DOI QR코드

DOI QR Code

Experimental research on load-bearing capacity of cast steel joints for beam-to-column

  • Han, Qinghua (School of Civil Engineering, Tianjin University) ;
  • Liu, Mingjie (School of Civil Engineering, Tianjin University) ;
  • Lu, Yan (School of Civil Engineering, Tianjin University)
  • 투고 : 2014.12.24
  • 심사 : 2015.09.15
  • 발행 : 2015.10.10

초록

The load transfer mechanism and load-bearing capacity of cast steel joints for H-shaped beam to square tube column connection are studied based on the deformation compatibility theory. Then the monotonic tensile experiments are conducted for 12 specimens about the cast steel joints for H-shaped beam to square tube column connection. The findings are that the tensile bearing capacity of the cast steel joints for beam-column connection depends on the ring of cast steel stiffener. The tensile fracture happens at the ring of the cast steel stiffener when the joint fails. The thickness of square tube column has little influence on the bearing capacity of the joint. The square tube column buckles while the joint without concrete filled, but the strength failure happens for the joint with concrete filled column. And the length of welding connection between square tube column and cast steel stiffener has little influence on the load-bearing capacity of the cast steel joint. Finally it is shown that the load-bearing capacity of the joints for H-shaped beam to concrete filled square tube column connection is larger than that of the joints for H-shaped beam to square tube column connection by 10% to 15%.

키워드

참고문헌

  1. Ciutina, A.L. and Dubina, D. (2006), "Seismic behaviour of steel beam-to-column joints with column web stiffening", Struct. Eng. Mech., 6(6), 493-512.
  2. Design code (2001), Guide of design and construction of "HIBLADE process" of Hitachi, Tokyo. (in Japanese)
  3. Han, Q.H., Liu, M.J. and Lu, Y. (2015), "Mechanical behavior analysis of cast steel joints for H-shaped beam to square tube column", Journal of Tianjin University, Science and Technology. (in Chinese) (in press).
  4. Kimura, J. and Matsui, C. (2005), "Structural characteristics of H-shaped beam-to-square tube column connection with vertical stiffeners", Int. J. Steel Struct., KSSC, 5(2), 109-117.
  5. Morino, S. and Tsuda, K. (2003), "Design and construction of concrete-filled steel tube column system in Japan", Earthq. Eng. Eng. Seismol., 4(1), 51-73.
  6. Nakano, K., Kitano, T. amd Yoshinaga, K. et al. (2003), "Development of "HIBLADE process" with external stiffener rings using cast steel", Hitachi Metals Technical Review, 19, 67-70. (in Japanese)
  7. Rong, B., Chen, Z., Zhang, R., Fafitis, A. and Yang, N. (2013), "Experimental and analytical investigation of the behavior of diaphragm-through joints of concrete-filled tubular columns", J. Mech. Mater. Struct., 7(10), 909-929. https://doi.org/10.2140/jomms.2012.7.909
  8. Shin, K.J., Kim, Y.J. and Oh, Y.S. (2008), "Seismic behaviour of composite concrete-filled tube column-tobeam moment connections", J. Constr. Steel Res., 64(1), 118-127. https://doi.org/10.1016/j.jcsr.2007.04.001
  9. Skejic, D., Dujmovic, D. and Androic, B. (2008), "Behaviour of welded beam-to-column joints subjected to the static load", Struct. Eng. Mech., 29(1), 17-35. https://doi.org/10.12989/sem.2008.29.1.017
  10. Toellner, B.W., Watkins, C.E., Abbas, E.K. and Eatherton, M.R. (2015), "Experimental investigation on the seismic behavior of steel moment connections with decking attachments", J. Constr. Steel Res., 105, 174-185. https://doi.org/10.1016/j.jcsr.2014.11.006
  11. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill, New York.
  12. Wang, J.F., Han, L.H. and Uy, B. (2009), "Behaviour of flush end plate joints to concrete-filled steel tubular columns", J. Constr. Steel Res., 65(4), 925-939. https://doi.org/10.1016/j.jcsr.2008.10.010
  13. Wang J.F., Zhang, L. and Spencer, B. F. (2013), "Seismic response of extended end plate joints to concretefilled steel tubular columns", Eng. Struct., 49, 876-892. https://doi.org/10.1016/j.engstruct.2013.01.001
  14. Yin, Y., Han, Q.H., Bai, L.J., Yang, H.D. and Wang, S.P. (2009), "Experimental study on hysteretic behaviour of tubular N-joints", J. Constr. Steel Res., 65(2), 326-334. https://doi.org/10.1016/j.jcsr.2008.07.006

피인용 문헌

  1. The stability of semi-rigid skeletal structures accounting for shear deformations vol.57, pp.6, 2016, https://doi.org/10.12989/sem.2016.57.6.1065
  2. Experimental and Simulation Study on Seismic Behavior of Beam-Column Joints with Cast Steel Stiffener vol.142, pp.7, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001487
  3. Component method model for predicting the moment resistance, stiffness and rotation capacity of minor axis composite seat and web site plate joints vol.20, pp.3, 2016, https://doi.org/10.12989/scs.2016.20.3.469
  4. Seismic behavior of steel column-base-connection equipped by NiTi shape memory alloy vol.64, pp.1, 2015, https://doi.org/10.12989/sem.2017.64.1.109
  5. Material Parameters in Void Growth Model for G20Mn5QT Cast Steel: Calibration and Verification vol.32, pp.3, 2020, https://doi.org/10.1061/(asce)mt.1943-5533.0003065