Smart Structures and Systems

  • 제16권4호
  • /
  • Pages.607-621
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Building structural health monitoring using dense and sparse topology wireless sensor network

  • Haque, Mohammad E. (Department of Electrical, Electronics and System Engineering, Universiti Kebangsaan Malaysia (UKM)) ;
  • Zain, Mohammad F.M. (Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM)) ;
  • Hannan, Mohammad A. (Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM)) ;
  • Rahman, Mohammad H. (School of Engineering and Information Technology, UNSW at the Australian Defense Force Academy)
  • 투고 : 2014.09.17
  • 심사 : 2015.02.05
  • 발행 : 2015.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Wireless sensor technology has been opened up numerous opportunities to advanced health and maintenance monitoring of civil infrastructure. Compare to the traditional tactics, it offers a better way of providing relevant information regarding the condition of building structure health at a lower price. Numerous domestic buildings, especially longer-span buildings have a low frequency response and challenging to measure using deployed numbers of sensors. The way the sensor nodes are connected plays an important role in providing the signals with required strengths. Out of many topologies, the dense and sparse topologies wireless sensor network were extensively used in sensor network applications for collecting health information. However, it is still unclear which topology is better for obtaining health information in terms of greatest components, node's size and degree. Theoretical and computational issues arising in the selection of the optimum topology sensor network for estimating coverage area with sensor placement in building structural monitoring are addressed. This work is an attempt to fill this gap in high-rise building structural health monitoring application. The result shows that, the sparse topology sensor network provides better performance compared with the dense topology network and would be a good choice for monitoring high-rise building structural health damage.

키워드

참고문헌

  1. Almulla, M., Abrougui, K. and A. Boukerche (2013), "LEADMesh: Design and analysis of an efficient leader election protocol for wireless mesh networks", Simul. Model. Pract. Th., 36, 22-32. https://doi.org/10.1016/j.simpat.2013.04.005
  2. Boers, N.M., Nikolaidis, I. and Gburzynski, P. (2012), "Sampling and classifying interference patterns in a wireless sensor network", ACM Trans. on Sen. Net., 9(1), 2.
  3. Bollobas, B. and Riordan, O. (2012), "Asymptotic normality of the size of the giant component via a random walk", J. Comb. Theory. B, 102(1), 53-61. https://doi.org/10.1016/j.jctb.2011.04.003
  4. Casciati, S. and Chen, Z. (2011), "A multi-channel wireless connection system for structural health monitoring applications", Struct. Control. Health. Monit., 18(5), 588-600. https://doi.org/10.1002/stc.403
  5. Casciati, F. and Lucia, F. (2014), "Sensor placement driven by a model order reduction (MOR) reasoning", Smart Struct. Syst., 13(3), 343-352. https://doi.org/10.12989/sss.2014.13.3.343
  6. Chang, C.Y. and Hung, S.S. (2012), "Implementing RFIC and sensor technology to measure temperature and humidity inside concrete structures", Constr. Build. Mater., 26(1), 628-637. https://doi.org/10.1016/j.conbuildmat.2011.06.066
  7. Guo, G., Hackmann, W., Yan, G., Sun, Z., Lu, C. and Dyke, S. (2014), "Cyber-physical co-design of distributed structural health monitoring with wireless sensor networks", IEEE T. Para. Distr. Syst., 25(1), 63-72. https://doi.org/10.1109/TPDS.2013.30
  8. Hackmann, G., Guo, W., Yan, G., Sun, Z., Lu, C. and Dyke, S. (2014), "Cyber-physical codesign of distributed structural health monitoring with wireless sensor networks", IEEE T. Para. and Distr. Sys., 25(1), 63-72. https://doi.org/10.1109/TPDS.2013.30
  9. Kim, C., Park, T., Lim, H. and Kim, H. (2013), "On-site construction management using mobile computing technology", Automat. Constr., 35, 415-423. https://doi.org/10.1016/j.autcon.2013.05.027
  10. Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  11. Kumar, N., Iqbal, R., Chilamkurti, N. and James, A. (2011), "An ant based multi constraints QoS aware service selection algorithm in Wireless Mesh Networks", Simul. Model. Pract. Th., 19(9), 1933-1945. https://doi.org/10.1016/j.simpat.2011.05.007
  12. Labrador, M.A. and Pedro, M.W. (2009), Topology control in wireless sensor networks, Springer, Heidelberg, USA.
  13. Nath, S., Ekambaram, V.N., Kumar, A. and Kumar, P.V. (2012), Theory and algorithms for hop-count-based localization with random geometric graph models of dense sensor networks. ACM Trans. on Sen. Net. (TOSN), 8(4), 35.
  14. Nikola, B., Dimitris, A., Kostas, B., Fabio, C. and Plata-Chaves, J. (2014), "Spatio-temporal protocol for power-efficient acquisition wireless sensors based SHM", Smart Struct. Syst., 14(1), 1-16. https://doi.org/10.12989/sss.2014.14.1.001
  15. Penrose, M.D. (1999), "A strong law for the largest nearest-neighbour link between random points", J. Lon. Math. Soc., 60(03), 951-960. https://doi.org/10.1112/S0024610799008157
  16. Papadimitriou, C. (2004), "Optimal sensor placement methodology for parametric identification of structural systems", J. Sound Vib. , 278(4), 923-947. https://doi.org/10.1016/j.jsv.2003.10.063
  17. Rao, A.R.M. and Anandakumar, G. (2007), "Optimal placement of sensors for structural system identification and health monitoring using a hybrid swarm intelligence technique", Smart Mater. Struct., 16(6), 2658. https://doi.org/10.1088/0964-1726/16/6/071
  18. Rohan, N.S., Toula, O., Marios, A.K., Renos, A.V. and Christis, Z.C. (2014), "Multi-type. Multi-sensor placement optimization for structural health monitoring of long span bridges", Smart Struct. Syst., 14(1), 55-70. https://doi.org/10.12989/sss.2014.14.1.055
  19. Santi, P. (2005), "Topology control in wireless ad hoc and sensor networks", ACM Comput. Surv., 37(2), 164-194. https://doi.org/10.1145/1089733.1089736
  20. Stabile, T.A., Perrone, A., Gallipoli, M.R., Ditommaso, R. and Ponzo, F.C. (2013), "Dynamic survey of the musmeci bridge by joint application of ground-based microwave radar interferometry and ambient noise standard spectral ratio techniques", IEEE Geosci. Remote. Sens. Lett., 10, 870-874. https://doi.org/10.1109/LGRS.2012.2226428
  21. Wightman, P.M. and Labrador, M.A. (2009), "Atarraya: A simulation tool to teach and research topology control algorithms for wireless sensor networks", Proceedings of the 2nd International Conference on Simulation Tools and Techniques. ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering).
  22. Worden, K. and Burrows, A.P. (2001), "Optimal sensor placement for fault detection", Eng. Struct., 23(8), 885-901. https://doi.org/10.1016/S0141-0296(00)00118-8
  23. Yang, G., Liang, H., Wu, C. and Cao, X. (2012), "Construction hoist security application for tall building construction in wireless networks", Automat. Constr., 27, 147-154. https://doi.org/10.1016/j.autcon.2012.04.010
  24. Yildirim, U., Oguzand, O. and Bogdanovic. N. (2013), "A prediction-error-based method for data transmission and damage detection in wireless sensor networks for structural health monitoring", J. Vib. Control., 19(15), 2244-2254. https://doi.org/10.1177/1077546313501538
  25. Zhang, T., Wang, D., Cao, J., Ni, Y.Q., Chen, L.J. and Chen, D. (2012), "Elevator-assisted sensor data collection for structural health monitoring", IEEE T. Mob. Comput., 11(10), 1555-1568. https://doi.org/10.1109/TMC.2011.191

피인용 문헌

  1. A measuring system for determination of a cantilever beam support moment vol.19, pp.4, 2017, https://doi.org/10.12989/sss.2017.19.4.431
  2. Comparative Study of IoT-Based Topology Maintenance Protocol in a Wireless Sensor Network for Structural Health Monitoring vol.12, pp.15, 2020, https://doi.org/10.3390/rs12152358