DOI QR코드

DOI QR Code

Application of ozone treatment in cooling water systems for energy and chemical conservation

  • Ataei, Abtin (Graduate School of the Environment and Energy, Science and Research Branch, Islamic Azad University) ;
  • Mirsaeed, Morteza Ghazi (Graduate School of the Environment and Energy, Science and Research Branch, Islamic Azad University) ;
  • Choi, Jun-Ki (Department of Mechanical and Aerospace Engineering, University of Dayton) ;
  • Lashkarboluki, Reza (Department of Chemical Engineering, Iran University of Science & Technology)
  • 투고 : 2015.06.13
  • 심사 : 2015.07.06
  • 발행 : 2015.09.25

초록

In this study, a complete set of recirculating cooling water system and the required instruments were built in a semi-industrial-scale and a 50 g/h ozone generation plant and a chlorine system were designed for cooling water treatment. Both chlorination and ozonation treatment methods were studied and the results were analyzed during two 45-days periods. The concentrations of ozone and chlorine in recirculating water were constant at 0.1 mg/lit and 0.6 mg/lit, respectively. In ozone treatment, by increasing the concentration cycle to 33%, the total water consumption decreased by 26% while 11.5% higher energy efficiency achieved thanks to a better elimination of bio-films. In case of Carbon Steel, the corrosion rate reached to 0.012 mm/yr and 0.025 mm/yr for the ozonation and chlorination processes, respectively. Furthermore, consumptions of the anti-corrosion and anti-sedimentation materials in the ozone cooling water treatment were reduced about 60% without using any oxidant and non-oxidant biocides. No significant changes in sediment load were seen in ozonation compared to chlorination. The Chemical Oxygen Demand of the blow-down in ozonation method decreased to one-sixth of that in the chlorination method. Moreover, the soluble iron and water turbidity in the ozonation method were reduced by 97.5% and 70%, respectively. Although no anaerobic bacteria were seen in the cooling water at the proper concentration range of ozone and chlorine, the aerobic bacteria in chlorine and ozone treatment methods were 900 and 200 CFU/ml, respectively. The results showed that the payback time for the ozone treatment is about 2.6 years.

키워드

참고문헌

  1. Alawadhi, E.M. (2011), "Cooling process of water in a horizontal circular enclosure subjected to non- uniform boundary conditions", Energy, 36(1), 586-594. https://doi.org/10.1016/j.energy.2010.10.001
  2. Al-Bassam, E. and Maheshwari, G.P. (2011), "A new scheme for cooling tower water conservation in arid-zone countries", Energy, 36(7), 3985-3991. https://doi.org/10.1016/j.energy.2011.05.003
  3. ASTM D4412-84 (2009), Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits; ASTM International, West Conshohocken, PA, USA. www.astm.org
  4. ASTM D5465-93 (2012), Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods; ASTM International, West Conshohocken, PA, USA. www.astm.org
  5. Ataei, A. (2008), "Combined pinch analysis for process industries", Ph.D. Thesis; Science and Research Branch, Islamic Azad University, Tehran, Iran.
  6. Ataei, A., Panjeshahi, M.H., Parand, R. and Tahouni, N. (2009), "Application of an optimum design water system by regeneration concept and pinch technology for water and energy conservation", J. Appl. Sci., 9, 1847-1858. https://doi.org/10.3923/jas.2009.1847.1858
  7. Ataei, A., Gharaie, M., Parand, R. and Panjeshahi, E. (2010), "Application of ozone treatment and pinch technology in cooling water systems design for water and energy conservation", Int. J. Energ. Res., 34, 494-506. https://doi.org/10.1002/er.1568
  8. Boffardi, B.P. (1995), "Water treatments in corrosion tests and standards - Application and interpretation", American Society for Testing and Materials; Philadelphia, PA, USA, 699 p.
  9. Conner, A. (2005), "Reducing cooling towers cost with the ozone technology", Clean Water Ozone Systems Inc.
  10. Cortinovis, G.F., Paiva, J.L., Song, T.W. and Pinto, J.M. (2009), "A systemic approach for optimal cooling tower operation", Energ. Convers. Manage., 50(9), 2200-2209. https://doi.org/10.1016/j.enconman.2009.04.033
  11. Eatom, A.D. (1995), Standard methods for the examination of water and wastewater.
  12. Eatom, A.D. (2005), Standard methods for the examination of water and wastewater.
  13. Gaylarde, C.C. and Videla, H.A. (1992), "Biocide action on metal bio films", Proceedings of the Pan-American Congress on Corrosion and Protection, NACE International; Mar del Plata, Argentina, Houston, TX, USA, pp. 371-378.
  14. Ghazi, M. and Ataei, A. (2014a), "A new design for an automatic wet cooling tower with remote controlled capability", Iranian Patent No. 84442.
  15. Ghazi, M. and Ataei, A. (2014b), "Continues and remote controlled process for Ozone measurement in cooling towers: A novel approach based on ORP method", Iranian Patent No. 83863.
  16. Hertrampf, J. (1998), Cooling Water Treatment by a Combination of Ozone and Chemicals, GmbH Krefeld, Germany.
  17. Heidarinejad, G., Karami, M. and Delfani, S. (2009), "Numerical simulation of counter-flow wet-cooling towers", Int. J. Refrig., 32(5), 996-1002. https://doi.org/10.1016/j.ijrefrig.2008.10.008
  18. Heikkila, P. and Milosavljevic, N. (2001), "A comprehensive approach to cooling tower design", Appl. Therm. Eng., 21(9), 899-915. https://doi.org/10.1016/S1359-4311(00)00078-8
  19. Historical Standard (1983), ASTM D2688-05 Standard Test Methods for Corrosively of Water in the Absence of Heat Transfer (Weight Loss Methods), Annual Book of ASTM Standards; D2688-05; Volume 03.01, PA, USA.
  20. Jonnalagadda, S.B. and Nadupalli, S. (2014), "Chlorine dioxide for bleaching, industrial applications and water treatment", Indian Chem. Eng., 56(2), 123-136. https://doi.org/10.1080/00194506.2014.881032
  21. Kern, D.Q. (1950), Process Heat Transfer: Heat Exchanger Design, New York, NY, USA.
  22. Panjeshahi, M.H., Ataei, A., Gharaie, M. and Parand, R. (2009), "Optimum design of cooling water systems for energy and water conservation", Chem. Eng. Res. Des., 87, 200-209. https://doi.org/10.1016/j.cherd.2008.08.004
  23. Ponce-Ortega, J.M., Serna-Gonzalez, M. and Jimenez-Gutierrez, A. (2010), "Optimization model for re-circulating cooling water systems", Comput. Chem. Eng., 34(2), 177-195. https://doi.org/10.1016/j.compchemeng.2009.07.006
  24. Putois, T., Guittonneau, S., Chaabna, Z., Viboud, S., Zydowicz, P., Bayle, X. and Fontvieille, D. (2014), "Advanced oxidation processes for disinfection treatment of cooling waters", Ozone-Sci. Eng., 36(5), 440-450. https://doi.org/10.1080/01919512.2014.880646
  25. Rao, R.V. and Patel, V.K. (2011), "Optimization of mechanical draft counter flow wet-cooling tower using artificial bee colony algorithm", Energ. Convers. Manage., 52(7), 2611-2622. https://doi.org/10.1016/j.enconman.2011.02.010
  26. Rubio-Castro, E., Serna-Gonzalez, M., Ponce-Ortega, J.M. and El-Halwagi, M.M. (2013), "Synthesis of cooling water systems with multiple cooling towers", Appl. Therm. Eng., 50(1), 957-974. https://doi.org/10.1016/j.applthermaleng.2012.06.015
  27. Serna-Gonzalez, M., Ponce-Ortega, J.M. and Jimenez-Gutierrez, A. (2010), "MINLP optimization of mechanical draft counter flow wet-cooling towers", Chem. Eng. Res. Des., 88(5), 614-625. https://doi.org/10.1016/j.cherd.2009.09.016
  28. Strittmatter, R., Yang, B. and Johnson, D.A. (2003), Application of Ozone in Cooling Water Systems, Nalco Chemistry.
  29. Tijing, L.D., Kim, H.Y., Lee, D.H., Kim, C.S. and Cho, Y.I. (2010), "Physical water treatment using RF electric fields for the mitigation of $CaCO_3$ fouling in cooling water", Int. J. Heat Mass Tran., 53(7), 1426-1437. https://doi.org/10.1016/j.ijheatmasstransfer.2009.12.009
  30. Viera, M.R., Guiamet, P.S., de Melle, M.F.L. and Videla, H.A. (2000), "Use of dissolved ozone for controlling plank tonic and sessile bacteria in industrial cooling systems", Int. Biodeter. Biodeg., 44(4), 201-207. https://doi.org/10.1016/S0964-8305(99)00078-5
  31. U.S. Department of Energy (The Pacific National Laboratory) (1995), Ozone treatment for cooling tower.

피인용 문헌

  1. The applications of ozone-based advanced oxidation processes for wastewater treatment: A review vol.9, pp.3, 2020, https://doi.org/10.12989/aer.2020.9.3.191
  2. A comprehensive review of the Fenton-based approaches focusing on landfill leachate treatment vol.10, pp.1, 2015, https://doi.org/10.12989/aer.2021.10.1.059
  3. Reclaimed water use in industrial cooling circuits: Compatibility with TP11 biocides vol.43, pp.None, 2015, https://doi.org/10.1016/j.jwpe.2021.102227