References
- Cho, H., Hemker, K., Lian, K., Goettert, J., and Dirras, G., "Measured Mechanical Properties of Liga Ni Structures," Sensors and Actuators A: Physical, Vol. 103, No. 1, pp. 59-63, 2003. https://doi.org/10.1016/S0924-4247(02)00314-X
- Espinosa, H. D., Berbenni, S., Panico, M., and Schwarz, K. W., "An Interpretation of Size-Scale Plasticity in Geometrically Confined Systems," Proc. of the National Academy of Sciences of the United States of America, Vol. 102, No. 47, pp. 16933-16938, 2005. https://doi.org/10.1073/pnas.0508572102
- Espinosa, H., Panico, M., Berbenni, S., and Schwarz, K., "Discrete Dislocation Dynamics Simulations to Interpret Plasticity Size and Surface Effects in Freestanding FCC Thin Films," International Journal of Plasticity, Vol. 22, No. 11, pp. 2091-2117, 2006. https://doi.org/10.1016/j.ijplas.2006.01.007
- Lee, H. J. and Ahn, D. G., "A Study on Tensile Behavior of Transparent Polycarbonate (PC) Plate in the High Temperature," J. Korean Soc. Precis. Eng., Vol. 31, No. 1, pp. 21-28, 2014. https://doi.org/10.7736/KSPE.2014.31.1.21
- Haj-Ali, R., Kim, H.-K., Koh, S. W., Saxena, A., and Tummala, R., "Nonlinear Constitutive Models from Nanoindentation Tests Using Artificial Neural Networks," International Journal of Plasticity, Vol. 24, No. 3, pp. 371-396, 2008. https://doi.org/10.1016/j.ijplas.2007.02.001
- Mazza, E., Abel, S., and Dual, J., "Experimental Determination of Mechanical Properties of Ni and Ni-Fe Microbars," Microsystem Technologies, Vol. 2, No. 4, pp. 197-202, 1996. https://doi.org/10.1007/s005420050044
- Mirshams, R. A. and Pothapragada, R. M., "Correlation of Nanoindentation Measurements of Nickel Made Using Geometrically Different Indenter Tips," Acta Materialia, Vol. 54, No. 4, pp. 1123-1134, 2006. https://doi.org/10.1016/j.actamat.2005.10.048
- Nix, W. D. and Gao, H., "Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity," Journal of the Mechanics and Physics of Solids, Vol. 46, No. 3, pp. 411-425, 1998. https://doi.org/10.1016/S0022-5096(97)00086-0
- Oliver, W. C. and Pharr, G. M., "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," Journal of Materials Research, Vol. 7, No. 6, pp. 1564-1583, 1992. https://doi.org/10.1557/JMR.1992.1564
- Haque, M. and Saif, M., "Application of MEMS Force Sensors for in Situ Mechanical Characterization of Nano-Scale Thin Films in SEM and TEM," Sensors and Actuators A: Physical, Vol. 97, pp. 239-245, 2002.
- Espinosa, H. D., Berbenni, S., Panico, M., and Schwarz, K. W., "An Interpretation of Size-Scale Plasticity in Geometrically Confined Systems," Proc. of the National Academy of Sciences of the United States of America, Vol. 102, No. 47, pp. 16933-16938, 2005. https://doi.org/10.1073/pnas.0508572102
- Uchic, M. D., Dimiduk, D. M., Florando, J. N., and Nix, W. D., "Sample Dimensions Influence Strength and Crystal Plasticity," Science, Vol. 305, No. 5686, pp. 986-989, 2004. https://doi.org/10.1126/science.1098993
- Kiener, D., Grosinger, W., Dehm, G., and Pippan, R., "A Further Step towards an Understanding of Size- Dependent Crystal Plasticity: In Situ Tension Experiments of Miniaturized Single-Crystal Copper Samples," Acta Materialia, Vol. 56, No. 3, pp. 580-592, 2008. https://doi.org/10.1016/j.actamat.2007.10.015
- Yang, D.-Y., Lim, T. W., Son, Y., Barlat, F., and Yoon, J. W., "Gripless Nanotension Test for Determination of Nano-Scale Properties," International Journal of Plasticity, Vol. 27, No. 10, pp. 1527-1536, 2011. https://doi.org/10.1016/j.ijplas.2010.09.006
- Fritz, T., Cho, H., Hemker, K., Mokwa, W., and Schnakenberg, U., "Characterization of Electroplated Nickel," Microsystem Technologies, Vol. 9, No. 1-2, pp. 87-91, 2002. https://doi.org/10.1007/s00542-002-0199-1
- Kim, S.-H. and Boyd, J. G., "A New Technique for Measuring Young's Modulus of Electroplated Nickel Using AFM," Measurement Science and Technology, Vol. 17, No. 8, Paper No. 2343, 2006.