DOI QR코드

DOI QR Code

Predicting the axial load capacity of high-strength concrete filled steel tubular columns

  • Aslani, Farhad (Centre for Infrastructure Engineering and Safety, The University of New South Wales) ;
  • Uy, Brian (Centre for Infrastructure Engineering and Safety, The University of New South Wales) ;
  • Tao, Zhong (Institute for Infrastructure Engineering, Western Sydney University) ;
  • Mashiri, Fidelis (Institute for Infrastructure Engineering, Western Sydney University)
  • 투고 : 2014.10.31
  • 심사 : 2015.05.21
  • 발행 : 2015.10.25

초록

The aim of this paper is to investigate the appropriateness of current codes of practice for predicting the axial load capacity of high-strength Concrete Filled Steel Tubular Columns (CFSTCs). Australian/New Zealand standards and other international codes of practice for composite bridges and buildings are currently being revised and will allow for the use of high-strength CFSTCs. It is therefore important to assess and modify the suitability of the section and ultimate buckling capacities models. For this purpose, available experimental results on high-strength composite columns have been assessed. The collected experimental results are compared with eight current codes of practice for rectangular CFSTCs and seven current codes of practice for circular CFSTCs. Furthermore, based on the statistical studies carried out, simplified relationships are developed to predict the section and ultimate buckling capacities of normal and high-strength short and slender rectangular and circular CFSTCs subjected to concentric loading.

키워드

과제정보

연구 과제번호 : The behaviour and design of composite columns coupling the benefits of high-strength steel and high-strength concrete for large scale infrastructure

연구 과제 주관 기관 : Australian Research Council

참고문헌

  1. American Concrete Institute (ACI) (2005), Building code requirements for structural concrete and commentary, ACI 318-05; Farmington Hills, MI, USA.
  2. American Concrete Institute (ACI) (2008), Building code requirements for structural concrete and commentary, ACI 318-08; Farmington Hills, MI, USA.
  3. American Institute of Steel Construction (ANSI/AISC 360-05) (2005), "Specification for structural steel buildings", Chicago, Illinois, USA.
  4. American Institute of Steel Construction (ANSI/AISC 360-10) (2010), Specification for Structural Steel Buildings, An American National Standard.
  5. Architectural Institute of Japan (AIJ) (2001), Recommendations for design and construction of concrete filled steel tubular structures, Japan. [In Japanese]
  6. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Behaviour and design of composite columns incorporating compact high-strength steel plates", J. Constr. Steel Res., 107, 94-110. https://doi.org/10.1016/j.jcsr.2015.01.005
  7. CECS 28:90 (1992), Specification for design and construction of concrete-filled steel tubular structures, China Planning Press; Beijing, China. [In Chinese]
  8. DBJ 13-51-2003 (2003), Technical specification for concrete-fi lled steel tubular structures, The Construction Department of Fujian Province; Fuzhou, China. [In Chinese]
  9. De Oliveira, W.L.A., De Nardin, S., De Cresce, A.L.H. and El Debs, M.K. (2009), "Influence of concrete strength and length/diameter on the axial capacity of CFT columns", J. Constr. Steel Res., 65(12), 2103-2110. https://doi.org/10.1016/j.jcsr.2009.07.004
  10. Eurocode 4 (2004), Design of composite steel and concrete structures, Part1.1, General rules and rules for Building, BS EN 1994-1-1; British Standards Institution, London, UK.
  11. Fujimoto, T., Nishiyama, I., Mukai, A. and Baba, T. (1995), "Test results of eccentrically loaded short columns-square CFT columns", Proceedings of the Second Joint Technical Coordinating Committee Meeting on Composite and Hybrid Structures, Honolulu, HI, USA, June.
  12. Gho, W.M. and Liu, D.L. (2004), "Flexural behaviour of high-strength rectangular concrete-filled steel hollow sections", J. Constr. Steel Res., 60(11), 1681-1696. https://doi.org/10.1016/j.jcsr.2004.03.007
  13. GJB 4142-2000 (2001), Technical specifications for early-strength model composite structure used for navy port emergency repair in wartime, General Logistics Department of People's Liberation Army. [In Chinese]
  14. Han, L.H., Liu, W. and Yang, Y.F. (2008), "Design calculations on concrete-filled thin-walled steel tubes subjected to axially local compression", Proceedings of Tubular Structures XII, Shanghai, China, October, pp. 85-91.
  15. Hernandez-Figueirido, D., Romero, M.L., Bonet, J.L. and Montalva, J.M. (2012), "Ultimate capacity of rectangular concrete-filled steel tubular columns under unequal load eccentricities", J. Constr. Steel Res., 68(1), 107-117. https://doi.org/10.1016/j.jcsr.2011.07.014
  16. Hong Kong Buildings Department (2005), Code of practice for the structural use of steel.
  17. Johansson, M. (2002), "The efficiency of passive confinement in CFT columns", Steel Compos. Struct., Int. J., 2(5), 379-396. https://doi.org/10.12989/scs.2002.2.5.379
  18. Johansson, M. and Gylltoft, K. (2001), "Structural behavior of slender circular steel-concrete composite columns under various means of load application", Steel Compos. Struct., Int. J., 1(4), 393-410. https://doi.org/10.12989/scs.2001.1.4.393
  19. Kilpatrick, A.E. and Rangan, B.V. (1999a), "Tests on high-strength concrete-filled steel tubular columns", ACI Struct. J., 96(2), 268-274.
  20. Kilpatrick, A.E. and Rangan, B.V. (1999b), "Influence of interfacial shear transfer on behavior of concrete-filled steel tubular columns", ACI Struct. J., 96(4), 642-648.
  21. Lam, D. and Gardner, L. (2008), "Structural design of stainless steel concrete filled columns", J. Constr. Steel Res., 64(11), 1275-1282. https://doi.org/10.1016/j.jcsr.2008.04.012
  22. Liew, J.Y.R. and Xiong, D.X. (2010), "Ultra-high-strength concrete filled columns for high rise buildings", Proceedings of the 4th International Conference on Steel & Composite Structures, (Keynote Lecture), Sydney, Australia, July, pp. 80-91.
  23. Liew, J.Y.R and Xiong, D.X. (2012), "Ultra-high-strength concrete filled composite columns for multi-storey building construction", Adv. Struct. Eng., 15(9), 1487-1503. https://doi.org/10.1260/1369-4332.15.9.1487
  24. Liew, J.Y.R., Chia, K.S., Kazi, M.A.S. and Xiong, D.X. (2008), "Innovation in Composite Construction-Towards the Extreme of High-strength and Lightweight", Proceeding of the Fifth International Conference on Coupled Instabilities in Metal Structures, (K. Rasmussen and T. Wilkinson Ed.), Mansonic Centre, Sydney, Australia, June, pp. 19-33.
  25. Liu, D.L. (2004), "Behaviour of high-strength rectangular concrete-filled steel hollow section columns under eccentric loading," Thin-Wall. Struct., 42(12), 1631-1644. https://doi.org/10.1016/j.tws.2004.06.002
  26. Liu, D.L. (2005), "Tests on high-strength rectangular concrete-filled steel hollow section stub columns", J. Constr. Steel Res., 61(7), 902-911. https://doi.org/10.1016/j.jcsr.2005.01.001
  27. Liu, D.L. (2006), "Behaviour of eccentrically loaded high-strength rectangular concrete-filled steel tubular columns", J. Constr. Steel Res., 62(8), 839-846. https://doi.org/10.1016/j.jcsr.2005.11.020
  28. Liu, D., Gho, W.M. and Yuan, J. (2003), "Ultimate capacity of high-strength rectangular concrete-filled steel hollow section stub columns", J. Constr. Steel Res., 59(12), 1499-1515. https://doi.org/10.1016/S0143-974X(03)00106-8
  29. Lu, Z.H. and Zhao, Y.G. (2009), "A new design equation developed from Eurocode 4-2004 for concrete filled steel tubes", Proceedings of the Sixth International Conference on Behavior of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, PA, USA, August.
  30. Melcher, J.J. and Karmazinova, M. (2004), "The analysis of composite steel-and concrete compression members with high-strength concrete", Proceedings of SSRC Annual Technical Session, pp. 223-237.
  31. Mursi, M. and Uy, B. (2003), "Strength of concrete filled steel box columns incorporating interaction buckling", J. Struct. Eng.-ASCE, 129(5), 626-639. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(626)
  32. Mursi, M. and Uy, B. (2004), "Strength of slender concrete filled high-strength steel box columns", J. Constr. Steel Res., 6(12), 1825-1848.
  33. Mursi, M. and Uy, B. (2006a), "Behaviour and design of fabricated high-strength steel columns subjected to biaxial bending, Part 1: Experiments", Int. J. Adv. Steel Constr., Hong Kong Institute of Steel Construction, 2(4), 286-315.
  34. Mursi, M. and Uy, B. (2006b), "Behaviour and design of fabricated high-strength steel columns subjected to biaxial bending, Part 2: Analysis and design codes", Int. J. Adv. Steel Constr., Hong Kong Institute of Steel Construction, 2(4), 316-354.
  35. National Standard of the People's Republic of China (GB50010-2002) (2002), Code for design of concrete structure, China Communications Press; Beijing, China. [In Chinese]
  36. National Standard of the People's Republic of China (GB50017-2003) (2003), Code for design of steel structures, China Planning Press; Beijing, China. [In Chinese]
  37. Packer, J.A. and Henderson, J.E. (2003), "Hollow structural section connections and trusses-A design guide", Canadian Institute of Steel Construction (CISC); Toronto, Canada.
  38. Portoles, J.M., Romero, M.L., Filippou, F.C. and Bonet, J.L. (2011), "Simulation and design recommendations of eccentrically loaded slender concrete-filled tubular columns", Eng. Struct., 33, 1576-1593. https://doi.org/10.1016/j.engstruct.2011.01.028
  39. Rangan, B.V. and Joyce, M. (1992), "Strength of eccentrically loaded slender steel tubular columns filled with high-strength concrete", ACI Struct. J., 89(6), 676-681.
  40. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng.-ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  41. Sen, H.K. (1969), "Triaxial effects in concrete-filled tubular steel columns", Ph.D. Thesis; University of London, England, UK.
  42. Standards Association of Australia (2014a), AS/NZS 5100: Part 6-2014, Bridge Structures: Steel and Composite Structures, Sydney, Australia. [In Preparation]
  43. Standards Association of Australia (2014b), AS/NZS 2327-2014: Composite Structures, Sydney, Australia. [In Preparation]
  44. Standards Australia (AS3600-2001) (2001), Australian Standard: Concrete Structures.
  45. Standards Australia (AS5100.6-2004) (2004), Bridge design, Part 6: Steel and composite construction, Sydney, Australia.
  46. Standards Australia (AS3600-2009) (2009), Australian Standard: Concrete Structures.
  47. Standards Australia (AS4100-1998) (2012), Amdt1-2012: Australian Standard: Steel structures.
  48. Tao, Z., Uy, B., Han, L.H. and He, S.H. (2008), "Design of concrete-filled steel tubular members according to the Australian Standard AS 5100 model and calibration", Aust. J. Struct. Eng., 8(3), 197-214.
  49. Uy, B. (1999), "Axial compressive strength of steel and composite columns fabricated with high-strength steel plate", Proceedings of the Second International Conference on Advances in Steel Structures, Hong Kong, December, pp. 421-428.
  50. Uy, B. (2000), "Strength of short concrete filled steel box columns incorporating local buckling", J. Struct. Eng.-ASCE, 126(3), 341-352. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(341)
  51. Uy, B. (2001a), "Axial compressive strength of short steel and composite columns fabricated with high-strength steel plate", Steel Compos. Struct., Int. J., 1(2), 113-134.
  52. Uy, B. (2001b), "Strength of short concrete filled high-strength steel box columns", J. Constr. Steel Res., 57(2), 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6
  53. Uy, B., Mursi, M. and Tan, A. (2002), "Strength of slender composite columns fabricated with high-strength structural steel", Proceedings of ICASS'02 Third International Conference on Advances in Steel Structures, Hong Kong, December, pp. 575-582.
  54. Uy, B., Khan, M., Tao, Z. and Mashiri, F. (2013), "Behaviour and design of high-strength steel concrete filled columns", Proceedings of the 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13), Jeju, Korea, September, pp. 150-167.
  55. Varma, A.H., Ricles, J.M., Sause, R. and Lu, L.W. (2002a), "Experimental behavior of high-strength square concrete-filled steel tube beam-columns", J. Struct. Eng.-ASCE, 128(3), 309-318. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(309)
  56. Varma, A.H., Ricles, J.M., Sause, R. and Lu, L.W. (2002b), "Seismic behavior and modeling of high-strength composite concrete-filled steel tube (CFT) beam-columns", J. Constr. Steel Res., 58(5-8), 725-758. https://doi.org/10.1016/S0143-974X(01)00099-2
  57. Varma, A.H., Ricles, J.M., Sause, R. and Lu, L.W. (2004), "Seismic behavior and design of high-strength square concrete-filled steel tube beam columns", J. Struct. Eng.-ASCE, 130(2), 169-179. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(169)
  58. Yi, S.-T., Yang, E.-I. and Choi, J.-Ch. (2006), "Effect of specimen sizes, specimen shapes, and placement directions on compressive strength of concrete", Nucl. Eng. Des., 235, 115-127.
  59. Yu, X.M. and Chen, B.C. (2011), "A statistical method for predicting the axial load capacity of concrete filled steel tubular columns", Int. J. Civil Env. Eng., 11(2), 20-39.
  60. Yu, Q., Tao, Z. and Wu, Y.X. (2008), "Experimental behaviour of high performance concrete-filled steel tubular columns", Thin-Wall. Struct., 46(4), 362-370. https://doi.org/10.1016/j.tws.2007.10.001

피인용 문헌

  1. Confined concrete model of circular, elliptical and octagonal CFST short columns vol.22, pp.3, 2016, https://doi.org/10.12989/scs.2016.22.3.497
  2. Calculating the Strength of Concrete Filled Steel Tube Columns of Solid and Ring Cross-section vol.150, 2016, https://doi.org/10.1016/j.proeng.2016.07.186
  3. Behaviour and design of hollow and concrete-filled spiral welded steel tube columns subjected to axial compression vol.128, 2017, https://doi.org/10.1016/j.jcsr.2016.08.023
  4. Strength, stiffness and ductility of concrete-filled steel columns under axial compression vol.135, 2017, https://doi.org/10.1016/j.engstruct.2016.12.049
  5. Behavior of steel-reinforced concrete-filled square steel tubular stub columns under axial loading vol.119, 2017, https://doi.org/10.1016/j.tws.2017.07.021
  6. Statistical calibration of safety factors for flexural stiffness of composite columns vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.127
  7. Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel vol.125, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.057
  8. Axial compressive behaviour of circular CFFT: Experimental database and design-oriented model vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.921
  9. Confinement models for high strength short square and rectangular concrete-filled steel tubular columns vol.22, pp.5, 2015, https://doi.org/10.12989/scs.2016.22.5.937
  10. Anchored blind bolted composite connection to a concrete filled steel tubular column vol.23, pp.1, 2015, https://doi.org/10.12989/scs.2017.23.1.115
  11. Fire resistance of high strength fiber reinforced concrete filled box columns vol.23, pp.5, 2017, https://doi.org/10.12989/scs.2017.23.5.611
  12. A review and analysis of circular UHPC filled steel tube columns under axial loading vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.417
  13. Behavior of concrete-filled round-ended steel tubes under bending vol.25, pp.4, 2015, https://doi.org/10.12989/scs.2017.25.4.457
  14. Composite action of hollow concrete-filled circular steel tubular stub columns vol.26, pp.6, 2015, https://doi.org/10.12989/scs.2018.26.6.693
  15. Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading vol.27, pp.2, 2015, https://doi.org/10.12989/scs.2018.27.2.243
  16. Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures vol.27, pp.4, 2015, https://doi.org/10.12989/scs.2018.27.4.509
  17. Behavior of polygonal concrete-filled steel tubular stub columns under axial loading vol.28, pp.5, 2015, https://doi.org/10.12989/scs.2018.28.5.573
  18. Square CFST columns under cyclic load and acid rain attack: Experiments vol.30, pp.2, 2015, https://doi.org/10.12989/scs.2019.30.2.171
  19. Axial capacity of reactive powder concrete filled steel tube columns with two load conditions vol.31, pp.1, 2015, https://doi.org/10.12989/scs.2019.31.1.013
  20. Local buckling of rectangular steel tubes filled with concrete vol.31, pp.2, 2015, https://doi.org/10.12989/scs.2019.31.2.201
  21. Mechanical Performance of Stiffened Concrete Filled Double Skin Steel Tubular Stub Columns under Axial Compression vol.23, pp.5, 2015, https://doi.org/10.1007/s12205-019-1313-6
  22. Eccentrically loaded SFRC-filled stainless steel columns vol.172, pp.7, 2019, https://doi.org/10.1680/jstbu.17.00165
  23. Bearing Capacity of Stone-Lightweight Aggregate Concrete-Filled Steel Tubular Stub Column Subjected to Axial Compression vol.23, pp.7, 2015, https://doi.org/10.1007/s12205-019-2287-0
  24. Effect of Steel Casing on Vertical Bearing Characteristics of Steel Tube-Reinforced Concrete Piles in Loess Area vol.9, pp.14, 2015, https://doi.org/10.3390/app9142874
  25. Behavior of Rectangular-Sectional Steel Tubular Columns Filled with High-Strength Steel Fiber Reinforced Concrete Under Axial Compression vol.12, pp.17, 2015, https://doi.org/10.3390/ma12172716
  26. A new empirical formula for prediction of the axial compression capacity of CCFT columns vol.33, pp.2, 2019, https://doi.org/10.12989/scs.2019.33.2.181
  27. Interfacial Bond Behavior of High Strength Concrete Filled Steel Tube after Exposure to Elevated Temperatures and Cooled by Fire Hydrant vol.13, pp.1, 2015, https://doi.org/10.3390/ma13010150
  28. Theoretical Framework for Creep Effect Analysis of Axially Loaded Short CFST Columns under High Stress Levels vol.2020, pp.None, 2015, https://doi.org/10.1155/2020/5694630
  29. GS-MARS method for predicting the ultimate load-carrying capacity of rectangular CFST columns under eccentric loading vol.25, pp.1, 2015, https://doi.org/10.12989/cac.2020.25.1.001
  30. Predicting the axial compressive capacity of circular concrete filled steel tube columns using an artificial neural network vol.35, pp.3, 2015, https://doi.org/10.12989/scs.2020.35.3.415
  31. Design and testing of stainless steel columns filled with steel-fibre-reinforced concrete vol.173, pp.7, 2015, https://doi.org/10.1680/jstbu.18.00165
  32. Test and simulation of circular steel tube confined concrete (STCC) columns made of plain UHPC vol.75, pp.6, 2015, https://doi.org/10.12989/sem.2020.75.6.643
  33. Fully nonlinear inelastic analysis of rectangular CFST frames with semi-rigid connections vol.38, pp.5, 2021, https://doi.org/10.12989/scs.2021.38.5.497
  34. Composite action of rectangular CONCRETE‐FILLED steel tube columns under lateral shear force vol.22, pp.2, 2015, https://doi.org/10.1002/suco.202000283
  35. Behaviour of high strength concrete-filled short steel tubes under sustained loading vol.39, pp.2, 2015, https://doi.org/10.12989/scs.2021.39.2.159
  36. Performance of fly ash and silica fume self-compacting concrete filled steel tube stub columns under axial compression vol.1144, pp.1, 2015, https://doi.org/10.1088/1757-899x/1144/1/012012