Applied Chemistry for Engineering (공업화학)

The Korean Society of Industrial and Engineering Chemistry (한국공업화학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation of Porous Anti-Insect Repellent Powder Using Spray Drying of Medicinal Herbal Extracts Anti-Insect Repellent Silica Sol

분무건조법을 이용한 한약추출물 해충기피 실리카 졸의 다공성 방충입자의 제조

  • Received : 2015.06.05
  • Accepted : 2015.09.01
  • Published : 2015.10.10
Download PDF
⟨ Previous Next ⟩

Abstract

Anti-insect repellent silica sol from mixture with silica and anti-insect repellent solution extracted from medicinal herbs was prepared. The micron size porous sphere powder with anti-insect repellent solution was prepared by the spray drying method. The characteristic of anti-insect repellent powder using spray drying method was analyzed by FE-SEM, PSA, TGA with the concentration of anti-insect repellent sol (anti-insect repellent solution and silica) and conditions of spray drier. The average particle size of 4, 7 wt% and 10 wt% of anti-insect repellent sol concentration were 8.3, $9.5{\mu}m$ and $11.7{\mu}m$, respectively. The particle size is increasing with high concentration of anti-insect repellent sol. Other hands, particle size as the temperature of inlet nozzle and velocity of sol injection were nearly same at high velocity of gas injection. Also, Anti-insect repellent impregnation in porous sphere powder were confirmed by TGA methode and its thermal property was stable up to $200^{\circ}C$. We expect that anti-insect repellent powder is applied for plastic compound and process of film manufacture.

한약재에서 추출한 해충기피용액과 실리카를 혼합하여 해충기피 실리카 졸을 제조하고, 분무건조법을 이용하여 마이크로 단위의 해충기피용액이 포함된 다공성 구형 분말을 제조하였다. 분무건조법을 통해 제조된 해충기피 분말의 특성분석을 위해 해충기피 졸의 농도(해충기피용액, 실리카) 및 분무 건조 장비의 조건에 따라 분말 모폴로지, 입자크기별 입경분포, 열적 안정성 분석을 실시하였다. 해충기피 졸의 농도가 4, 7 wt% 및 10 wt%일 때 각각 평균 입자 크기가 8.3, $9.5{\mu}m$ 및 $11.7{\mu}m$ 순으로 농도가 증가할수록 분말의 직경이 커졌다. 반면에 빠른 가스 주입속도 상태에서 노즐입구온도 및 용액주입속도 증가에 의한 분말 입경의 증가는 미미하였다. 또한, 열중량 분석법을 통하여, 구형의 다공성 분말 안에 해충기피 용액이 담지 되어있고, 이들은 $200^{\circ}C$까지 열적 안정성이 확보됨을 확인하였다. 분무건조를 통한 해충기피 분말은 평균 $9{\sim}10{\mu}m$이고, 열적 안정성을 가지므로 컴파운딩 및 필름제조공정에 응용이 가능할 것으로 기대된다.

Keywords

References

  1. Y. J. Lee, S. C. Min, J. H. Na, and J. J. Han, Demand for Insect-Proof Packaging Technology in Food Application, Safe food, 6, 24-30 (2011).
  2. S. H. Lee, H. J. Jo, Y. J. Lee, and J. J. Han, Development of a Fennel (Foeniculum vulgare) Oil-based Anti-insect Sachet to Prevent the Indian Meal Moth (Plodia interpunctella), Korean J. Packag. Sci. Technol., 19, 81-85 (2013).
  3. J. H. Park, K. Y. Ryu, H. J. Jee, B. M. Lee, and H. G. Gho, Evaluation of Insecticidal Activity of Plant Extracts against Three Insect Pests, Korean J. Appl. Entomol., 47, 59-64 (2008). https://doi.org/10.5656/KSAE.2008.47.1.059
  4. A. S. You, Y. W. Choi, M. H. Jeong, S. S. Hong, Y. K. Park, H. S. Jang, J. Y. Park, and K. H. Park, Acute Ecotoxicity Evalution of Thyme White, Clove Bud, Cassia, Lavender, Lemon Eucalytus Essential Oil of Plant Extracts, Korean J. Pestic. Sci., 15, 350-356 (2011).
  5. F. V. Leimann, O. H. Goncalves, R. A. F. Machado, and A. Bolzan, Antimicrobial activity of microencapsulated lemongrass essential oil and the effect of experimental parameters on microcapsules size and morphology, Mater. Sci. Eng. C, 29, 430-436 (2009). https://doi.org/10.1016/j.msec.2008.08.025
  6. J. O. Nam, C. H. Choi, J. M. Kim, S. M. Kang, and C. S. Lee, Fabrication of Polymeric Microcapsules in a Microchannel using Formation of Double Emulsion, Korean Chem. Eng. Res., 51, 597-601 (2013). https://doi.org/10.9713/kcer.2013.51.5.597
  7. S. R. Hwang, C. H. Choi, and C. S. Lee, Regioselective Surface Modification of PDMS Microfluidic Device for the Generation of Monodisperse Double Emulsions, Macromol. Res., 20, 422-428 (2012). DOI 10.1007/s13233-012-0048-8.
  8. S. R. Hwang, C. H. Choi, H. C. Kim, I. H. Kim, and C. S. Lee, In situ Mircofludic Method for the Generation of Monodisperse Double Emulsions, Polym.(Korea), 36, 177-181 (2012).
  9. H. S. Hwang, I. Park, I. K. Lee, W. J. Choi, S. I. Lee, and J. Y. Lee, Synthesis and Characterization of Carbon Dioxide Sorbent by using Polyethyleneimine Impregnated Fumed Silica Particles, Appl. Chem. Eng., 23, 383-387 (2012).
  10. W. Liu, W. D. Wu, C. Selomulya, and X. D. Chen, Facile Spray-Drying Assembly of Uniform Microencapsulates with Tunable CoreShell Structures and Controlled Release Properties, Langmuir, 27, 12910-12915 (2011). https://doi.org/10.1021/la203249v
  11. C. K. Youn, H. M. Lim, S. J. Cha, D. S. Kim, and S. H. Lee, Preparation of Hollow Silica by Spray Drying of Nano Silica Particles and Its Heat Transfer Property, Kor. J. Mater. Res., 22. 531-538 (2012). https://doi.org/10.3740/MRSK.2012.22.10.531
  12. F. Iskandar, L. Gardon, and K. Okuyama, Control of the morphology of nanostructured particles prepared by the spray drying of a nanoparticle sol, J. colloid interface Sci., 265, 296-303 (2003). https://doi.org/10.1016/S0021-9797(03)00519-8
  13. F. Iskandar, I. W. Lenggoro, B. Xia, and K. Okuyama, Functional nanostructured silica powders derived from colloidal suspensions by sol spraying, J. Nanopart. Res., 3, 263-270 (2001). https://doi.org/10.1023/A:1017592817667
  14. Y. K. Kim, K. H. Kim, J. J. Lee, H. S. Lee, and S. G. Lee, Fumigant Toxicity and the Repellent Effect of Essential Oils against Sitophilus zeamais Motschulsky, Korean J. Appl. Entomol., 51, 389-395 (2012). https://doi.org/10.5656/KSAE.2012.09.0.052
  15. J. S. Song, C. M. Lee, S. M Lee, D. S. Kim, Y. W. Choi, and D. W. Lee, Korean J. Pestic. Sci., 17, 411-418 (2013). https://doi.org/10.7585/kjps.2013.17.4.411
  16. D. W. Lee, H. C. Choi, T. S. Kim, J. K. Park, J. C. Park, H. B. Yu, S. M. Lee, and H. Y. Cho, Effect of Some Herbal Extracts on Entomopathogenic Nematodes, Silkworm and Ground Beetles, Korean J. Appl. Entomol., 48, 335-345 (2009). https://doi.org/10.5656/KSAE.2009.48.3.335
  17. H. J. Jung, Y. B. Kim, and Y. H. Chang, Preparation of Silica/collagen Microsphere Composit Doped with Silver Nanoparticles, Korean Chem. Eng. Res., 46, 722-726 (2008).
  18. H. S. Kim, A Study on the Control of Structure Characteristics of porous Silica, J. Kor. Ins. Chem. Eng., 27, 299-308 (1989).
  19. H. Takeuchi, S. Nagira, H. Yamamoto, and Y. Kawashima, Solid dispersion particles of amorphous indomethacin with fine porous silica particles by using spray-drying method, Int. J. Pharm., 293, 155-164 (2005). https://doi.org/10.1016/j.ijpharm.2004.12.019
  20. A. J. Wang, Y. P. Lu, and R. X. Sun, Recent progress on the fabrication of hollow microspheres, Mater. Sci. Eng. A, 460-465, 1-6 (2007).
  21. D. Sen, S. Mazumder, J. S. Melo, A. Khan, S. Bhattyacharya, and S. F. D'Souza, Evaporation Driven Self-Assembly of a Colloidal Dispersion during Spray Drying: Volume Fraction Dependent Morphological Transition, Langmuir, 25, 6690-6695 (2009). https://doi.org/10.1021/la900160z

Cited by

  1. 미세액적 유동반응기 공정에서 연속제조된 나노구조 SiO2:Zn 원환형 입자의 특성 vol.56, pp.4, 2018, https://doi.org/10.9713/kcer.2018.56.4.585
  2. 매실 식초 분말의 항산화 및 유방암 세포주 증식 억제 효과 vol.31, pp.2, 2015, https://doi.org/10.5352/jls.2021.31.2.149