US, Osstem, Pussan, Korea) 을 이용하였다. 지대주 시편들은 시멘트 유지형 지대주를 복제하여 제작되었다. 크라운은 1.5 mm 의 두께로 CAD/CAM을 이용하여 제작되었다. 제작된 지대주 시편들을 임플란트에 고정시킨 후 레진시멘트(RelyXTM UniCem, 3M ESPE AG, Seefeld, Germany)를 이용하여 크라운을 합착하였다. 지르코니아 지대주의 파절을 측정하기 위해 만능시험기로 임플란트 장축에 30도의 각도로 힘을 가하였다. 결과: Group 1, Group 2, Group 3와 Group 4의 파절강도는 각각 $236.00{\pm}67.55N$, $599.00{\pm}15.80N$, $588.20{\pm}33.18N$, $97.83{\pm}98.13N$이었다. Group 1이 다른 그룹에 비해 통계학적으로 유의성 있게 낮은 강도를 보여주었다(independent Mann-Whitney U-test, P<.05). 나머지 Group 2, Group 3와 Group 4는 서로 통계학적으로 유의성을 보여주지 않았다(independent Mann-Whitney U-test, P>.05). 결론: 지르코니아 지대주는 파절에 저항하기 위해 적절한 두께를 필요로 한다. 이 실험의 결과로 판단할 때, 지르코니아 지대주가 전치부 임플란트에 적용되기 위해서는 0.8 mm 이상의 두께를 가져야 된다고 추천된다.