Nuclear Engineering and Technology

  • 제47권4호
  • /
  • Pages.416-423
  • /
  • 2015
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

NEW WALL DRAG AND FORM LOSS MODELS FOR ONE-DIMENSIONAL DISPERSED TWO-PHASE FLOW

  • KIM, BYOUNG JAE (Thermal-Hydraulic Safety Research Division, Korea Atomic Energy Research Institute) ;
  • LEE, SEUNG WOOK (Thermal-Hydraulic Safety Research Division, Korea Atomic Energy Research Institute) ;
  • KIM, KYUNG DOO (Thermal-Hydraulic Safety Research Division, Korea Atomic Energy Research Institute)
  • 투고 : 2014.05.14
  • 심사 : 2015.01.01
  • 발행 : 2015.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

It had been disputed how to apply wall drag to the dispersed phase in the framework of the conventional two-fluid model for two-phase flows. Recently, Kim et al. [1] introduced the volume-averaged momentum equation based on the equation of a solid/fluid particle motion. They showed theoretically that for dispersed two-phase flows, the overall two-phase pressure drop by wall friction must be apportioned to each phase, in proportion to each phase fraction. In this study, the validity of the proposed wall drag model is demonstrated though one-dimensional (1D) simulations. In addition, it is shown that the existing form loss model incorrectly predicts the motion of the dispersed phase. A new form loss model is proposed to overcome that problem. The newly proposed form loss model is tested in the region covering the lower plenum and the core in a nuclear power plant. As a result, it is shown that the new models can correctly predict the relative velocity of the dispersed phase to the surrounding fluid velocity in the core with spacer grids.

키워드

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP)

참고문헌

  1. B.J. Kim, J. Kim, K.D. Kim, On the wall drag term in the averaged momentum equation for dispersed flows, Nucl. Sci. Eng. 178 (2014) 225-239. https://doi.org/10.13182/NSE13-57
  2. USNRC, Trace V5.840 Theory Manual: Fields Equations, Solution Methods, and Physical Models, U.S. Nuclear Regulatory Commission, 2013.
  3. D. Bestion, The physical closure laws in the cathare code, Nucl. Eng. Des. 124 (1990) 229-245. https://doi.org/10.1016/0029-5493(90)90294-8
  4. C.Y. Paik, L.E. Hochreiter, J.M. Kelly, R.J. Kohrt, Analysis of Flecht-Seaset 163-Rod Blocked Bundle Data Using Cobra-Tf, NUREG/CR-4166, EPRI-NP-4111, WCAP-10375, Westinghouse Electric Corporation, 1985.
  5. G. Kocamustafaogullari, Z. Wang, An experimental study on local interfacial parameters in a horizontal bubbly two-phase flow, Int. J. Multiphase Flow 17 (1991) 553-572. https://doi.org/10.1016/0301-9322(91)90024-W
  6. G. Kocamustafaogullari, W.D. Huang, Internal structure and interfacial velocity development for bubbly two-phase flow, Nucl. Eng. Des. 151 (1994) 79-101. https://doi.org/10.1016/0029-5493(94)90035-3
  7. USNRC, Relap5/Mod3.3 Code Manual Vol. IV: Models and Correlations, NUREG/CR-5535/Rev P4-Vol IV, Nuclear Regulatory Commission, 2010.
  8. S.J. Ha, C.E. Park, K.D. Kim, C.H. Ban, Development of the space code for nuclear power plants, Nucl. Eng. Technol. 43 (2011) 45-62. https://doi.org/10.5516/NET.2011.43.1.045
  9. D.A. Drew, Mathematical modeling of two-phase flow, Ann. Rev. Fluid Mech. 15 (1983) 261-291. https://doi.org/10.1146/annurev.fl.15.010183.001401
  10. M.R. Maxey, J.J. Riley, Equation of motion for a small rigid sphere in a nonuniform flow, Phys. Fluids 26 (1983) 883-889. https://doi.org/10.1063/1.864230
  11. P.M. Lovalenti, J.F. Brady, The force on a bubble, drop, or particle in arbitrary time-dependent motion at small Reynolds number, Phys. Fluids 5 (1993) 2104-2116. https://doi.org/10.1063/1.858550
  12. T.B. Anderson, R. Jackson, Fluid mechanical description of fluidized beds: equations of motion, Ind. Eng. Chem. Fundamen. 6 (1967) 527-539. https://doi.org/10.1021/i160024a007
  13. A. Prosperetti, A.V. Jones, Pressure forces in disperse twophase flow, Int. J. Multiphas. Flow. 10 (1984) 425-440. https://doi.org/10.1016/0301-9322(84)90054-5
  14. C. Crowe, J.D. Schwarzkopf, M. Sommerfeld, Y. Tsuji, Multiphase Flows with Droplets and Particles, second ed., CRC Press, New York, 2011.
  15. M. Ishii, T.C. Chawla, Local Drag Laws in Dispersed Twophase Flow, NUREG/CR-1230, ANL-79-105, Argonne National Laboratory, 1979.
  16. T. Hibiki, M. Ishii, Interfacial area concentration of bubbly flow systems, Chem. Eng. Sci. 57 (2002) 3967-3977. https://doi.org/10.1016/S0009-2509(02)00263-4
  17. S.W. Churchill, Friction-factor equation spans all fluid-flow regimes, Chem. Eng. 84 (1977) 91-92.
  18. K.T. Claxton, J.G. Collier, J.A. Ward, H.T.F.S. Correlations for Two-phase Pressure Drop and Void Fraction in Tubes, AERER7162, 1972.

피인용 문헌

  1. Comparative study of the two-fluid momentum equations for multi-dimensional bubbly flows: Modification of Reynolds stress vol.31, pp.1, 2015, https://doi.org/10.1007/s12206-016-1223-1
  2. 유로단면이 변하는 수평관 내 기포류에서의 기포 및 액체 속도 vol.15, pp.3, 2015, https://doi.org/10.5407/jksv.2017.15.3.020