References
- Aukrust, T., Tjotta, S., Vatne, H., and Van Houtte, P., "Coupled FEM and Texture Modelling of Plane Strain Extrusion of an Aluminium Alloy," International Journal of Plasticity, Vol. 13, No. 1, pp. 111-125, 1997. https://doi.org/10.1016/S0749-6419(97)00003-X
- Beaudoin, A. J., Mathur, K., Dawson, P., and Johnson, G., "Three-Dimensional Deformation Process Simulation with Explicit Use of Polycrystal Plasticity Models," International Journal of Plasticity, Vol. 9, No. 7, pp. 833-860, 1993. https://doi.org/10.1016/0749-6419(93)90054-T
- Kwon, G., Chae, S., Kwon, S., Kim, M., and Hwang, S., "Frictional Effects on the Deformation Behavior of Materials and Die during Equal Channel Angular Pressing (ECAP) with Pure-Zr," J. Korean Soc. Precis. Eng., Vol. 18, No. 6, pp. 182-187, 2001.
- Segal, V., "Equal Channel Angular Extrusion: From Macromechanics to Structure Formation," Materials Science and Engineering: A, Vol. 271, No. 1, pp. 322-333, 1999. https://doi.org/10.1016/S0921-5093(99)00248-8
- Iwahashi, Y., Wang, J., Horita, Z., Nemoto, M., and Langdon, T. G., "Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials," Scripta Materialia, Vol. 35, No. 2, pp. 143-146, 1996. https://doi.org/10.1016/1359-6462(96)00107-8
- Nakashima, K., Horita, Z., Nemoto, M., and Langdon, T. G., "Development of a Multi-Pass Facility for Equal-Channel Angular Pressing to High Total Strains," Materials Science and Engineering: A, Vol. 281, No. 1, pp. 82-87, 2000. https://doi.org/10.1016/S0921-5093(99)00744-3
- Iwahashi, Y., Horita, Z., Nemoto, M., and Langdon, T. G., "An Investigation of Microstructural Evolution during Equal-Channel Angular Pressing," Acta Materialia, Vol. 45, No. 11, pp. 4733-4741, 1997. https://doi.org/10.1016/S1359-6454(97)00100-6
- Kim, K., Yang, D., and Yoon, J., "Microstructural Evolution and Its Effect on Mechanical Properties of Commercially Pure Aluminum Deformed by ECAE (Equal Channel Angular Extrusion) via Routes A and C," Materials Science and Engineering: A, Vol. 527, No. 29, pp. 7927-7930, 2010. https://doi.org/10.1016/j.msea.2010.08.084
- Gambin, W., "Plasticity of Crystals with Interacting Slip Systems," Engineering Transactions, Vol. 39, No. 3-4, pp. 303-324, 1991.
- Gambin, W., "Crystal Plasticity Based on Yield Surfaces with Rounded-off Corners," Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 71, No. 4, pp. T265-T268, 1991.
- Gambin, W. and Barlat, F., "Modeling of Deformation Texture Based on Rate Independent Crystal Plasticity," International Journal of Plasticity, Vol. 13, No. 1-2, pp. 75-85, 1997. https://doi.org/10.1016/S0749-6419(97)00001-6
- Hill, R. and Rice, J., "Constitutive Analysis of Elastic-Plastic Crystals at Arbitrary Strain," Journal of the Mechanics and Physics of Solids, Vol. 20, No. 6, pp. 401-413, 1972. https://doi.org/10.1016/0022-5096(72)90017-8
- Taylor, G. I., "Plastic Strain in Metals," Journal of the Institute of Metals, Vol. 62, pp. 307-324, 1938.
- Yoon, J. and Yang, D., "A Three-Dimensional Rigid-Plastic Finite Element Analysis of Bevel Gear Forging by Using a Remeshing Technique," International Journal of Mechanical Sciences, Vol. 32, No. 4, pp. 277-291, 1990. https://doi.org/10.1016/0020-7403(90)90094-Y
- Park, K. and Yang, D., "Mismatching Refinement with Domain Decomposition for the Analysis of Steady-State Metal Forming Process," International Journal for Numerical Methods in Engineering, Vol. 48, No. 7, pp. 1089-1106, 2000. https://doi.org/10.1002/(SICI)1097-0207(20000710)48:7<1089::AID-NME918>3.0.CO;2-4