Steel and Composite Structures

  • 제19권4호
  • /
  • Pages.877-895
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical study of one-sided branch plate-to-circular hollow section connections

  • Hassan, M.M. (Department of Structural Engineering, Cairo University) ;
  • Ramadan, H. (Department of Structural Engineering, Cairo University) ;
  • Abdel-Mooty, M. (Department of Structural Engineering, Cairo University) ;
  • Mourad, S.A. (Department of Structural Engineering, Cairo University)
  • 투고 : 2014.06.14
  • 심사 : 2015.03.06
  • 발행 : 2015.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Connections to circular hollow steel sections (CHS) are considered one of the most complex and time consuming connections in steel construction. Such connections are usually composed of gusset plates welded to the outside of the steel tube or penetrating the steel tube. Design guides, accounting for the effect of connection configuration on the strength of the connection, are not present. This study aims to investigate, through experimental testing and a parametric study, the influence of connection configuration on the strength of one sided branch plate-to-CHS members. A notable effect was observed on the behavior of the connections due to its detailing changes with respect to capacity, failure mode, ductility, and stress distribution. A parametric study is performed using the calibrated analytical model to include a wider range of parameters. The study involves 26 numerical analyses of finite element models including parameters of the diameter-to-thickness (D/t) ratio, length of gusset plate, and connection configuration. Accordingly, a modification to the formulas provided by the current design recommendations was suggested to include connection configuration effects for the one sided branch plate-to-CHS members.

키워드

참고문헌

  1. Elghazouli, A.Y. and Packer, J.A, (2014), "Seismic design solutions for connections to tubular members", J. Steel Constr., 7(2), 73-83. https://doi.org/10.1002/stco.201410020
  2. Hassan, M.M., Ramadan, H.M., Abdel-Mooty, M. and Mourad, S.A. (2013), "Experimental study of CFT bracing connections behavior under half-cyclic loading", Proceedings of the 11th International Conference on Steel, Space and Composite Structures, Qingdao, China, December.
  3. Hassan, M.M., Ramadan, H.M., Abdel-Mooty, M., and Mourad, S.A. (2014a), "Behavior of concenrtrically loaded CFT braces connections", J. Adv. Res., 5(1), 243-252. https://doi.org/10.1016/j.jare.2013.03.005
  4. Hassan, M.M., Ramadan, H.M., Naeem, M. and Mourad, S.A. (2014b), "Behavior of gusset plate-T0-CCFT connections with different configurations", Steel Compos. Struct., Int. J., 17(5), 735-751. https://doi.org/10.12989/scs.2014.17.5.735
  5. Kamba, T. and Taclendo, C. (1998), "CHS column connections without stiffeners", Proceedings of the 8th International Symposium on Tubular Structures, Singapore, August.
  6. Kurobane, Y., Packer, J.A., Wardenier, J. and Yeomans, N. (2004), Design Guide for Structural Hollow Section Column Connections, CIDECT, TUV-Verlag GmbH, Koln, Germany.
  7. Lu, L.H., de Winkel, G.D., Yu, Y. and Wardenier, J. (1994), "Deformation limit for the ultimate strength of hollow sections", Proceedings of the 6th International Symposium on Tubular Structures, Melbourne, VA, Australia, December.
  8. Martinez-Saucedo, G. and Packer, J.A. (2009), "Static design recommendations for slotted end HSS connections in tension", J. Struct. Eng., 135(7), 797-805. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000016
  9. Martinez-Saucedo, G., Packer, J.A. and Christopoulos, C. (2008), "Gusset plate connections to circular hollow section braces under inelastic cyclic loading", J. Struct. Eng., 134(7), 1252-1258. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1252)
  10. Shen, W., Choo, Y.S., Wardenier, J., Packer, J.A. and van der Vegte, G.J. (2013), "Static srength of axially loaded EHS X-Joints with braces welded to the narrow sides of the chord", J. Constr. Steel Res., 88(1), 181-190. https://doi.org/10.1016/j.jcsr.2013.05.012
  11. Swanson Analysis Systems (1998), ANSYS Release 11.0, Houston, USA.
  12. Van der Vegte, G.J., Wardenier, J. and Makino, Y. (2007), "Effect of chord load on ultimate strength of CHS X-joints", Int. J. Offshore Polar Eng., 17(4), 301-308.
  13. Voth, A.P. and Packer, J.A. (2012a), "Numerical study and design of skewed X-type branch plate-to-circular hollow section connections", J. Construct. Steel Research, 68(1), 1-10. https://doi.org/10.1016/j.jcsr.2011.06.005
  14. Voth, A.P. and Packer, J.A. (2012b), "Branch plate-to-circular hollow structural section connections: experimental investigation and finite-element modeling", J. Struct. Eng., 138(8), 995-1006. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000505
  15. Voth, A.P. and Packer, J.A. (2012c), "Branch plate-to-circular hollow structural section connections. II: X-type parametric numerical study and design", J. Struct. Eng., 138(8), 1007-1018. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000545
  16. Wardenier, J., Kurobane, Y., Packer, J.A., van der Vegte, G.J. and Zhao, X.L. (2008), Design Guide for Circular Hollow Section (CHS) Joints under Predominantly Static Loading, (2nd Edition), CIDECT, Geneva, Switzerland.

피인용 문헌

  1. Strain measurements and analyses around the bolt holes of structural steel plate connections using full-field measurements vol.131, 2017, https://doi.org/10.1016/j.engstruct.2016.11.033
  2. Ultimate strength of transversal T-branch plate-to-CHS connections under compression vol.112, 2017, https://doi.org/10.1016/j.tws.2016.12.019
  3. Reliability analysis of the nonlinear behaviour of stainless steel cover-plate joints vol.25, pp.1, 2017, https://doi.org/10.12989/scs.2017.25.1.045
  4. Experiment and Finite Element Analysis on the Ultimate Strength of Ring-Stiffened Tube-Gusset Joints vol.19, pp.5, 2015, https://doi.org/10.1007/s13296-019-00227-1
  5. Further study on improvement on strain concentration in through-diaphragm connection vol.39, pp.2, 2015, https://doi.org/10.12989/scs.2021.39.2.135