Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Prefabricated-HSPRCC panels for retrofitting of existing RC members-a pioneering study

  • Received : 2014.09.20
  • Accepted : 2015.05.20
  • Published : 2015.10.10
⟨ Previous Next ⟩

Abstract

The main goal of this study was to develop a convenient strengthening technique for retrofitting of reinforced concrete members. For this purpose a new retrofitting material so-called prefabricated-HSPRCC (high performance steel plate reinforced cementitious composite) panel was developed by using high performance concrete and perforated steel plate. Prefabricated-HSPRCC composes advantages of steel and high performance concrete. The prefabricated-HSPRCC panels were either only bonded on the specimens using epoxy mortar or anchored to the specimen by steel bolts as well as bonding. Effect of different variations such as prefabricated-HSPRCC panel thicknesses, steel plate thicknesses, puncture orientation of perforated steel plate, existence of anchorage etc. were studied through a simple experimental work. The behaviour of the specimens under vertical point load was also studied by using simple mechanics. The retrofitted specimens were found to exhibit much better performance both in terms of strength and deformation capability. The anchorage application was found to positively affect this improved performance. Furthermore, as a result of the tests the best parameters of prefabricated-HSPRCC plate for improving strength and deformation capacities were determined.

Keywords

References

  1. Abdulhameed, S., Wu, E. and Ji, B. (2013), "Mechanical prestressing system for strengthening reinforced concrete members with prestressed carbon-fiber-reinforced polymer sheets", J. Perform. Constr. Facil., 29(3), 04014081. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000478
  2. Alcocer, S.M. and Jirsa, J.O. (1993), "Strength of reinforced concrete frame connections rehabilitated by jacketing", ACI Struct. J., 90(3), 249-261.
  3. Amoury, T. and Ghobarah, A. (2002), "Seismic rehabilitation of beam column joints using GFRP sheets." Eng. Struct., 24, 1397-1407. https://doi.org/10.1016/S0141-0296(02)00081-0
  4. Antonopoulos, C.P. and Triantafillou, T.C. (2003), "Experimental investigation of FRP-strengthened RC beam-column joints", ASCE J. of Compos. Constr., 7(1), 39-49. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:1(39)
  5. ASTM E519 (2002), "Standard test method for diagonal tension (shear) in masonry assemblages", American Society for Testing Materials, USA.
  6. Barros, J.A.O., Costa, I.G. and Ventura-Gouveia, A. (2011), "CFRP flexural and shear strengthening technique for RC beams: experimental and numerical research", J. Adv. Struct. Eng., 14(3), 551-557. https://doi.org/10.1260/1369-4332.14.3.551
  7. Bedirhanoglu, I. (2009), "The behavior of reinforced concrete members with low strength concrete under earthquake loads: an investigation and improvement", PhD Thesis, Istanbul Technical University, Istanbul, Turkey, DOI: 10.13140/2.1.1286.8480
  8. Bedirhanoglu, I., Ilki, A., Incecik, O. and Kumbaar, N. (2008), "Retrofit of concrete panels with prefabricated hpfrcc plates", 14 WCEE, The 14th World Conference on Earthquake Engineering, Beijing, China.
  9. Bedirhanoglu, I., Ilki, A., Pujol, S. and Kumbasar, N. (2010), "Seismic behavior of joints built with plain bars and low-strength concrete", ACI Struct. J., 107(3), 300-310.
  10. Bedirhanoglu, I., Ilki, A. and Kumbasar, N. (2013), "Precast fiber reinforced cementitious composites for seismic retrofit of deficient rc joints-A pilot study", Eng. Struct., 52, 192-206. https://doi.org/10.1016/j.engstruct.2013.02.020
  11. Bedirhanoglu, I. (2014), "A practical neuro-fuzzy model for estimating modulus of elasticity of concrete", Struct. Eng. Mech., 51(2), 249-265. https://doi.org/10.12989/sem.2014.51.2.249
  12. Biddah, A.M.S., Ghobarah, A. and Aziz, T.S. (1997), "Upgrading of non ductile reinforced concrete frame connections", ASCE J. Struct. Eng., 123(8), 1001-1010. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:8(1001)
  13. Collins, M.P., Vecchio, F.J. and Mehlhorn, G. (1985), "An international competition to predict the response of reinforced concrete panels", Can. J. Civil Eng., 12, 624-644. https://doi.org/10.1139/l85-070
  14. Durham, SA., Heymsfield, E. and Jones, J.X. (2009), "Retrofitting of precat bridge beams with carbon fiberreinforced polymer strips for shear capacity", ASCE J. Perform. Constr. Facil., 23(4), 219-226. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000012
  15. Gabor, A., Bennani, A., Jacquelin, E. and Lebon, F. (2006), "Modelling approaches of the in-plane shear behaviour of unreinforced and FRP strengthened masonry panels", Compos. Struct., 74(3), 277-288. https://doi.org/10.1016/j.compstruct.2005.04.012
  16. Gergely, J., Pantalides, C.P. and Reaveley, L.D. (2000), "Shear strengthening of RC T-joints using CFRP composites", ASCE J. Compos. Constr., 4(2), 56-64. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:2(56)
  17. Ghobarah, A. and Said, A. (2001), "Seismic rehabilitation of beam-column joints using FRP laminates", J. Earthq. Eng., 5(1), 113-129. https://doi.org/10.1080/13632460109350388
  18. Garcia, R., Hajirasouliha, I. and Pilakoutas, K. (2010), "Seismic Behaviour of Deficient RC Frames Strengthened with CFRP Composites", Eng. Struct., 32(10), 3075-3085. https://doi.org/10.1016/j.engstruct.2010.05.026
  19. Hamad, B.S. and Ibrahim, F.G. (2009), "Effect of FRP confinement on bond strength of hooked bars: normal strength concrete structures", ASCE J. Compos. Constr., 13(4), 279-291. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:4(279)
  20. Ilki, A., Bedirhanoglu, I., Candan, Y. and Kumbaar, N. (2007), "Retrofit of low strength concrete panels with frp sheets", FRPRCS-8 University of Patras, Patras, Greece.
  21. Ilki, A., Bedirhanoglu, I. and Kumbasar, N. (2008), "Seismic retrofit of beam-column joints with FRP sheets", Proc., 5th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-V), September, Winnipeg, Manitoba, Canada.
  22. Ilki, A., Peker, O., Karamuk, E., Demir, C. and Kumbasar, N. (2008), "FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns", J. Mater. Civil Eng., 20(2), 169-188. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:2(169)
  23. Ilki, A., Demir, C., Bedirhanoglu, I. and Kumbasar, N. (2009), "Seismic retrofit of brittle and low strength RC columns using fiber reinforced polymer and cementitious composites", J. Adv. Struct. Eng., 12(3), 325-347. https://doi.org/10.1260/136943309788708356
  24. Ilki, A., Bedirhanoglu, I. and Kumbasar, N. (2011), "Behavior of FRP retrofitted joints built with plain bars and low-strength concrete", ASCE J Compos. Constr., 15(3), 312-326. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000156
  25. Itoh, M., Katoh, Y. and Kanakubo, F.T. (2000), "Influence of concrete type and strength to shear behavior of RC panel", Tran. JPN Concrete Inst., 22, 393-398.
  26. Kanakubo, T. and Shindo, M. (1997), "Shear behavior of fiber-mesh reinforced plates." Proceedings of the Third International Symposium, Non-Metallic (FRP) Reinforcement for Concrete Structures, 2, 317-324.
  27. Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M. (2008), "Local retrofit of exterior RC beam-column joints using thin RC jackets-An experimental study", Earthq. Eng. Struct. Dyn., 37, 727-746. https://doi.org/10.1002/eqe.783
  28. Karbhari, V. and Gao, Y. (1997), "Composite jacketed concrete under uniaxial compression-verification of simple design equations", J. Mater. Civil Eng., 9(4), 185-193. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(185)
  29. Lee, K.S., Lee, S.H. and Shin, S.W. (2013), "Shear behavior of reinforced concrete beams strengthened by epoxy mortar panel with steel fibers", J. Adv. Struct. Eng., 16(6), 987-1000. https://doi.org/10.1260/1369-4332.16.6.987
  30. Li, V.C., Stang, H. and Krenchel, H. (1993), "Micromechanics of crack bridging in fiber-reinforced concrete", Mater. Struct., 26(162), 486-494. https://doi.org/10.1007/BF02472808
  31. Lin, M.L., Chen, P.C., Tsai, K.C., Yu, Y.J. and Liu, J.G. (2010), "Seismic steel jacketing of rectangular RC bridge columns for the mitigation of lap-splice failures", Earthq. Struct. Dyn., 39(15), 1687-1710. https://doi.org/10.1002/eqe.1003
  32. Lu, X. and Hsu, C.T.T. (2006), "Behavior of high strength concrete with and without steel fiber reinforcement in triaxial compression", Cement Concrete Res., 36(9), 1679-1685. https://doi.org/10.1016/j.cemconres.2006.05.021
  33. Mosallam, A.S. (2000), "Strength and ductility of RC frame connections strengthened with quasi-isotropic laminates", Compos. Part B, 31(6-7), 481-497. https://doi.org/10.1016/S1359-8368(99)00068-2
  34. Mosalam, K.M., Stephen, A.M. and Rojansky, M. (2003), "Evaluation of seismic performance and retrofit of lightweight reinforced concrete shear walls", ACI Struct. J., 100(6), 693-703.
  35. Mukherjee, A. and Joshi, M. (2005), "FRPC reinforced concrete beam-column joints under cyclic excitation", Compos. Struct., 70(2), 185-199. https://doi.org/10.1016/j.compstruct.2004.08.022
  36. Nagaprasad, P., Sahoo, D.R. and Rai, D.C. (2009), "Seismic strengthening of RC column using external steel cage", Earthq. Struct. Dyn., 38(14), 1563-1586. https://doi.org/10.1002/eqe.917
  37. Niroomandi, A., Maheri, A., Maheri, M.R. and Mahini, S.S. (2010), "Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets", Eng. Struct., 32(8), 2326-2336. https://doi.org/10.1016/j.engstruct.2010.04.008
  38. Pantelides, C.P., Okahashi, Y. and Reaveley, L.D. (2008), "Seismic rehabilitation of reinforced concrete frame interior beam-column joints with FRP composites", ASCE J. Compos. Constr., 12(4), 435-445. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:4(435)
  39. Prota, A., Nanni, A., Manfredi, G. and Cosenza, E. (2003), "Capacity assessment of RC subassemblages upgraded with CFRP", J. Reinf. Plast. Compos., 22(14), 1287-1304. https://doi.org/10.1177/0731684403035580
  40. Shah, S.P. (1991), "Do fibers increase the tensile strength of cement-based matrices", ACI Mater. J., 88(6), 595-602.
  41. Shannag, M.J., Barakat, S. and Jaber, F. (2001), "Structural repair of shear-deficient reinforced concrete beams using SIFCON", Mag. Concrete Res., 53(6), 391-403. https://doi.org/10.1680/macr.2001.53.6.391
  42. Shannag, M.J., Abu-Dyya, N. and Abu-Farsakh, G. (2005), "Lateral load response of high performance fiber reinforced concrete beam-column joints", Constr. Build. Mater., 19(7), 500-508. https://doi.org/10.1016/j.conbuildmat.2005.01.007
  43. TS138 EN 10002-1 (2004), "Metallic materials-tensile testing-Part 1: method of test at ambient temperature", Turkish Standards Institute (TSE), Ankara, Turkey.
  44. TS 500 (2000), "Requirements for design and construction of reinforced concrete structures", Turkish Standards Institute (TSE), Ankara, Turkey.
  45. Tsonos, A.G. (2002), "Seismic repair of exterior R/C beam-to-column joints using two sided jackets", Struct. Eng. Mech., 13(1), 17-34. https://doi.org/10.12989/sem.2002.13.1.017
  46. Tsonos, A.G. (2008), "Effectiveness of CFRP-jackets in post-earthquake and pre-earthquake retrofitting of beam-column subassemblages", Eng. Struct., 30, 777-793. https://doi.org/10.1016/j.engstruct.2007.05.008
  47. Tsonos, A.G. (2010), "Performance enhancement of R/C building columns and beam-column joints through shotcrete jacketing", Eng. Struct., 32(3), 726-740. https://doi.org/10.1016/j.engstruct.2009.12.001
  48. Xiao, Y. and Wu, H. (2000), "Compressive behavior of concrete confined by carbon fiber composite jackets", J. Mater. Civil Eng., 12(2), 139-146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139)
  49. Xiao, Y. (2004), "Applications of FRP composites in concrete columns", J. Adv. Struct. Eng., 7(4), 335-343. https://doi.org/10.1260/1369433041653552
  50. Valluzzi, M.R., Tinazzi, C. and Modena, C. (2002), "Shear behavior of masonry panels strengthened by frp laminates", Constr. Build. Mater., 16(7), 409-416. https://doi.org/10.1016/S0950-0618(02)00043-0
  51. Vecchio, F.J. and Nieto, M. (1991), "Shear-friction tests on reinforced concrete panels", ACI Struct. J., 88(3), 371-379.
  52. Wu, H., Sun, P. and Teng, J. (2010), "Development of fiber-reinforced cement-based composite sheets for structural retrofit", J. Mater. Civil Eng., 22(6), 572-579. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000056
  53. Yen, J.Y.R. and Chien, H.K. (2010), "Steel plates rehabilitated RC beam-column joints subjected to vertical cyclic loads", Constr. Build. Mater., 24(3), 332-339. https://doi.org/10.1016/j.conbuildmat.2009.08.029
  54. Yoshitake, I., Inamori, A., Hamada, S. and Hisabe, N. (2006), "Pure shearing behaviour of concrete element with carbon fiber sheet", Proceedings of the 2nd International Congress, Naples, Italy.